EVGA
Prev Thread
Next Thread

EVGA Precision XOC Version 6.1.10 Cooling Fan inop & 6.1.11 memory fan bug (1080 TI FTW3)

Author
Post
Essentials Only Full Version
Darkmemories
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 7/23/2017
  • Status: offline
  • Ribbons : 0
Monday, July 24, 2017 5:07 AM (permalink)
6.1.10 update made fans inoperative, and my 1080ti FTW3 got into the 90's (Celsius). I noticed promptly, backed out of game, and checked operation of all three fans. EVGA Precision XOC Version 6.1.10 would not let me control the fans, so I uninstalled 6.1.10 and rolled back to 6.1.8. Everything appears to be working fine except temperatures have now shifted 5-8 degrees higher. Prior to the fan issue, I've never hit the 70's (Celsius) playing the same games, with the same settings. Hell, I've haven't even tried to overclock further than the set bios out of the box yet. I saw the 6.1.11 update, which stated the fix, but anytime my mouse curser hovers over the memory fan bar, it moves it. I've always set to aggressive fan curves, but this bug makes very difficult to set. Anyone else have these issues? Good thing there is a three year warranty..... 
#1

7 Replies Related Threads
    Speck1
    New Member
    • Total Posts : 5
    • Reward points : 0
    • Joined: 7/16/2017
    • Status: offline
    • Ribbons : 0
    Re: EVGA Precision XOC Version 6.1.10 Cooling Fan inop & 6.1.11 memory fan bug (1080 TI FT Monday, July 24, 2017 1:15 PM (permalink)
    I just got my 1080ti FTW3 yesterday and using 6.1.11 I am have a problem with my memory fan slider as well, its slightly different to the issue you are having though. When the fans are on auto Both GPU and Power will move up and down according to the fan speed but the memory slider will just sit on 0 even when the memory fan is spinning. When I click the "M" the fan slider will jump up to the correct value. There seams to be a bug with that memory fan slider.
    I am also using the aggressive fan curve preset but seem to be getting high temps than what others are on their FTW3.
    #2
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31353
    • Reward points : 0
    • Joined: 12/12/2010
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: EVGA Precision XOC Version 6.1.10 Cooling Fan inop & 6.1.11 memory fan bug (1080 TI FT Monday, July 24, 2017 5:31 PM (permalink)
    Moving to EVGA software

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #3
    Darkmemories
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 7/23/2017
    • Status: offline
    • Ribbons : 0
    Re: EVGA Precision XOC Version 6.1.10 Cooling Fan inop & 6.1.11 memory fan bug (1080 TI FT Monday, July 24, 2017 6:35 PM (permalink)
    10-4 Cool GTX. Sorry, I'm new to this forum.
     
    Speck1
    I just got my 1080ti FTW3 yesterday and using 6.1.11 I am have a problem with my memory fan slider as well, its slightly different to the issue you are having though. When the fans are on auto Both GPU and Power will move up and down according to the fan speed but the memory slider will just sit on 0 even when the memory fan is spinning. When I click the "M" the fan slider will jump up to the correct value. There seams to be a bug with that memory fan slider.
    I am also using the aggressive fan curve preset but seem to be getting high temps than what others are on their FTW3.


    Yes, mine was doing that also. I haven't had any problems with 6.1.8., it worked wonderful. I never noticed the higher temps until my card ran hot from 6.1.10. May have lost contact in a few spots, or warped one thousands of an inch, who knows. It still kicks butt & we have a warranty. 
    #4
    smk43
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 7/24/2017
    • Status: offline
    • Ribbons : 0
    Re: EVGA Precision XOC Version 6.1.10 Cooling Fan inop & 6.1.11 memory fan bug (1080 TI FT Monday, July 24, 2017 9:15 PM (permalink)
    I'm seeing the same problem with the memory fan bug.  I usually just move the slider on the Memory fan and then click the fan icon to enable auto control to get it working.
    #5
    MDeckerM
    FTW Member
    • Total Posts : 1683
    • Reward points : 0
    • Joined: 9/22/2015
    • Location: RwlRwlRwlRwl
    • Status: offline
    • Ribbons : 8
    Re: EVGA Precision XOC Version 6.1.10 Cooling Fan inop & 6.1.11 memory fan bug (1080 TI FT Monday, July 24, 2017 10:13 PM (permalink)
    Hello all,
     
    Very sorry to hear you are all experiencing this issue with PXOC v 16.1.11
     
    I will inform our Product Management team for review. Additional information is always appreciated.
    #6
    Speck1
    New Member
    • Total Posts : 5
    • Reward points : 0
    • Joined: 7/16/2017
    • Status: offline
    • Ribbons : 0
    Re: EVGA Precision XOC Version 6.1.10 Cooling Fan inop & 6.1.11 memory fan bug (1080 TI FT Wednesday, July 26, 2017 9:47 AM (permalink)
    EVGATech_MDecker
    Hello all,
     
    Very sorry to hear you are all experiencing this issue with PXOC v 16.1.11
     
    I will inform our Product Management team for review. Additional information is always appreciated.




    Thanks. With mine it seams that the memory fan slider wont update until I click the "M" or if I change the fan to manual then back to auto.
     
    After I have done this it will work for a while then it eventually freezes at a certain percentage and I will have to do what I stated above to get it to refresh. The memory fan will still spin according the fan profile though it just doesn't update on the slider.
    #7
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31353
    • Reward points : 0
    • Joined: 12/12/2010
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: EVGA Precision XOC Version 6.1.10 Cooling Fan inop & 6.1.11 memory fan bug (1080 TI FT Thursday, July 27, 2017 6:16 PM (permalink)
    6.1.13 is live now

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #8
    Home » All Forums » [Graphics Cards] » EVGA Precision X1 » EVGA Precision XOC Version 6.1.10 Cooling Fan inop & 6.1.11 memory fan bug (1080 TI FTW3)
    Jump to: