bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
http://www.evga.com/precisionxoc/Version 6.1.6 Release: 5/3/2017 - Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
To Fix an Install. Remove NVIDIA Drivers RebootUsing the Registry Editor I delete:Win7 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Video HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Video Win10 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\VideoIgnore the ErrorAlmost the same as removing the Cards from the computer. Install your Graphics Driver and you are done For a new XOC I remove XOC Delete Folders and remove NVIDIA Divers Run DDU in Save Mode Install New Graphics Drivers then install XOC.
post edited by bcavnaugh - Tuesday, May 09, 2017 8:16 PM
|
DukeCLR
iCX Member
- Total Posts : 254
- Reward points : 0
- Joined: 1/7/2007
- Location: All over.
- Status: offline
- Ribbons : 1
Re: EVGA Precision XOC 6.1.6
Wednesday, May 03, 2017 4:06 PM
(permalink)
bcavnaugh
Coming Soon
Soon?
PhanTeks Enthoo Evolv TGE Intel Core i7 8700k @ 5.0 EVGA Z390 FTW EVGA GTX 3080 FTW3 GSkill Ripjaws 16Gb EVGA CLC280 PSU EVGA 850 T2
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA Precision XOC 6.1.6
Wednesday, May 03, 2017 4:11 PM
(permalink)
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Wednesday, May 03, 2017 4:14 PM
(permalink)
Nice Changes but make sure you remove the Old Version and restart your PC before you install the new version.
post edited by bcavnaugh - Wednesday, May 03, 2017 4:18 PM
|
DukeCLR
iCX Member
- Total Posts : 254
- Reward points : 0
- Joined: 1/7/2007
- Location: All over.
- Status: offline
- Ribbons : 1
Re: EVGA Precision XOC 6.1.6
Wednesday, May 03, 2017 4:15 PM
(permalink)
Nice I was just getting bored, I'll give it a workout.
PhanTeks Enthoo Evolv TGE Intel Core i7 8700k @ 5.0 EVGA Z390 FTW EVGA GTX 3080 FTW3 GSkill Ripjaws 16Gb EVGA CLC280 PSU EVGA 850 T2
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Wednesday, May 03, 2017 4:15 PM
(permalink)
DukeCLR
Nice I was just getting bored, I'll give it a workout.
Why, you have your 100 
|
DukeCLR
iCX Member
- Total Posts : 254
- Reward points : 0
- Joined: 1/7/2007
- Location: All over.
- Status: offline
- Ribbons : 1
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Wednesday, May 03, 2017 4:35 PM
(permalink)
bcavnaugh
DukeCLR
Nice I was just getting bored, I'll give it a workout.
Why, you have your 100
Lol. I did get it installed but since I have a lowly SC2 I didn't notice a difference, it worked just like the last version.
PhanTeks Enthoo Evolv TGE Intel Core i7 8700k @ 5.0 EVGA Z390 FTW EVGA GTX 3080 FTW3 GSkill Ripjaws 16Gb EVGA CLC280 PSU EVGA 850 T2
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Wednesday, May 03, 2017 4:49 PM
(permalink)
DukeCLR
bcavnaugh
DukeCLR
Nice I was just getting bored, I'll give it a workout.
Why, you have your 100
Lol. I did get it installed but since I have a lowly SC2 I didn't notice a difference, it worked just like the last version.
Same Here, running 6.1.2 on all my Pascal Cards ATM.
|
z999z3mystorys
CLASSIFIED Member
- Total Posts : 3910
- Reward points : 0
- Joined: 11/29/2008
- Location: at my current location
- Status: offline
- Ribbons : 23
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Wednesday, May 03, 2017 5:30 PM
(permalink)
was version 6.1.5 skipped, or did 6.1.6 come out before it was ready or something?
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Wednesday, May 03, 2017 5:36 PM
(permalink)
z999z3mystorys
was version 6.1.5 skipped, or did 6.1.6 come out before it was ready or something?
Yep! I bet 6.1.5 was ready but without Ti FTW3 Support so they waited until 6.1.6 was ready.
|
Nemes1s89
New Member
- Total Posts : 98
- Reward points : 0
- Joined: 3/16/2016
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Wednesday, May 03, 2017 6:50 PM
(permalink)
n1ce lets hope it will be ok!
|
FattysGoneWild
CLASSIFIED Member
- Total Posts : 2660
- Reward points : 0
- Joined: 4/25/2011
- Location: KFC
- Status: offline
- Ribbons : 3
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Wednesday, May 03, 2017 6:59 PM
(permalink)
Minor bug still exist. When you set the fan profile to "aggressive" the name wont stay and says "custom" This has been on going for several releases now.
