ajr23
FTW Member
- Total Posts : 1183
- Reward points : 0
- Joined: 2009/04/04 11:34:18
- Location: Issaquah, Wa
- Status: offline
- Ribbons : 4
Re:Get It Colder......2
2010/02/18 16:05:50
(permalink)
reggiesanchez
Sounds pretty hot. Trust me unless you are going for a cpuiz max overclock I would not go any higher untill you can get it colder. I break alot of things and learn stuff the hard way, cpu gets a little warmer during a vantage run than a p95 blend test will get it. As far as your cpu goes maybe you have reached your limit. 4.6 is fine to bench with if your stable just work on your gpu clocks for the moment.
hehe uber post
the 80c isn't with blend it is with large fft's, i don't think that i have reached the limit it's just that i can't boot any higher than 220 right now and i have yet to mess with eleet. as for getting my temps better i hope that the new radiator will take care of that problem and the colder temps at night this weekend will help also.
|
ShockTheMonky
CLASSIFIED Member
- Total Posts : 2882
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/02/18 16:34:24
(permalink)
Having a bit of a problem with 3DMark03 right now. I ran the patch they have for it at FutureMark and now it doesn't want to let me make any uploads Public. My copy is registered.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
reggiesanchez
FTW Member
- Total Posts : 1124
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/02/18 16:46:33
(permalink)
ajr23
reggiesanchez
Sounds pretty hot. Trust me unless you are going for a cpuiz max overclock I would not go any higher untill you can get it colder. I break alot of things and learn stuff the hard way, cpu gets a little warmer during a vantage run than a p95 blend test will get it. As far as your cpu goes maybe you have reached your limit. 4.6 is fine to bench with if your stable just work on your gpu clocks for the moment.
hehe uber post
the 80c isn't with blend it is with large fft's, i don't think that i have reached the limit it's just that i can't boot any higher than 220 right now and i have yet to mess with eleet. as for getting my temps better i hope that the new radiator will take care of that problem and the colder temps at night this weekend will help also.
Oh well that changes everything 80 at with large fft is pretty good. I would try messing with the pcie speed. I really wish I could help more but I can only get to 223 and bench at 221, ive had a few lucky boots past that but nothing steady. So good luck but it sounds like your on the right track just keep tweaking.
|
johnksss
CLASSIFIED Member
- Total Posts : 3567
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re:Get It Colder......2
2010/02/18 16:59:36
(permalink)
hummm...never installed this patch...i would uninstall and reinstall first version.
when i get a chance...ill install and see what happens to me.
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
ShockTheMonky
CLASSIFIED Member
- Total Posts : 2882
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/02/18 17:17:44
(permalink)
I have. Does the same thing.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 2229
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/02/18 17:20:33
(permalink)
ShockTheMonky
Having a bit of a problem with 3DMark03 right now. I ran the patch they have for it at FutureMark and now it doesn't want to let me make any uploads Public. My copy is registered.
Well, Monkey, I think your stuck. I had this exact same problem pre & post patch. It's the CPU itself.....system info won't read my 920, but when I drop my 960 in, it reads that fine. I can make my 960 public, but not my 920. There is a FAQ on futuremark's site regarding this....but they don't give any answer other than your hosed. If you're not in the top 20, you don't need the FM link anyway. Just be sure to take good screen shots with as much info as possible as to never be questioned.
Mobo: Asus Rampage VI Extreme CPU: i9-7980XE GPU: RTX 3090 KPE HD: Samsung 1TB 970 Pro NVMe M.2 PSU: EVGA Supernova 1600 T2 OS: All of them Monitor: 48" LG CX OLED Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion  
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 2229
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/02/18 17:24:50
(permalink)
BTW, everyone, if you load all the new FM patches, you won't be able to submit an old saved score run on the pre-patch version. You'll have to uninstall and reinstall the old version. (Hopefully everyone saves their old FM installer package files).
I also recommend the patches, as the benches load much, much faster. Ever feel like punching JN waiting for 'er to load? not anymore. And on 3dm05, you don't have to wait an eon for the score to pop up.
