Re: SR-2 with Xeons X5698 stuck at x12 multiplier
2022/06/23 15:26:52
(permalink)
Hi , u must manually set the multi 12-33 and bus-speed in bios.
set multi x bus 28x150= 4200mhz and set cpu volt to 1,45 if it work, test 30x150=4500mhz
some memory need higher latency when overclocking.
So if it not boot it can also be a mem fail from the high cpu speed.
2x EVGA SR-2 with X5690, 48/96GB RAM.
1x intel Platinum 48core system with 9GPUS, 192GB ram all cpus\gpus watercooled
2x AMDThreadripper builds with 48GB ram,nvme raid.
Intel 12900k,5xNVME raid, 3080,ddr5