kiel^cx
SSC Member
- Total Posts : 800
- Reward points : 0
- Joined: 9/24/2009
- Status: offline
- Ribbons : 0
Friday, December 11, 2009 3:36 AM
(permalink)
any advise on my temps? should i count on the temps shown at eleet or realtemp?  THIS IS MY IDLE TEAMP 
post edited by kiel^cx - Friday, December 11, 2009 11:39 PM
Attached Image(s)
|
Foellarbear
SSC Member
- Total Posts : 526
- Reward points : 0
- Joined: 8/31/2009
- Location: The Volunteer State
- Status: offline
- Ribbons : 2
Re:do these temps look fine?
Friday, December 11, 2009 3:52 AM
(permalink)
are you serious???? those are amazing temps for an OC like that. are you watercooled? well you have to be.... I would assume.
Cooler Master HAF 932 Build: -Intel Core i7 920@ 3.8 GHz (C0/C1) -Cooler Master V8 -MSI x58 Pro -EVGA & PNY GTX 295's in QUAD SLI -6 GB DDR3 Triple Channel OC'ed (1440 MHz) -PC Power & Cooling 910 Silencer -Windows 7 Ultimate 64 bit I have Polar Bear Pride! Do you?
I fold everday to help save people's lives.
|
Bkatt
Omnipotent Enthusiast
- Total Posts : 10590
- Reward points : 0
- Joined: 2/22/2009
- Location: The Deserts of Arizona, US
- Status: offline
- Ribbons : 39
Re:do these temps look fine?
Friday, December 11, 2009 4:47 AM
(permalink)
your temps are great dude.. i cant see you sig due to my work filters...
what kinda OC are you running and what CPU cooler?
|
B3NJ1
iCX Member
- Total Posts : 332
- Reward points : 0
- Joined: 8/21/2009
- Status: offline
- Ribbons : 1
Re:do these temps look fine?
Friday, December 11, 2009 6:14 AM
(permalink)
Question, do you have HT enabled?
 X58 Classified - E760 ... i7 920 (D0) @ 4210mhz .... G Skill Trident 6gb @ 1600MHz 7-8-7-20 EVGA GTX 570 Superclocked Edition - TRI SLI My Affiliate Code: ZIQXDYRZ56
|
kiel^cx
SSC Member
- Total Posts : 800
- Reward points : 0
- Joined: 9/24/2009
- Status: offline
- Ribbons : 0
Re:do these temps look fine?
Friday, December 11, 2009 1:08 PM
(permalink)
burning_kittins
your temps are great dude.. i cant see you sig due to my work filters...
what kinda OC are you running and what CPU cooler?
i am getting stable @ 4.2GHZ
|
eppopipe
CLASSIFIED Member
- Total Posts : 2239
- Reward points : 0
- Joined: 6/28/2009
- Status: offline
- Ribbons : 7
Re:do these temps look fine?
Friday, December 11, 2009 2:55 PM
(permalink)
Use linx to test
that will really stress out your components, then youlll know if your temps are too high :)
Btw- post up your volts,vtt, cooling method, and ht on/off
|
kiel^cx
SSC Member
- Total Posts : 800
- Reward points : 0
- Joined: 9/24/2009
- Status: offline
- Ribbons : 0
Re:do these temps look fine?
Friday, December 11, 2009 3:12 PM
(permalink)
chriscbenjamin
Question, do you have HT enabled?
Yes, its HT enabled.
|
kiel^cx
SSC Member
- Total Posts : 800
- Reward points : 0
- Joined: 9/24/2009
- Status: offline
- Ribbons : 0
Re:do these temps look fine?
Friday, December 11, 2009 3:15 PM
(permalink)
eppopipe
Use linx to test
that will really stress out your components, then youlll know if your temps are too high :)
Btw- post up your volts,vtt, cooling method, and ht on/off
i will post my template when i get home.
|
tulsageoff
New Member
- Total Posts : 67
- Reward points : 0
- Joined: 5/18/2009
- Status: offline
- Ribbons : 0
Re:do these temps look fine?
Friday, December 11, 2009 3:17 PM
(permalink)
24/7 Folding/Gaming Rig
i7 920 D0 3849B203 @ 4.47ghz 1.35v HT on, EVGA Classified, EVGA 285gtx FTW, Dominator GT 1866,
Corsair 1000HX, Lian Li g70, Hanns-G 28"
Watercooled with HK 3.0, PA 120.3, DDC + Petra top
Check out my PC: http://www.youtube.com/watch?v=Hw9IDesNZhc
|
mikotan
iCX Member
- Total Posts : 419
- Reward points : 0
- Joined: 5/28/2008
- Status: offline
- Ribbons : 10
Re:do these temps look fine?
Friday, December 11, 2009 4:01 PM
(permalink)
i have a feeling your gonna peak your temps a tad high.
your minimum idle temps seem very high 55c+?
if so maybe either lower your OC or turn HT off.
