EVGA
Prev Thread
Next Thread

Disable 0 RPM on idle on 2080 TI FTW3 without X1

Author
Post
Essentials Only Full Version
maxhitk
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 4/23/2019
  • Status: offline
  • Ribbons : 0
Wednesday, May 01, 2019 8:53 PM (permalink)
Hi,
as said here: forums.evga.com/EVGA-Precision-X1-Causing-Stuttering-m2932159-p2.aspx#2950008
I am having a lot of trouble with X1, and its basically unuseable for me. I especially need to make use of the custom fan curve, but cannot. Now even though I am not a fan (no pun intended) of the BIOS fan curve, I could live with it for now, If I could somehow have the Fans not go to 0 RPM on idle. Because this inevitably leads to the fans continuously turning on and off all the time during idle. This is driving me nuts, I would rather have them sitting at 30% all the time and keep the GPU at 40°C idle instead of revving up every few seconds when it hits 50-something °C.
 
I read the OC Bios is supposed to disable zero RPM mode, but it does not for me. The fans turn off on both BIOS versions. Is there anything I can do?
#1

2 Replies Related Threads
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31353
    • Reward points : 0
    • Joined: 12/12/2010
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: Disable 0 RPM on idle on 2080 TI FTW3 without X1 Thursday, May 02, 2019 6:14 PM (permalink)
    Power off the PC, pull the plug to the wall, wait couple min for capacitors to discharge - restart your PC
     
    New BIOS should function on your card
     
    Another option:  Set a fixed RPM (say 60%) and exit X1 - just watch your temps
     
    Adjust hysteresis to help stop fan speed hunting - the stock setting of Zero allows it to change quickly Up/Down RPM, set it to 5

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #2
    AHowes
    CLASSIFIED ULTRA Member
    • Total Posts : 6502
    • Reward points : 0
    • Joined: 9/20/2005
    • Location: Macomb MI
    • Status: offline
    • Ribbons : 27
    Re: Disable 0 RPM on idle on 2080 TI FTW3 without X1 Thursday, May 02, 2019 6:30 PM (permalink)
    Yeah once you change the bios you'll need to also uninstall px1 and reboot and reinstall px1 for it to notice the difference.. that's for px1 though.

    Yes do the above what cool gtx mentioned and it should fix it for ya.

    Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop.
    Asus Z390 ROG Extreme XI MB
    G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 
    EVGA 2080ti K|NGP|N w/ Hydro Copper block.  
    34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor
    Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
    #3
    Home » All Forums » [Graphics Cards] » EVGA GeForce RTX 20 & GTX 16 Series » Disable 0 RPM on idle on 2080 TI FTW3 without X1
    Jump to: