danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
  * Deleted prior posts for brevity - Gentlemen - here is the completed result! On the right was prior to me getting the lighting arranged around the side panel... on the left is the finished result :P I have one more cable left to run! I'm sure those with OCD will find it ( it's the panel LED cable.)
post edited by danperry13 - Tuesday, March 19, 2019 4:35 AM
|
Delirious
EVGA Forum Moderator
- Total Posts : 11199
- Reward points : 0
- Joined: 11/15/2007
- Location: at my computer
- Status: offline
- Ribbons : 61
Re: DG-77 BLACK BUILD
Tuesday, March 12, 2019 10:35 PM
(permalink)
"Be quick to listen, slow to speak and slow to anger" Affiliate Code XZUMV9TJW5 Associate Code: 7PM43CU71IB2IAP education may be expensive but wait until you get the bill for ignorance A wise man once said that we can't make anyone feel or do anything. We can throw things into the wind, but it's up to each person to decide how they want to react, where they want to stand when things fall.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 12/12/2010
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: DG-77 BLACK BUILD
Tuesday, March 12, 2019 10:47 PM
(permalink)
Nice Rig  I'll be looking for those updates
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Tuesday, March 12, 2019 10:52 PM
(permalink)
I'll also do a full review on this case after... I know it's a mid sized, but :P I have a few critical things to say about how they designed this. Also it's not nearly as heavy as a few the youtubers would have you believe... ( those boys need to start lifting )
|
danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Wednesday, March 13, 2019 0:33 PM
(permalink)
 CASE - LED's enabled... even through the tinted glass the corsair fans up top are blinding.
post edited by danperry13 - Wednesday, March 13, 2019 0:36 PM
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 12/12/2010
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: DG-77 BLACK BUILD
Wednesday, March 13, 2019 1:17 AM
(permalink)
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8899
- Reward points : 0
- Joined: 10/14/2003
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Wednesday, March 13, 2019 1:18 AM
(permalink)
Great looking build. I used the same case for my girlfriends build and have to say it a good looking case. As for your cables right now they don't look bad it could be better but no shame in what you showed us. Hopefully the planned AIO is EVGA but that is just because having the matching RGB lighting I feel is really cool.
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: DG-77 BLACK BUILD
Wednesday, March 13, 2019 1:19 AM
(permalink)
|
repo1979
FTW Member
- Total Posts : 1126
- Reward points : 0
- Joined: 2/22/2017
- Location: UTAH
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Wednesday, March 13, 2019 2:23 AM
(permalink)
|
danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Wednesday, March 13, 2019 2:48 AM
(permalink)
Hoggle
Great looking build. I used the same case for my girlfriends build and have to say it a good looking case. As for your cables right now they don't look bad it could be better but no shame in what you showed us. Hopefully the planned AIO is EVGA but that is just because having the matching RGB lighting I feel is really cool.
I went with a corsair 280 mm to replace my water 3.0 because i can't bring myself to trust thermal take any more. I would of went with EVGA but would of been an extra set of LED fans, and I've had no issues with corsair AIO's in the past. https://www.corsair.com/c...atinum/p/CW-9060038-WWAs for the cabling, it's not awful, but I'm not doing all my cable wraps, and tie downs until I've got all my hardware installed :P I've got red and black cable extensions that will be feeding into the Pci ports on my rtx card and motherboard you can see one already installed on the top left hand side of the case for the PC power. I think with the white lighting it's going to look ok :P Just in the process now of removing the dg-77 decals and the white out line around the edge of the case... stole the girlfriends nail polish remover unfortunately whatever paint they used doesn't react to acetone so i'm gently going at it with my pocket knife lol. 
post edited by danperry13 - Wednesday, March 13, 2019 2:52 AM
|
danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Wednesday, March 13, 2019 4:11 AM
(permalink)
* Build fun! Corsair LL120 fans doen't work along side the HD120 RBG fan controller :P - The LL120's need the commander or a seperate USB hub to function apparently... So from i'm getting from this the hd120's will function off their original hub but it will be hooked up to the commander pro :P So another few days until my lighting is taken care of 100% . Guess it was just a dead rbg port.. going to get the commander anyways for the software control. 
post edited by danperry13 - Wednesday, March 13, 2019 5:49 AM
|
Tech_JoseC
iCX Member
- Total Posts : 383
- Reward points : 0
- Joined: 6/5/2017
- Location: EVGA
- Status: offline
- Ribbons : 2
Re: DG-77 BLACK BUILD
Thursday, March 14, 2019 0:40 PM
(permalink)
Very nice!! Build looks very clean 
|
danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Thursday, March 14, 2019 1:45 AM
(permalink)
EVGATech_JoseC
Very nice!! Build looks very clean
Looks more like i haven't properly ran my cables yet :P
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8899
- Reward points : 0
- Joined: 10/14/2003
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Thursday, March 14, 2019 4:32 AM
(permalink)
It looks nice I saw it on the Facebook page already.
|
danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Thursday, March 14, 2019 5:07 AM
(permalink)
This gets routed to the FB? I don't even have fb... If someones posting this on the FB group their either stealing photos from here or EVGA posts on there :P
post edited by danperry13 - Thursday, March 14, 2019 8:04 PM
|
danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Friday, March 15, 2019 2:00 AM
(permalink)
 Still waiting on the NEW AIO, and fan controller so I took the time and started cleaning up my extension cables and adding the cable combs onto the PCI - and 2 motherboard cables... really tightened up the look - just need to get those 2 last parts in and clean up the spider web of "fan" cables running all over the place ( I could straighten them up now by hiding the runs but whats the point.
|
danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Saturday, March 16, 2019 6:02 PM
(permalink)
Corsair h115i platinum is now installed - Now i'm patiently awaiting my controller board and extensions for my RBG strips to be installed. Managing this many wires in such a small space is definitely becoming challenging not going to lie :P 
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 31353
- Reward points : 0
- Joined: 12/12/2010
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 123
Re: DG-77 BLACK BUILD
Monday, March 18, 2019 4:06 AM
(permalink)
Cool Rig
Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members
I am a Volunteer Moderator - not an EVGA employee
Older RIG projects RTX Project Nibbler
When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
|
hillmar77
Superclocked Member
- Total Posts : 111
- Reward points : 0
- Joined: 9/11/2009
- Location: Vancouver, Canada
- Status: offline
- Ribbons : 2
Re: DG-77 BLACK BUILD
Monday, March 18, 2019 4:36 AM
(permalink)
Looking good! Love the black and red theme!
|
Hoggle
EVGA Forum Moderator
- Total Posts : 8899
- Reward points : 0
- Joined: 10/14/2003
- Location: Eugene, OR
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Monday, March 18, 2019 6:13 AM
(permalink)
danperry13
This gets routed to the FB? I don't even have fb... If someones posting this on the FB group their either stealing photos from here or EVGA posts on there :P
I was thinking of the Rogue One build someone did. The internals are about the same and the desk setup is about the same but the case was very different.
|
danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Monday, March 18, 2019 11:31 PM
(permalink)
|
danperry13
Superclocked Member
- Total Posts : 114
- Reward points : 0
- Joined: 7/9/2014
- Status: offline
- Ribbons : 4
Re: DG-77 BLACK BUILD
Tuesday, March 19, 2019 4:54 AM
(permalink)
|