Although it will depend on ambient temps and set up as well,
linx would normally add 20-35c to idle temps on water and more on air.
Please be careful and take note that 85c is the limit for these procs.
good luck.
|
kiel^cx
SSC Member
- Total Posts : 800
- Reward points : 0
- Joined: 9/24/2009
- Status: offline
- Ribbons : 0
Re:do these temps look fine?
Friday, December 11, 2009 4:26 PM
(permalink)
mikotan
i have a feeling your gonna peak your temps a tad high.
your minimum idle temps seem very high 55c+?
if so maybe either lower your OC or turn HT off.
Although it will depend on ambient temps and set up as well,
linx would normally add 20-35c to idle temps on water and more on air.
Please be careful and take note that 85c is the limit for these procs.
good luck.
thanks for your comment, i turned on real temp when i have 100%full load with prime95 running, that's why you seeing the minimum temps so high=]
|
whodaddy
SSC Member
- Total Posts : 654
- Reward points : 0
- Joined: 6/3/2007
- Location: Arizona
- Status: offline
- Ribbons : 3
Re:do these temps look fine?
Friday, December 11, 2009 6:02 PM
(permalink)
What is the TJ max set at in your core temp?
E-759 CLASSIFIED & I7 920 DO B261
OCZ DDR 3 1600 Gold 6GS / TFC 480 and TFC 360 w KOOLANCE RAD SUPPORT 2x655 PUMPS IN SERIES/ BITS 150Z RES
EK FULL COVERAGE BLOCK / BITS COMPRESSION/ROTARY FITTINGS
EK HF SUPREME PLEXI COPPER CPU BLOCK 1/2X5/8 TUBING
2x GTX 470 SC W EK BLOCKS/WD 150 RADPTOR WD 300 RAPTOR WD 1TB CORSAIR 800D CASE/CORSAIR HX-1000 http://www.heatware.com/eval.php?id=67849 
|
kiel^cx
SSC Member
- Total Posts : 800
- Reward points : 0
- Joined: 9/24/2009
- Status: offline
- Ribbons : 0
Re:do these temps look fine?
Friday, December 11, 2009 6:07 PM
(permalink)
whodaddy
What is the TJ max set at in your core temp?
85
|
mikotan
iCX Member
- Total Posts : 419
- Reward points : 0
- Joined: 5/28/2008
- Status: offline
- Ribbons : 10
Re:do these temps look fine?
Friday, December 11, 2009 6:07 PM
(permalink)
mmm... you sure?
the screenshot you provided says you just started the tests x.X?
oh well. just be careful not to exceed 85c and your good. take care.
|
kiel^cx
SSC Member
- Total Posts : 800
- Reward points : 0
- Joined: 9/24/2009
- Status: offline
- Ribbons : 0
Re:do these temps look fine?
Friday, December 11, 2009 6:11 PM
(permalink)
mikotan
mmm... you sure?
the screenshot you provided says you just started the tests x.X?
oh well. just be careful not to exceed 85c and your good. take care.
i'll post my idle temp when i get home tonight
|
B3NJ1
iCX Member
- Total Posts : 332
- Reward points : 0
- Joined: 8/21/2009
- Status: offline
- Ribbons : 1
Re:do these temps look fine?
Friday, December 11, 2009 7:57 PM
(permalink)
I wanna know what the heck type of cooling that is!
Air? couldn't be...
Water?
Tec?
Something alien that you wouldn't mind sharing?
X58 Classified - E760 ... i7 920 (D0) @ 4210mhz .... G Skill Trident 6gb @ 1600MHz 7-8-7-20 EVGA GTX 570 Superclocked Edition - TRI SLI My Affiliate Code: ZIQXDYRZ56
|
kiel^cx
SSC Member
- Total Posts : 800
- Reward points : 0
- Joined: 9/24/2009
- Status: offline
- Ribbons : 0
Re:do these temps look fine?
Friday, December 11, 2009 11:30 PM
(permalink)
|
whodaddy
SSC Member
- Total Posts : 654
- Reward points : 0
- Joined: 6/3/2007
- Location: Arizona
- Status: offline
- Ribbons : 3
Re:do these temps look fine?
Saturday, December 12, 2009 1:21 PM
(permalink)
Your TJ max setting should be 100.... not 85, you are not getting correct temps with that setting in core temp.
E-759 CLASSIFIED & I7 920 DO B261
OCZ DDR 3 1600 Gold 6GS / TFC 480 and TFC 360 w KOOLANCE RAD SUPPORT 2x655 PUMPS IN SERIES/ BITS 150Z RES
EK FULL COVERAGE BLOCK / BITS COMPRESSION/ROTARY FITTINGS
EK HF SUPREME PLEXI COPPER CPU BLOCK 1/2X5/8 TUBING
2x GTX 470 SC W EK BLOCKS/WD 150 RADPTOR WD 300 RAPTOR WD 1TB CORSAIR 800D CASE/CORSAIR HX-1000 http://www.heatware.com/eval.php?id=67849
|
kodaCollider
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 12/2/2009
- Location: Portland, OR
- Status: offline
- Ribbons : 1
Re:do these temps look fine?