HP Omen 880-160se custom ordered OS: Windows 10 64 bit MOBO: HP Tampa2 CPU: Intel i7 8700k @4.8GHz RAM: 32GB DDR4 2400 GPU: PNY XLR8 RTX 3080 PSU: Delta 750w 80 Plus Platinum NVMe M.2 SSD: Samsung 512GB MZVLW512HMJP SSD: 250GB Samsung 860 EVO HDD: 2TB Seagate Barracuda ST2000DM001 Sound: Logitech Z623 THX 2.1 Speakers Monitor: Dell S2716DG 2560x1440 @144Hz G-Sync calibrated with ColorMunki Display Keyboard: HP Omen 1100 Mouse: HP Omen 600
|
sephanubisiii
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 4/5/2012
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Friday, May 05, 2017 2:56 AM
(permalink)
I am still receiving issues of the OSD font not saving size and not registering the speed on the G19 keyboard, but I have yet to adjust certain things so this could fix soon. Still receiving a weird crash when clicking the color for backplate LED, but the RGB is finally registering colors correctly. So, so far, things look good. The only complaint I have is the stock auto fan speed curve system that needs to be tweaked as MSI Afterburner is managing fan speeds a lot better than Precision XOC
|
2ndr3ality
New Member
- Total Posts : 4
- Reward points : 0
- Joined: 3/29/2017
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Saturday, May 06, 2017 1:50 AM
(permalink)
Ok, so i just installed my FTW3, it was working great until i installed XOC. Now my power and memory LED's are constantly red and i'm not even getting a temp reading for those in XOC. Also, i cannot get my fans to work correctly now matter how i set the curve. They're either wide open or not running. (I'm guessing it's because i'm not getting power reading??) I left them at default and ran bench marked with Time Spy and none of the fans kicked on. GPU was way over what it should have been to kick the fans on.
For now, i'm going to manually set them to run so i don't over heat anything. But has anyone else run into this yet?? i know it's just the first round of these cards getting out so probably not, but i'm crossing my fingers. I mean, this is a super BA card, but man, to have it acting wonky like this from the software... meh.
Oh, also, if i try to manually set the LED color of the power or memory LED, XOC immediately crashes. Every time :/
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Saturday, May 06, 2017 4:47 AM
(permalink)
2ndr3ality
Ok, so i just installed my FTW3, it was working great until i installed XOC. Now my power and memory LED's are constantly red and i'm not even getting a temp reading for those in XOC. Also, i cannot get my fans to work correctly now matter how i set the curve. They're either wide open or not running. (I'm guessing it's because i'm not getting power reading??) I left them at default and ran bench marked with Time Spy and none of the fans kicked on. GPU was way over what it should have been to kick the fans on.
For now, i'm going to manually set them to run so i don't over heat anything. But has anyone else run into this yet?? i know it's just the first round of these cards getting out so probably not, but i'm crossing my fingers. I mean, this is a super BA card, but man, to have it acting wonky like this from the software... meh.
Oh, also, if i try to manually set the LED color of the power or memory LED, XOC immediately crashes. Every time :/
Give this a try; Remove XOC Delete Folders and remove NVIDIA DiversReboot PC Run DDU in Save ModeReboot PCUsing the Registry Editor Delete:Win7 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Video HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\VideoIgnore the Errors Win10 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\VideoIgnore the ErrorReboot PC Install New Graphics DriversReboot PCThen install XOC.
post edited by bcavnaugh - Saturday, May 06, 2017 4:50 AM
|
mwcook
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 3/6/2006
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Saturday, May 06, 2017 9:18 AM
(permalink)
Still does not show GPU % usage when in "K" mode
|
Daz1967
New Member
- Total Posts : 92
- Reward points : 0
- Joined: 1/27/2009
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Saturday, May 06, 2017 8:40 PM
(permalink)
I've just installed EVGA Precision XOC v6.16 from v6.13 and when I opened it there was a message about closing 3D applications to update fans/firmwares or something. I closed Edge then a window popped up saying Updated OK.
What did that mean? Has Precision updated the firmware or fans on my GTX 1080 Ti SC2?
The only reason I am asking is that I have never seen this message before.
