tigerjones8888
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 7/6/2016
- Status: offline
- Ribbons : 0
I just opened my new 3090 ftw and peeled the plastic wrap off. I noticed this area on the rgb logo that has what it looks like to be more of the plastic wrap but I'm not sure if it's that or there is some coating on that area that isn't supposed to be removed. This is how it looked right after I peeled the plastic wrap off. Suggestions? http://imgur.com/gallery/XBP9mf1  edit Cool GTX added photo
post edited by Cool GTX - Friday, October 23, 2020 6:32 PM
|
arestavo
CLASSIFIED ULTRA Member
- Total Posts : 6806
- Reward points : 0
- Joined: 2/6/2008
- Location: Through the Scary Door
- Status: offline
- Ribbons : 77
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 6:00 AM
(permalink)
Three more posts (10 total) before you can post links. Break up the link like: website .com/image to get it to post as a workaround.
|
tigerjones8888
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 7/6/2016
- Status: offline
- Ribbons : 0
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 8:48 AM
(permalink)
I was finally able to link the pics.
|
the_Scarlet_one
formerly Scarlet-tech
- Total Posts : 24080
- Reward points : 0
- Joined: 11/13/2013
- Location: East Coast
- Status: offline
- Ribbons : 79
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 9:41 AM
(permalink)
Did you remove the clear cover that is usually over that badge? I have not been able to purchase a card yet, so I have not been able to look at them and see if there is an anti scratch plastic over the badge
|
Viper97
CLASSIFIED ULTRA Member
- Total Posts : 5208
- Reward points : 0
- Joined: 9/7/2007
- Location: Chillin'
- Status: offline
- Ribbons : 11
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 10:32 AM
(permalink)
Looks to me that some of the protective plastic got caught between the shroud and heatsink.
|
20219348762341
FTW Member
- Total Posts : 1289
- Reward points : 0
- Joined: 12/22/2013
- Status: offline
- Ribbons : 2
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 10:52 AM
(permalink)
Its surprising you can't see exactly what that is, you have the card right there, but at closer look, it does seem like stack wrap between heat sink and logo.
post edited by AWK16 - Friday, October 23, 2020 11:09 AM
|
tigerjones8888
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 7/6/2016
- Status: offline
- Ribbons : 0
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 3:58 PM
(permalink)
Any ideas on how to remove it? It's definitely stuck under the shroud.
|
FCooley
New Member
- Total Posts : 72
- Reward points : 0
- Joined: 1/1/2004
- Status: offline
- Ribbons : 1
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 4:03 PM
(permalink)
I noticed the same thing on my EVGA RTX 3090 FTW3 Ultra I just installed yesterday. I used needle nose pliers to pull that plastic off that was a bit stuck in the shroud. Although I don't think it would have hurt to leave it.
CPU: Intel i9-12900K Mainboard: EVGA Z690 Classified GPU: EVGA RTX 3090 FTW3 Ultra RAM: Corsair Vengeance DDR5 - 32GB PSU: EVGA SuperNOVA 1600 T2 OS: Windows 11
|
tigerjones8888
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 7/6/2016
- Status: offline
- Ribbons : 0
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 4:20 PM
(permalink)
Yeah I might have to end up leaving a little bit. I've been trying to use my finger nails but I can't seem to get the last little bit off. Might have to take off the shroud to get that last little bit off...
|
antarious
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 6/4/2007
- Status: offline
- Ribbons : 0
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 5:00 PM
(permalink)
My 3080 FTW 3 Ultra had some plastic wrap stuck in that manner. Personally I just kept working at it with what fingernails I do have. I tend to keep them short but anyway... it did eventually just come off.
|
mobhill
Superclocked Member
- Total Posts : 189
- Reward points : 0
- Joined: 12/18/2009
- Status: offline
- Ribbons : 0
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 5:02 PM
(permalink)
Must be wrapped when they assemble?
|
rain2_usa
SSC Member
- Total Posts : 523
- Reward points : 0
- Joined: 9/16/2020
- Status: offline
- Ribbons : 1
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 5:06 PM
(permalink)
Maybe I missed something here. Why don't you just remove the shroud and get it off? It's quite easy and doesn't affect anything on the actual card. If you want a video on how it's done, Steve at Gamers Nexus shows the teardown. https://youtu.be/mX1spw5_IX0?t=1427
Core i7 6700k Gigabyte Z170XP-SLI 2x8GB Team T-Force Vulcan Z 3200Mhz EVGA 2070 Super XC Ultra Corsair AIO? with 3D Printed spacer Mushkin 240GB SSD 1TB NVMe 1TB Seagate SSHD LG Black BD-Drive UH12NS30 Seasonic Focus GM-750 80+ Gold Silverstone Grandia GD09B HTPC Case
|
tigerjones8888
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 7/6/2016
- Status: offline
- Ribbons : 0
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 6:02 PM
(permalink)
Obviously I could just take the shroud off. I was just trying to not have to do that. Already taken me too long putting together this new build cause all the rgb cable management lol. I just wanted to open the new card and not have to deal with extra stuff like plastic wrap. I'm just thankful for the que system and having this card so I shouldn't complain. EVGA is the best! Except there plastic wrapper. That could use some tweaking😂
|
rain2_usa
SSC Member
- Total Posts : 523
- Reward points : 0
- Joined: 9/16/2020
- Status: offline
- Ribbons : 1
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 6:53 PM
(permalink)
Understandable. Have you tried using a toothpick? Least likely thing to scratch the surface and might be able to get into the tight spot to pull the shrink wrap off.
Core i7 6700k Gigabyte Z170XP-SLI 2x8GB Team T-Force Vulcan Z 3200Mhz EVGA 2070 Super XC Ultra Corsair AIO? with 3D Printed spacer Mushkin 240GB SSD 1TB NVMe 1TB Seagate SSHD LG Black BD-Drive UH12NS30 Seasonic Focus GM-750 80+ Gold Silverstone Grandia GD09B HTPC Case
|
tigerjones8888
New Member
- Total Posts : 21
- Reward points : 0
- Joined: 7/6/2016
- Status: offline
- Ribbons : 0
Re: 3090 ftw plastic peeling
Friday, October 23, 2020 10:12 PM
(permalink)
I will try that. I got most of it off with my fingernail. I put it in the pc now until I order some custom cables and have to take it back out and then I'll mess with it more. I gotta test 4k 120hz hdr 444!! Hopefully my cable works...
|