Saturday, December 12, 2009 5:33 PM
(permalink)
What exactly is the TJ Max thing? When I downloaded RealTemp the default was 90... I figured those temperatures would be accurate. I went into the settings and manually changed it to 100, and my temps jumped, accordingly, about ten degrees.
Uhh...?
|
whodaddy
SSC Member
- Total Posts : 654
- Reward points : 0
- Joined: 6/3/2007
- Location: Arizona
- Status: offline
- Ribbons : 3
Re:do these temps look fine?
Saturday, December 12, 2009 7:58 PM
(permalink)
Thermal Junction Maximum temperature at which your CPU will throttle back to avoid damage.
E-759 CLASSIFIED & I7 920 DO B261
OCZ DDR 3 1600 Gold 6GS / TFC 480 and TFC 360 w KOOLANCE RAD SUPPORT 2x655 PUMPS IN SERIES/ BITS 150Z RES
EK FULL COVERAGE BLOCK / BITS COMPRESSION/ROTARY FITTINGS
EK HF SUPREME PLEXI COPPER CPU BLOCK 1/2X5/8 TUBING
2x GTX 470 SC W EK BLOCKS/WD 150 RADPTOR WD 300 RAPTOR WD 1TB CORSAIR 800D CASE/CORSAIR HX-1000 http://www.heatware.com/eval.php?id=67849
|
kodaCollider
New Member
- Total Posts : 71
- Reward points : 0
- Joined: 12/2/2009
- Location: Portland, OR
- Status: offline
- Ribbons : 1
Re:do these temps look fine?
Saturday, December 12, 2009 8:03 PM
(permalink)
Ah. Well, I guess it's kinda confusing having the temperature reading based off of that... I'm not sure whether mine is actually set to 90 or 100, but either way, that shouldn't affect what my temperature actually is.
I supposed that RealTemp would actually just report the temperature, but I guess it could be off by ten degrees and I'd have no idea.
|
whodaddy
SSC Member
- Total Posts : 654
- Reward points : 0
- Joined: 6/3/2007
- Location: Arizona
- Status: offline
- Ribbons : 3
Re:do these temps look fine?
Saturday, December 12, 2009 8:11 PM
(permalink)
"this is a quote from the real temp techpower up site" Set TJMax Intel does not publicly document TJMax for their desktop processors. They have documented TJ Target for many of their processors but using that number as TJMax may result in reported temperatures that are less accurate. The default TJMax that RealTemp uses is usually a good place to start. Use this feature if you think that TJMax needs to be adjusted. Any value between 70 and 120 is acceptable. end quote" The best vaule that I know of to use for I7 920 processors is 100c. accuarcy is difficult because Intel doesn't publish the TJmax of thier processors. http://www.techpowerup.com/realtemp/docs.php
E-759 CLASSIFIED & I7 920 DO B261
OCZ DDR 3 1600 Gold 6GS / TFC 480 and TFC 360 w KOOLANCE RAD SUPPORT 2x655 PUMPS IN SERIES/ BITS 150Z RES
EK FULL COVERAGE BLOCK / BITS COMPRESSION/ROTARY FITTINGS
EK HF SUPREME PLEXI COPPER CPU BLOCK 1/2X5/8 TUBING
2x GTX 470 SC W EK BLOCKS/WD 150 RADPTOR WD 300 RAPTOR WD 1TB CORSAIR 800D CASE/CORSAIR HX-1000 http://www.heatware.com/eval.php?id=67849
|
goodey
New Member
- Total Posts : 44
- Reward points : 0
- Joined: 9/6/2009
- Location: Stourport-On-Severn, U.K
- Status: offline
- Ribbons : 0
Re:do these temps look fine?
Saturday, December 12, 2009 11:25 PM
(permalink)
u live in the north pole with no heating by anychance?
im on watercooled and i idle at 45c each core....
those are either fake temps or just simply briiliant cooling
i7 4770k OC 4.3GHZ 1.225V WaterCooled Corsair Vengeance Pro 2400Mhz 16Gb Asus Maximus VI Hero Evga 770 SC ACX 4GB 2 SSD 120gb + 1TB SSHD Seasonic 850w Windows 8.1 x64 2nd Rig:EVGA E758 A1 Bios Z2Z < Most stable for my Build Coolermaster Real Power M850 (Peak 1000) i7 920 D0 3.9ghz 1.285v Antec Kúhler H2O 620 Watercooled (4.4ghz @ 6gb Ram) Corsair 12gb DDR3 9-9-9-24-74 1.650v 2x SLi Asus GTX 275's OC Core:720mhz Shader:1500 Memory:1350 60gb OCZ Agility 3 SSD 2x 1TB Seagate storage drives LG 24" LCD HD 1920x1080 G35 7.1 Headset G19 Keyboard Microsoft Habu Mouse Windows 7 Ultimate x64 Edition SP1
|