Mylez_
New Member
- Total Posts : 72
- Reward points : 0
- Joined: 2018/09/22 16:07:09
- Status: offline
- Ribbons : 0
Will there be a 120mm Radiator 3080?
My janky duct fan has more CFM than your entire case! ;D I7-8700z370 prime A16GB 3200mhz cl163080 ftw3 ultra The Tower 900 with 6" duct fan mod CFM 500 exhaust.Samsung 970 pro 250GB 500GBand a bunch of monitors tldr 1440p 165hz
|
bg8780
CLASSIFIED Member
- Total Posts : 2540
- Reward points : 0
- Joined: 2008/02/19 14:21:34
- Status: offline
- Ribbons : 4
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 12:38:58
(permalink)
I hope not. 120mm was a bit skimp on a 250w card. The 3080 is 320w TDP.
Maybe they can offer a 120mm and 240mm option.
|
Mylez_
New Member
- Total Posts : 72
- Reward points : 0
- Joined: 2018/09/22 16:07:09
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 12:43:09
(permalink)
My 2070 super never went a touch over 60c when gaming but I hope they offer it, I have the tower 900 and I had planned on putting a 3080 Hybrid right in the top fan spot in the case. I made the mistake of going for an aluminum EK open loop kit when I built my pc so I cant get a hydro card unless I wanna build a whole new loop which I'm not opposed to but I don't want to have to spend another $200 in parts to make a card work.
My janky duct fan has more CFM than your entire case! ;D I7-8700z370 prime A16GB 3200mhz cl163080 ftw3 ultra The Tower 900 with 6" duct fan mod CFM 500 exhaust.Samsung 970 pro 250GB 500GBand a bunch of monitors tldr 1440p 165hz
|
pocketdrummer
New Member
- Total Posts : 16
- Reward points : 0
- Joined: 2010/10/19 22:42:08
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:00:38
(permalink)
I wish they'd just release a bare card without a cooler and partner with EKWB to release a custom waterblock for it. There's no sense spending money on a cooler if you're just going to rip it off and put another block on it anyway.
As far as the hybrid goes, it would be nice if they offered it in 240mm. I can't think of many cases nowadays that you'd water-cool in that don't have at least 2 x 120mm fans side-by-side.
|
Psathionoukous
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/08/27 02:58:37
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:03:23
(permalink)
Definitely would get if it was 240mm, I really hope they offer it!
|
richpergrem
New Member
- Total Posts : 18
- Reward points : 0
- Joined: 2020/02/10 18:02:09
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:08:25
(permalink)
I have a NZXT 710i. For a second 240, looks like I will have to put it in the front as an intake. The top spot has a 240 for the CPU. Kinda sucks I will lose one intake fan, only having 2 after instead of 3 :/
|
Desaccorde
Superclocked Member
- Total Posts : 104
- Reward points : 0
- Joined: 2014/11/29 10:42:43
- Status: offline
- Ribbons : 1
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:24:30
(permalink)
Hybrid is 240mm. whereas Kingpin is 360mm. Gen. 6 Asetek.
|
micfogas
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2020/02/18 16:06:52
- Location: Southern California
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:25:30
(permalink)
Would actually like to see a 140mm hybrid. Still only one slot, but gives that little extra. As for offering the non radiator version, are you aware of the hydro copper version? Comes with the block installed, you add it to your custom loop. Personally, I find the hybrid cooler aio works just fine for mine. But I had to mount the rad on the rear exhaust, due to my 360mm rad taking the entire top. I'm using a cm h500m case. I also had to pull out my vertical mount bc the only option was for the tubes to come out the top, it looked awkward to say the least. Would be nice if the hybrid kit allowed for tubes exiting out the front of the shroud too. I added my hybrid kit on after, didn't buy the hybrid card.
|
Psathionoukous
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/08/27 02:58:37
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:29:04
(permalink)
Desaccorde
Hybrid is 240mm. whereas Kingpin is 360mm. Gen. 6 Asetek.
Is this speculation or did you find it somewhere?
|
afausty
Superclocked Member
- Total Posts : 102
- Reward points : 0
- Joined: 2009/07/27 13:40:44
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:30:30
(permalink)
EVGA_JacobF
Desaccorde
Do we expect Hybrid, Hydro and all editions to come out at the same time? And is there any info on Hybrid's AIO size? Thanks.
