ZoranC
FTW Member
- Total Posts : 1099
- Reward points : 0
- Joined: 2011/05/24 17:22:15
- Status: offline
- Ribbons : 16
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/03/24 17:08:28
(permalink)
Today I updated BIOS on my X299 Dark from 1.28 to 1.29. If I am correct BIOS’ hardware monitor reports NXP MCU temperatures are approximately 2C higher after the update than they were before. Has anybody else observed same?
|
Papa_P
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 2022/06/15 11:52:42
- Status: offline
- Ribbons : 0
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/06/20 13:06:08
(permalink)
I installed this update, and updated my GTX 1080 with this software:
I was attempting to install windows 11 and this driver allowed me to disable CSM, I had no video output in BIOS until I installed that driver. I installed it and I was able to disable CSM and still have video output. I booted into windows to make sure everything was ok and it seemed so. So I went back into BIOS to enable Secure Boot and my problems returned, only this time I couldnt bypass BIOS Setup into Windows to flash the BIOS. I am stuck with no video and a POST code of D6, No Console Output Devices are found. Tried another GPU and the same issue is present, D6. So my motherboard just doesn't detect GPUs anymore? Its fans run and it lights up. Any suggestions? Thanks!
|
nekrosoft13
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2006/11/04 10:12:04
- Status: offline
- Ribbons : 0
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/07/21 16:05:15
(permalink)
looks like another update is needed.. 
post edited by nekrosoft13 - 2022/07/21 16:08:29
|
PINKTULIP
FTW Member
- Total Posts : 1158
- Reward points : 0
- Joined: 2007/06/03 16:01:19
- Location: EARTH
- Status: offline
- Ribbons : 7
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/07/28 09:53:29
(permalink)
EVGATech_LeeM
New Updates for X299 Motherboards today. This updates the ME for an Intel security vulnerability:
BIOS 1.29 (E299 Dark) / 1.29 (E297 FTW K) / 1.22 (E296 Micro ATX 2) /1.30 (E295 Micro) Updates
- Update ME firmware to 11.12.90.1962v10 for Intel security vulnerability.
Windows Installation
- Download the correct .zip file below for your motherboard:
151-SX-E299-KR - EVGA X299 Dark - v1.29
142-SX-E297-KR - EVGA X299 FTW K - v1.29
121-SX-E296-KR - EVGA X299 Micro ATX 2 - v1.22
131-SX-E295-KR - EVGA X299 Micro ATX - v1.30
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and double-click update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
BIOS Installation
- Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash.
Please let me know if anyone runs into problems with this update. Thanks!
I am requesting new BIOS 1.30 because I believe when Above 4G Decoding Enable in the Bios 1.28 and 1.29 it cause USB Device not detected time to time!!!!!!!!!
MOBO :EVGA X299 DARK 151-SX-E299-KR BIOS :1.29 CPU : Intel Core i9-10900X Skylake-X 10-Core 3.7 GHz LCR :Corsair Hydro Series H80i V2 GPU :SAPPHIRE NITRO+ RX 6900 XT SE MEMORY: CORSAIR Dominator Platinum SE Torque 32GB (4 x 8GB) CMD32GX4M4C3200C14T SSD 01: SAMSUNG 970 PRO M.2 1TB NVMe SSD 02: SAMSUNG 860 PRO 256GBX2 Raid 0 PSU : Seosonic Prime Titanium SSR-1000TR 1000 Watts CASE :Thermaltake (Armor+) VH6000SWA SC :Creative Sound Blaster AE-9 5.1 Channels Monitor Acer XR382CQK IPS 3840x1600 @ 75HZ BD [/
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24581
- Reward points : 0
- Joined: 2013/11/13 02:48:57
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/07/28 15:07:06
(permalink)
PINKTULIP
I am requesting new BIOS 1.30 because I believe when Above 4G Decoding Enable in the Bios 1.28 and 1.29 it cause USB Device not detected time to time!!!!!!!!!
Lee already replied in your thread.
|
ocbones
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2020/04/11 22:19:30
- Status: offline
- Ribbons : 0
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/11/21 16:52:14
(permalink)
I'm having an issue with virtualization not working after the latest bios 1.29 update on x299 Dark can anyone confirm that it does work? its enabled in bios but shows disabled under windows, any help would be great! cant run any vm software. Customer service also does not pick up phone calls on Monday 11-21-22 maybe early thanksgiving vacay?
post edited by ocbones - 2022/11/21 17:46:07
|
ZoranC
FTW Member
- Total Posts : 1099
- Reward points : 0
- Joined: 2011/05/24 17:22:15
- Status: offline
- Ribbons : 16
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/11/21 16:55:14
(permalink)
ocbonesI'm having an issue with virtualization not working after the latest bios 1.29 update can anyone confirm that it does work? its enabled in bios but shows disabled under windows, any help would be great! cant run any vm software. Customer service also does not pick up phone calls on Monday 11-21-22 maybe early thanksgiving vacay? I'm running VMWare Workstation Pro V16 on X299 Dark BIOS 1.29 and Win10 host without any issues.
|
EVGA_Lee
Moderator
- Total Posts : 4247
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/11/21 16:57:53
(permalink)
ocbones
I'm having an issue with virtualization not working after the latest bios 1.29 update can anyone confirm that it does work? its enabled in bios but shows disabled under windows,
any help would be great! cant run any vm software. Customer service also does not pick up phone calls on Monday 11-21-22 maybe early thanksgiving vacay?
Not sure what issues you're having with the phone system. We did restart our phone system a little earlier today, but support is still in the office and answering calls for another hour today.
|
xuqi99
New Member
- Total Posts : 41
- Reward points : 0
- Joined: 2015/04/30 07:06:29
- Location: Australia
- Status: offline
- Ribbons : 3
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/11/27 00:50:44
(permalink)
|
Xyletic
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2021/08/15 01:21:58
- Status: offline
- Ribbons : 0
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/12/07 04:24:27
(permalink)
hi,
this might be a weird place to ask but is it possible to have a bios that allows disabling of HT on only specific cores?
|
jmacy38
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2010/06/10 14:39:58
- Status: offline
- Ribbons : 0
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/12/20 18:06:03
(permalink)
Thanks in advance. I bought a x299 Dark and a 9820x used awhile back and the Bios had already been updated for the 9820x. Everything works great. Came across a 10980XE recently, and bought a new old-stock x299 to put it in, but it's unlikely that it shipped with the Bios updated, so I came here to order a Bios chip, but apparently, there are none left. I do not have a 7th Gen X cpu lying around. My question is, can I use the Bios chip off of my 1st x299 Dark to update my 2nd? I intend to keep both of them in service, but I can temporarily take my 1st rig off-line to accomplish this. If it's possible, how can I get instructions on how to do it? I'm not a noob, but I have very little experience with removable Bios chips.
|
ZoranC
FTW Member
- Total Posts : 1099
- Reward points : 0
- Joined: 2011/05/24 17:22:15
- Status: offline
- Ribbons : 16
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/12/23 17:32:07
(permalink)
jmacy38
My question is, can I use the Bios chip off of my 1st x299 Dark to update my 2nd?
No, I tried it before and it didn't work.
|
ringerthrawn
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2010/01/29 20:49:52
- Location: Visalia, CA
- Status: offline
- Ribbons : 0
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/12/26 11:26:32
(permalink)
I just updated the x299 to the latest BIOS but now it won’t boot past the new EVGA bios screen where you have 4 options (enter setup, gamer mode, default mode, EVGA of robot). I setup all my options, so how do you get back to my damn Windows 10???
post edited by ringerthrawn - 2022/12/26 11:48:12
|
ringerthrawn
Superclocked Member
- Total Posts : 182
- Reward points : 0
- Joined: 2010/01/29 20:49:52
- Location: Visalia, CA
- Status: offline
- Ribbons : 0
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2022/12/26 11:48:37
(permalink)
I figured it out. My boot priority got changed with the profile reset!
|
hackercdc
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2011/09/06 08:50:27
- Status: offline
- Ribbons : 0
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2023/01/05 11:00:39
(permalink)
I bought a samsung m.2 nvme ssd 980 PRO and my FTW K recognizes it but out of nowhere the partition doesn't appear anymore and it shows size 0 Mb, I took it to the technician and as he has another card of a different model, the m.2 works normally with it. The technician formatted and installed windows, but when I put it in my board it only worked for a few moments and the same thing happened. I already updated bios to 1.29 and followed all steps in bios configuration. Is it incompatibility of the m.2 because it is pcie 4.0 and the ftw k is pcie 3.0?
|
ZoranC
FTW Member
- Total Posts : 1099
- Reward points : 0
- Joined: 2011/05/24 17:22:15
- Status: offline
- Ribbons : 16
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2023/01/05 11:39:05
(permalink)
hackercdc
I bought a samsung m.2 nvme ssd 980 PRO and my FTW K recognizes it but out of nowhere the partition doesn't appear anymore and it shows size 0 Mb, I took it to the technician and as he has another card of a different model, the m.2 works normally with it. The technician formatted and installed windows, but when I put it in my board it only worked for a few moments and the same thing happened. I already updated bios to 1.29 and followed all steps in bios configuration. Is it incompatibility of the m.2 because it is pcie 4.0 and the ftw k is pcie 3.0?
First, this is a wrong thread for your question, you should've created your own thread. Second, I strongly doubt this is because your drive is PCIE 4.0 while slot is 3.0. PCIE standards are backward compatible and your number of lanes is same, so something else is likely going on.
|
oppock
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2023/04/06 07:06:18
- Status: offline
- Ribbons : 0
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2023/04/06 07:27:07
(permalink)
Hey guys. my motherboard EVGA X299 FTWK The lower left corner is burned. LOOK!!
|
nekrosoft13
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 2006/11/04 10:12:04
- Status: offline
- Ribbons : 0
Re: BIOS Updates for X299 Dark (1.29) / FTW K (1.29) / Micro ATX 2 (1.22) / Micro ATX (1.3
2023/11/02 08:39:24
(permalink)
did EVGA_Lee leave the company too?
|