Mobo: Asus Rampage VI Extreme CPU: i9-7980XE GPU: RTX 3090 KPE HD: Samsung 1TB 970 Pro NVMe M.2 PSU: EVGA Supernova 1600 T2 OS: All of them Monitor: 48" LG CX OLED Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
johnksss
CLASSIFIED Member
- Total Posts : 3567
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re:Get It Colder......2
2010/02/18 17:56:09
(permalink)
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
ShockTheMonky
CLASSIFIED Member
- Total Posts : 2882
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/02/18 19:02:37
(permalink)
Been using W3520 with no problem. Been letting me make public for a long time. Not till I installed patch did it go to hell. I ran the patch for all releases but 03 is only one that's screwed up.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
dlb134
iCX Member
- Total Posts : 432
- Reward points : 0
- Joined: 2010/02/01 12:17:44
- Status: offline
- Ribbons : 0
Re:Get It Colder......2
2010/02/18 19:16:21
(permalink)
ShockTheMonky
Been using W3520 with no problem. Been letting me make public for a long time. Not till I installed patch did it go to hell. I ran the patch for all releases but 03 is only one that's screwed up.
Use revo uninstaller to get rid of it and all of it's registry entries, then reinstall. It is highly improbably that it actually affected the cpu.
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 2229
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/02/18 19:19:23
(permalink)
No it won't do anything to the cpu....the application just can't tell what cpu it is
Mobo: Asus Rampage VI Extreme CPU: i9-7980XE GPU: RTX 3090 KPE HD: Samsung 1TB 970 Pro NVMe M.2 PSU: EVGA Supernova 1600 T2 OS: All of them Monitor: 48" LG CX OLED Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
ShockTheMonky
CLASSIFIED Member
- Total Posts : 2882
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/02/18 19:29:11
(permalink)
I've fully uninstalled w/reg entries removed. reinstalled with it requesting registration key, shows 3.60 and not 3.61 in Programs and Features and still will not let me make public.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 2229
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/02/18 20:59:49
(permalink)
I never could get my 920 to be recognized, and therefore was not successful at making the scores public.
Look in the upper right hand corner of the 3dm03 window (before you push the run button). What does it say for cpu? Unknown, right?
Mobo: Asus Rampage VI Extreme CPU: i9-7980XE GPU: RTX 3090 KPE HD: Samsung 1TB 970 Pro NVMe M.2 PSU: EVGA Supernova 1600 T2 OS: All of them Monitor: 48" LG CX OLED Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
ShockTheMonky
CLASSIFIED Member
- Total Posts : 2882
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/02/18 21:08:52
(permalink)
That's not the problem. Before the patch it would let me make all uploads public. I have Pro version. The Demo version allows only a few uploads if I remember. As for it reading my cpu correctly. That's never been a problem. Take a look see. http://service.futuremark.com/compare?2k3=6261260
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 2229
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/02/18 21:15:34
(permalink)
Yea, that was before the patch....Right now what does 3dm03 read as your processor?
Mobo: Asus Rampage VI Extreme CPU: i9-7980XE GPU: RTX 3090 KPE HD: Samsung 1TB 970 Pro NVMe M.2 PSU: EVGA Supernova 1600 T2 OS: All of them Monitor: 48" LG CX OLED Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
johnksss
CLASSIFIED Member
- Total Posts : 3567
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re:Get It Colder......2
2010/02/18 21:16:08
(permalink)
you got me kind of scared to try it right now...right when im getting ready to run some 03 benchies
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
ShockTheMonky
CLASSIFIED Member
- Total Posts : 2882
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/02/18 21:19:53
(permalink)
Yes it still reads it correctly.
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 2229
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/02/18 21:21:00
(permalink)
here's what futuremark says...I guess it could be your gpu not being read right too.
Q: I can't publish my project, what gives?
A: Check your project. There is a possibility that SystemInfo has partially failed and your CPU or Display Adapter information was incomplete. This is seen by the user that CPU/DA information is either displayed as "Unknown" or the field is blank. This is unfortunate, but you still can submit your project. Unfortunately, since the projects details are incomplete thus making the project invalid, you can't publish it.
Mobo: Asus Rampage VI Extreme CPU: i9-7980XE GPU: RTX 3090 KPE HD: Samsung 1TB 970 Pro NVMe M.2 PSU: EVGA Supernova 1600 T2 OS: All of them Monitor: 48" LG CX OLED Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
ShockTheMonky
CLASSIFIED Member
- Total Posts : 2882
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/02/18 21:26:41
(permalink)
I'm off the system right now but if that's the case then the patch screwed it up because after full uninstall and installing with reg key, I still can't publish even without reinstalling the patch.
post edited by ShockTheMonky - 2010/02/18 21:46:24
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
johnksss
CLASSIFIED Member
- Total Posts : 3567
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re:Get It Colder......2
2010/02/18 21:37:05
(permalink)
let me check to make sure they aren't down from the 03 or something...i have 3 os's to boot from. i can always restore if it messes it up. edit: i just installed it on a win 7 64 bit and it submitted fine. installing the patch now and will attempt to resubmit. ok...im updated and working fine. getting ready to reboot now.
post edited by johnksss - 2010/02/18 21:59:30
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
reggiesanchez
FTW Member
- Total Posts : 1124
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/02/18 22:38:38
(permalink)
are you guys using 10.2??????
|
johnksss
CLASSIFIED Member
- Total Posts : 3567
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re:Get It Colder......2
2010/02/18 22:43:18
(permalink)
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 2229
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/02/19 06:22:35
(permalink)
What's 10.2? catalyst driver?
