EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 11/4/2016
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Release: 6/28/2022 - This release updates PX1 for PowerLink and LED support for 3090 Ti cards. Note - To reduce potential MCU/BIOS flashing issues, please disable "Fast Boot" in your motherboard BIOS before changing cards or flashing to a different BIOS. Just a PSA.... - Adds support for PowerLink LED with EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3
- Adds support for EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3 HYBRID Fan LED
https://www.evga.com/precisionx1/Please let us know if you run into any issues.
|
Mzfhartge
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 5/13/2022
- Status: offline
- Ribbons : 3
Re: EVGA Precision X1 1.3.5.0
Wednesday, June 29, 2022 1:50 AM
(permalink)
Just updated Precision to the latest version and installed the new led software. After installation was done, it updated the firmware of the card. When firmware was updating, the GPU made a loud screeching noise and two little red light were on while side led panel was off. The lights after that were not the same as before since when I had it on breathing. Now it shows flickering instead. Rainbow effect is fine just not the others. I rebooted the pc to see if it would fix it but instead I got a blue screen. Went into bios and reset it. now Pc boots but lights flickers white. Update: The lights are working fine now, I had to change the led number under led which belongs to Powerlink 41s and everything went normal. Now the question is it normal to make a high pitch sound when it updated the firmware and why I got a BSOD? GPU: 3090TI FTW3 ULTRA Driver: 516.59 Bios: 94.02.A0.00.ED Firmware: 50.01.08
post edited by Mzfhartge - Wednesday, June 29, 2022 2:17 AM
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 12/12/2010
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: EVGA Precision X1 1.3.5.0
Wednesday, June 29, 2022 2:28 AM
(permalink)
cool, I'll have to test this
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
zippytek
FTW Member
- Total Posts : 1185
- Reward points : 0
- Joined: 10/7/2020
- Status: offline
- Ribbons : 9
Re: EVGA Precision X1 1.3.5.0
Wednesday, June 29, 2022 12:33 AM
(permalink)
EVGATech_LeeM
Release: 6/28/2022 - This release updates PX1 for PowerLink and LED support for 3090 Ti cards.
Note - To reduce potential MCU/BIOS flashing issues, please disable "Fast Boot" in your motherboard BIOS before changing cards or flashing to a different BIOS. Just a PSA....
- Adds support for PowerLink LED with EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3
- Adds support for EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3 HYBRID Fan LED
https://www.evga.com/precisionx1/
Please let us know if you run into any issues.
does this imply y'all *will* be releasing a powerlink that supports 2x 12VHPWR connectors on the 3090 Ti KPE? thank you
|
EVGA_Lee
Moderator
- Total Posts : 4243
- Reward points : 0
- Joined: 11/4/2016
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: EVGA Precision X1 1.3.5.0
Wednesday, June 29, 2022 5:05 PM
(permalink)
zippytek
EVGATech_LeeM
Release: 6/28/2022 - This release updates PX1 for PowerLink and LED support for 3090 Ti cards.
Note - To reduce potential MCU/BIOS flashing issues, please disable "Fast Boot" in your motherboard BIOS before changing cards or flashing to a different BIOS. Just a PSA....
- Adds support for PowerLink LED with EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3
- Adds support for EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3 HYBRID Fan LED
https://www.evga.com/precisionx1/
Please let us know if you run into any issues.
does this imply y'all *will* be releasing a powerlink that supports 2x 12VHPWR connectors on the 3090 Ti KPE? thank you
That's a great question. 
|
kingpinamar
New Member
- Total Posts : 19
- Reward points : 0
- Joined: 7/1/2022
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.3.5.0
Friday, July 01, 2022 11:47 PM
(permalink)
|
getalife
New Member
- Total Posts : 63
- Reward points : 0
- Joined: 11/26/2015
- Location: Quebec Canada
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.3.5.0
Saturday, July 02, 2022 5:59 PM
(permalink)
Latest version of Precision X1 seem to have killed my EVGA 2070 RTX Will try to do advance troubleshooting to confirm. Little update my card is ok and running fine. Also, on my main rig, equip with a 3090, the Precision X1 is totally unstable, it close without notice and no reason. This is still accurate moved to the new 1.36 version Here's a replication of the log -System -Provider [ Name]Application Error -EventID1000 [ Qualifiers]0 Version0 Level2 Task100 Opcode0 Keywords0x80000000000000 -TimeCreated [ SystemTime]2022-07-02T17:25:07.1367664Z EventRecordID15887 Correlation -Execution [ ProcessID]16300 [ ThreadID]0 ChannelApplication ComputerTTBOY76 Security-EventData PrecisionX_x64.exe 1.3.5.0 62bab7d9 clr.dll 4.8.4515.0 624ce98e c0000005 0000000000002c2d 1d94 01d88e35a7acbabf C:\Program Files\EVGA\Precision X1\PrecisionX_x64.exe C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll c921fe44-6d15-4803-b12c-5e37b9d5ab67 Also a Net framework ERROR V.403.30319 with error code 80131506 No error on the new version, but Core clock is going crazy on my GPU #1 
post edited by getalife - Friday, July 08, 2022 6:25 PM
Simply enthousiasmic about computer since 1992
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8899
- Reward points : 0
- Joined: 10/14/2003
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: EVGA Precision X1 1.3.5.0
Saturday, July 02, 2022 6:07 PM
(permalink)
zippytek
EVGATech_LeeM
Release: 6/28/2022 - This release updates PX1 for PowerLink and LED support for 3090 Ti cards.
Note - To reduce potential MCU/BIOS flashing issues, please disable "Fast Boot" in your motherboard BIOS before changing cards or flashing to a different BIOS. Just a PSA....
- Adds support for PowerLink LED with EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3
- Adds support for EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3 HYBRID Fan LED
https://www.evga.com/precisionx1/
Please let us know if you run into any issues.
does this imply y'all *will* be releasing a powerlink that supports 2x 12VHPWR connectors on the 3090 Ti KPE? thank you
Good catch but it seems likely that wasn't a mistake.
|
BlackBeard
New Member
- Total Posts : 9
- Reward points : 0
- Joined: 8/31/2009
- Status: offline
- Ribbons : 0
Re: EVGA Precision X1 1.3.5.0
Sunday, July 03, 2022 7:37 PM
(permalink)
I gave up on v.1.3.4.0 so I downloaded/installed v1.3.5.0 today, still certain Issues....All Fans Ramp up or down when set to Auto as defined by preset or by custom(user), where the Issue comes in is the in game FPS 22 to 30 which is abysmal compared to the 120+ in v1.3.3.0(which I reverted to again as it works). Something I also noticed which would factor the low FPS is in v1.3.5.0 the Power was 24 and GPU Temp is 63 which they can be adjusted with the slider bars but did not do so automatically, I hope this helps narrow down a stable P X1 build.
|