HYBRID's are now 240mm. KPE is 360mm.
|
Desaccorde
Superclocked Member
- Total Posts : 104
- Reward points : 0
- Joined: 2014/11/29 10:42:43
- Status: offline
- Ribbons : 1
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:30:50
(permalink)
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 16946
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:35:35
(permalink)
☼ Best Answerby Cool GTX 2020/09/09 12:01:18
240mm for HYBRID, 360mm for KPE.
|
Beasthunt
iCX Member
- Total Posts : 307
- Reward points : 0
- Joined: 2015/05/25 00:49:35
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:47:38
(permalink)
I CAN'T wait for the 3080 hybrid. Time to put 1080 ti hybrid in a new case for the kiddos. Old girl has a ton of life in her.
|
Psathionoukous
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2020/08/27 02:58:37
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 13:50:08
(permalink)
EVGA_JacobF
240mm for HYBRID, 360mm for KPE.
Dreams do come true
|
Mylez_
New Member
- Total Posts : 72
- Reward points : 0
- Joined: 2018/09/22 16:07:09
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 14:20:19
(permalink)
Could you tell me how long the tubes are coming off the radiator to the card shroud? Or is it the same 400mm tube length as last gen?
My janky duct fan has more CFM than your entire case! ;D I7-8700z370 prime A16GB 3200mhz cl163080 ftw3 ultra The Tower 900 with 6" duct fan mod CFM 500 exhaust.Samsung 970 pro 250GB 500GBand a bunch of monitors tldr 1440p 165hz
|
EVGA_JacobF
EVGA Alumni
- Total Posts : 16946
- Reward points : 0
- Joined: 2006/01/17 12:10:20
- Location: Brea, CA
- Status: offline
- Ribbons : 26
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 14:36:15
(permalink)
☄ Helpfulby Cool GTX 2020/09/11 12:21:13
Same tube length as last gen.
|
Mylez_
New Member
- Total Posts : 72
- Reward points : 0
- Joined: 2018/09/22 16:07:09
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 14:37:46
(permalink)
Thanks, it really helps me plan out the redesign of my case.
My janky duct fan has more CFM than your entire case! ;D I7-8700z370 prime A16GB 3200mhz cl163080 ftw3 ultra The Tower 900 with 6" duct fan mod CFM 500 exhaust.Samsung 970 pro 250GB 500GBand a bunch of monitors tldr 1440p 165hz
|
Nereus
Captain Goodvibes
- Total Posts : 18926
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/01 14:53:23
(permalink)
Go order your riser cables asap, I think they may be in demand shortly..
|
kim666
New Member
- Total Posts : 56
- Reward points : 0
- Joined: 2015/07/12 02:58:46
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/09 03:38:50
(permalink)
EVGA_JacobF
240mm for HYBRID, 360mm for KPE.
why not thick 120mm for 3080? 240mm i am out of mount space 
|
Nereus
Captain Goodvibes
- Total Posts : 18926
- Reward points : 0
- Joined: 2009/04/09 20:05:53
- Location: Brooklyn, NYC.
- Status: offline
- Ribbons : 58
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/09 04:46:20
(permalink)
120mm isn't enough for these cards - TDP significantly higher than previous series. Air cooling will suffice otherwise.
|
Xaelias
Superclocked Member
- Total Posts : 193
- Reward points : 0
- Joined: 2015/12/03 19:50:08
- Status: offline
- Ribbons : 0
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/09 06:34:07
(permalink)
pocketdrummer
I wish they'd just release a bare card without a cooler and partner with EKWB to release a custom waterblock for it. There's no sense spending money on a cooler if you're just going to rip it off and put another block on it anyway.
As far as the hybrid goes, it would be nice if they offered it in 240mm. I can't think of many cases nowadays that you'd water-cool in that don't have at least 2 x 120mm fans side-by-side.
The only sense is if you plan on giving the card away to friend/family or sell it back. It's much easier to sell with an air cooler than just a waterblock. Which said person might not want to buy from you. Also. They sell a watercooled version. Why would they partner with EK when they have their own block?
|
yaggaz
FTW Member
- Total Posts : 1509
- Reward points : 0
- Joined: 2007/04/12 19:10:22
- Status: offline
- Ribbons : 1
Re: What size are the Radiators for the Hybrid 3080 cards?
2020/09/09 14:10:15
(permalink)
EVGA_JacobF
240mm for HYBRID, 360mm for KPE.
Thanks for taking the time to post info for us 
|| CPU: Intel 10700k || GPU: evga 3080 XC3 Ultra Hybrid || MB: Gigabyte z490 UD AC || RAM: 2 x 16GB 3000mhz DDR4 SDRAM || Samsung EVO 970 Plus 2TB || Dell S2417DG Monitor || Soundblaster AE-7 || Phanteks p400a Case || be Quiet! Dark Rock Slim CPU Cooler || Corsair AX1600i PSU || 9 Fans total in system ||
|