Mobo: Asus Rampage VI Extreme CPU: i9-7980XE GPU: RTX 3090 KPE HD: Samsung 1TB 970 Pro NVMe M.2 PSU: EVGA Supernova 1600 T2 OS: All of them Monitor: 48" LG CX OLED Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
ShockTheMonky
CLASSIFIED Member
- Total Posts : 2882
- Reward points : 0
- Joined: 2006/01/28 18:41:25
- Status: offline
- Ribbons : 45
Re:Get It Colder......2
2010/02/19 07:41:35
(permalink)
" Psst. Zip up. Your ignorance is showing." " I don't suffer from insanity. I enjoy every minute of it!" " Can an Atheist get insurance for acts of god?
|
reggiesanchez
FTW Member
- Total Posts : 1124
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/02/19 10:24:15
(permalink)
I havent got a vantage run past cpu tests since I installed catalyst 10.2, alot better to game on but really want a bench score I gave up last night trying again now. I see you figured out aquamark shock, nice runs.
|
reggiesanchez
FTW Member
- Total Posts : 1124
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/02/19 10:55:48
(permalink)
Something wierd is going one. I have a vga power supply that I just hooked my card up to to give my cpu more power. Jon I think its the same one you have thermaltake toughpower 650w vga psu. Usually when I had it hooked up, and on the power led and which ever of the 12v rails I am usings led comes on. Now the 12v rail led goes off in between tests and during 2d mode??? Does the card only pull power from the board in 2d mode?? Seems unlikely. Not really sure what to make of this I guess ill keep testing and see.
Oh yea not the drivers that were keeping me from passing the tests it was my 9600. Buzzkill I really liked the idea of having two differnt cards to bench in my rig.
|
reggiesanchez
FTW Member
- Total Posts : 1124
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/02/19 11:14:38
(permalink)
Just failed another vantage run for some reason my gpu says its not pulling any power from 12v rails during cpu tests is that even possible.
|
Q56_Monster
CLASSIFIED Member
- Total Posts : 2229
- Reward points : 0
- Joined: 2007/11/02 11:03:10
- Location: Philly 'Burbs
- Status: offline
- Ribbons : 5
Re:Get It Colder......2
2010/02/19 18:07:58
(permalink)
I have that 650w express too. I had it hooked up when my main psu blew back in December. I've never trusted it again since that night, since I don't know if it was somehow involved with the toasting of my 1000w psu. I've heard others have had problems with it, but John and Hallowen used it for quite some time without nary an issue. Your issue might be related to the 650w power express unit.
Mobo: Asus Rampage VI Extreme CPU: i9-7980XE GPU: RTX 3090 KPE HD: Samsung 1TB 970 Pro NVMe M.2 PSU: EVGA Supernova 1600 T2 OS: All of them Monitor: 48" LG CX OLED Other Cooling Fun: F1 Gemini/Tek-9 Fat LN2 | 12k BTU A/C to Chiller Conversion
|
johnksss
CLASSIFIED Member
- Total Posts : 3567
- Reward points : 0
- Joined: 2008/06/21 10:18:46
- Location: Orange County, California
- Status: offline
- Ribbons : 3
Re:Get It Colder......2
2010/02/19 18:18:04
(permalink)
still got mine and running like a champ...they only way it would have problems and people dont notice it..is they will splice the green wire someshere along the install and the unit will eventually ground out
MSI MEG Z690 UNIFY-X | I9-12900K | 32GB G.Skill Trident Z5 6400Mhz | 1600W EVGA T2 | EVGA 3090 K|ngP|n | Custom Water Cooling Loop | Praxis Wet Bench SX Pro - Flat Edition
HWBOT-PROFILE
|
reggiesanchez
FTW Member
- Total Posts : 1124
- Reward points : 0
- Joined: 2009/01/25 23:24:23
- Status: offline
- Ribbons : 2
Re:Get It Colder......2
2010/02/19 18:27:10
(permalink)
are you running yours right now jon do your 12vrails go on and off or are they always on. Mine were always on with my 280 now it goes off when ever im in 2d mode with the 5850.
I see you got a new toy sniper
|