EVGA
Prev Thread
Next Thread

ftw3 Gpu fan and gpu voltage

Author
Post
Essentials Only Full Version
Dierock
New Member
  • Total Posts : 34
  • Reward points : 0
  • Joined: 5/16/2012
  • Status: offline
  • Ribbons : 0
Tuesday, May 30, 2017 6:13 PM (permalink)
Hello, I just received my ftw3 and I love it is very impressive in sight ..

1- are the gpu rpm not 0%? (Two of the three fans are stuck, but the gpu drops to 18% does not go off)
2-in osd precision can not see gpu voltage?
3- Can a voltage curve be made to the precision as the afterburner is made?
 
thanks
#1

5 Replies Related Threads
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: ftw3 Gpu fan and gpu voltage Tuesday, May 30, 2017 10:31 PM (permalink)
    1. I'm thinking all the fans should shutoff under 60c when running the master vbios.
    2. You should be able to see the voltage on the main screen where you adjust the sliders.
    3. Yes.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #2
    Dierock
    New Member
    • Total Posts : 34
    • Reward points : 0
    • Joined: 5/16/2012
    • Status: offline
    • Ribbons : 0
    Re: ftw3 Gpu fan and gpu voltage Tuesday, May 30, 2017 10:38 PM (permalink)
    thanks for answering.
    1- I am currently running the slave bios and the gpu fan does not shut down. Is 18%, the other two if they turn off.
    2- During the game can I see the voltage? Or solo in the main screen of the precision?
    #3
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: ftw3 Gpu fan and gpu voltage Tuesday, May 30, 2017 10:40 PM (permalink)
    Dierock
    thanks for answering.
    1- I am currently running the slave bios and the gpu fan does not shut down. Is 18%, the other two if they turn off.
    2- During the game can I see the voltage? Or solo in the main screen of the precision?


    No problem. 

    1. You'll need to use the master to get the fans to shutoff at idle.
    2. Solo in the main screen of precision.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #4
    Dierock
    New Member
    • Total Posts : 34
    • Reward points : 0
    • Joined: 5/16/2012
    • Status: offline
    • Ribbons : 0
    Re: ftw3 Gpu fan and gpu voltage Tuesday, May 30, 2017 10:49 PM (permalink)
    ok I understand. But which bios does the slave or master recommend? I'm trying a little OC.

    Up to the moment 1 hour from BF1 to 2050, but low to 2025 mhz.
     
    Maximum voltage on ftw3 is 1.062? Or is 1.093? The gpu -z shows me maximum 1,062.
    post edited by Dierock - Tuesday, May 30, 2017 11:02 PM
    #5
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: ftw3 Gpu fan and gpu voltage Tuesday, May 30, 2017 11:58 PM (permalink)
    The slave is recommend when overclocking. Max voltage is between 1.062-1.093 depending on how you have the curve setup.


    See my current build here: https://forums.evga.com/My-bench-rig-unlimited-power-m3596024.aspx
    RTX 2080 Ti 4-way SLI?!?!: https://forums.evga.com/RTX-2080-Ti-4way-SLi-set-by-yours-truly-m2954756.aspx
    #6
    Home » All Forums » [Graphics Cards] » All Other EVGA Graphics Cards » ftw3 Gpu fan and gpu voltage
    Jump to: