Adds some Vcore support for XOC on Z590 DARK.

• EVGA Eleet X1 v1.0.8.0

Release Notes:

• Adds Vcore Override Support for Z590 DARK
• Allows Vcore to be set higher than 1.72V on the Z590 DARK

 
As always, please leave your feedback and let us know if you run into any issues.

Eleet x1 v1.0.8.0 also auto closed with the newest Dark bios 1.06 with the same errors as I linked in previous post.
So I was messing around with the firmwareupdate.exe from different versions of eleet.
But v1.0.80 will work for me if I remove Z590_AP_R112.bin in folder FirmwareHid, and replace it with the Z590_AP_R111.bin from eleet v1.0.6.0.  Nothing else was changed in the program folder besides that .bin file.

any chance this utility could be released with a version that runs on windows xp? (i know)

I'm getting an error when I try to open this now that says "Ring0 is not open." It pops up as soon as I try to launch the application, then if I X it out or click "OK" it closes the app. I can try to reinstall it, but I was wondering if that's any sort of cause for concern?

I'll pass this along to our SW team to see if they can reproduce the issue/fix.
 
Thanks.

Hi, was wondering if there is anything special I need to do to get Eleet X1 working properly in Windows 7?  It loads up but the whole window is blank, there's literally nothing in there, I can the default, apply, save buttons.  But everything else is just gone.  Anyone seen anything like this?

v1.0.13 crashes every time I attempt to save a profile.

Can't tell from the exception log if this is an EX1 issue, or a Windoze issue.

Message: The given key was not present in the dictionary.
StackTrace:    at System.ThrowHelper.ThrowKeyNotFoundException()
   at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
   at Z590Lib.Hardware.Memory.CometMemoryCtrl.Save(List`1& profile)
   at Z590Lib.Models.ELeetXProfile.SaveProfile(Int32 index)
   at Z590Lib.ViewModels.MainViewModel.Save()
   at Prism.Commands.CompositeCommand.Execute(Object parameter)
   at MS.Internal.Commands.CommandHelpers.CriticalExecuteCommandSource(ICommandSource commandSource, Boolean userInitiated)
   at System.Windows.Controls.Primitives.ButtonBase.OnClick()
   at System.Windows.Controls.Button.OnClick()
   at System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
   at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
   at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   at System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
   at System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
   at System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
   at System.Windows.RoutedEventHandlerInfo.InvokeHandler(Object target, RoutedEventArgs routedEventArgs)
   at System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
   at System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
   at System.Windows.UIElement.RaiseTrustedEvent(RoutedEventArgs args)
   at System.Windows.Input.InputManager.ProcessStagingArea()
   at System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
   at System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
   at System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
   at System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, WindowMessage msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   at System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
   at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
   at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)

EVGATech_LeeM
Have you tried deleting the profile folder in AppData>Local>EVGA,Co.Ltd ?

No. Didn't even think of it. 

I'm going to give that a shot.

Did you install PX1 before ELEET X1?  It can cause some odd issues to happen if they're installed back to back.  If so, I'd suggest to uninstall both, clear the profile folders for both, then reboot, reinstall one, reboot and reinstall the other.  When you reinstall the second program, make sure the other program is not running.
 
Edit:  added additional details.

Does anyone know why ELEET is returning 0 values?
 
Z590FTW on v1.09 and tried reinstalling and even downgrading ELEET to 1.0.12 and 1.0.11....I haven't tried downgrading bios yet.
 
 
 

B0baganoosh

grechie
Does anyone know why ELEET is returning 0 values?
 
Z590FTW on v1.09 and tried reinstalling and even downgrading ELEET to 1.0.12 and 1.0.11....I haven't tried downgrading bios yet.

 
Shot in the dark, but do you have Precision X1 open already? I know they can conflict with each other sometimes so it's helpful to close one before opening the other. Also, Does it need to be run as admin? Also, you may want to clear the profile folder per Lee above:
"Did you install PX1 before ELEET X1?  It can cause some odd issues to happen if they're installed back to back.  If so, I'd suggest to uninstall both, clear the profile folders for both, then reboot, reinstall one, reboot reinstall the other."

I suppose to add to that, when you reinstall the second program, make sure the other one isn't running.
 
Also, ibb.co is blocked for us internally, so you'll need another host if you want me to review the images.

Is there any way to add fan control to X1?
 
The z690 and z790 got control for fans in the latest update :  https://forums.evga.com/ELEET-X1-v10150-m3590832.aspx
 
Can we have the same for the z590? I tried every piece of software to control the fans with a simple fan curve (Fan Control, Speedfan, Argus, etc) and none detect the fans connected to the motherboard.