Intel Core i7-4770K @ 4.0 GHz, ASUS Z87-DELUXE motherboard v2103, 16 GB Corsair Vengeance LP 1,600 MHz memory, 11 GB EVGA GeForce GTX 1080 Ti SC2 graphics, Creative SB Sound Blaster Z sound, 1 TB Samsung 850 EVO SSD + 9 TB SATAIII hard drives, XFX Pro Black Edition 850 W, Windows 10 Pro v1703 64-bit
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Saturday, May 06, 2017 9:10 PM
(permalink)
Daz1967
I've just installed EVGA Precision XOC v6.16 from v6.13 and when I opened it there was a message about closing 3D applications to update fans/firmwares or something. I closed Edge then a window popped up saying Updated OK.
What did that mean? Has Precision updated the firmware or fans on my GTX 1080 Ti SC2?
The only reason I am asking is that I have never seen this message before.
That when you install software you need to have all other applications Closed. Some even need you to disable your Virus Software.
|
Daz1967
New Member
- Total Posts : 92
- Reward points : 0
- Joined: 1/27/2009
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Saturday, May 06, 2017 9:43 PM
(permalink)
Well I'm not impressed with v6.1.6 so far as it has crashed about five times just navigating the menus! The two fans are now shown in the main window, which is a nice improvement over v6.1.3, but while checking out the changes I noticed an additional LED option for the backplate alongside the one for the logo. However, the pulldown doesn't do anything (it appears blank) and clicking on the white square to the right, presumably the colour change option, crashes the program every time. Is this option meant for the FTW3? If so then why is showing for the SC2? Much as I would love to use EVGA software with my EVGA graphics card, this software is simply too unstable and finicky to use on my system. Not only that but the tiny fonts for the menus make it hard to read on my 25" 2560x1440 display, the menus are poorly laid out and the on-screen display options are lacking compared with MSI Afterburner. I cannot tweak the OSD to, say, show all the temperatures on one line and there's only one for the fan speed despite the fact my card has two fans (there is a separate fan and power tachometer though). It's a crying shame that Unwinder stopped developing EVGA Precision because I personally think the software would be much better if he was. Sorry EVGA but I think I will be sticking with MSI Afterburner for the time being and just leave fan control on auto (since Afterburner only shows one). If I need to check the sensor temperatures then I can just have a quick glance at my card's LEDs through the case window.
post edited by Daz1967 - Tuesday, May 09, 2017 12:21 AM
Intel Core i7-4770K @ 4.0 GHz, ASUS Z87-DELUXE motherboard v2103, 16 GB Corsair Vengeance LP 1,600 MHz memory, 11 GB EVGA GeForce GTX 1080 Ti SC2 graphics, Creative SB Sound Blaster Z sound, 1 TB Samsung 850 EVO SSD + 9 TB SATAIII hard drives, XFX Pro Black Edition 850 W, Windows 10 Pro v1703 64-bit
|
RadioActiveLobster
New Member
- Total Posts : 47
- Reward points : 0
- Joined: 3/27/2017
- Status: offline
- Ribbons : 1
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Sunday, May 07, 2017 4:57 PM
(permalink)
I agree.
Afterburner and RTSS have so many more features and flexibility than Precision.
It's a pain that I can't do custom 3 fan profiles with Afterburner but the other benefits seem to outweigh the downsides.
Ryzen 3900x - ASUS x570 Crosshair VIII Hero - Noctua NH-U12A - CaseLabs BH832GB G.Skill DDR4 3600 - EVGA 1080Ti FTW3 - EVGA SuperNova 750 G51TB NVMe OS Drive, 256GB SSD, 960GB SSD, 1 TB NVMe, 2 TB SSD1 ACER 100Hz G-Sync z35p 3440x1440p - 1 ACER 144Hz G-Sync XB270HU 2560x1440p - 1x BenQ 60Hz GW2765 2560x1440pCorsair K95 RGB Cherry MX Browns - Corsair Scimitar RGB
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Monday, May 08, 2017 9:56 PM
(permalink)
mwcook
Still does not show GPU % usage when in "K" mode
That is normal.
|
mwcook
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 3/6/2006
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Tuesday, May 09, 2017 2:38 AM
(permalink)
Sajin
mwcook
Still does not show GPU % usage when in "K" mode
That is normal.
It would seem that GPU % is one of the most important things to show. Why would using "K" mode be any different? It is like a benchmark program not working when you overclock your processor.
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Tuesday, May 09, 2017 3:03 AM
(permalink)
mwcook
Sajin
mwcook
Still does not show GPU % usage when in "K" mode
That is normal.
It would seem that GPU % is one of the most important things to show. Why would using "K" mode be any different? It is like a benchmark program not working when you overclock your processor.
Due to the way the k-boost feature is programmed it messes up the nvapi readings when enabled. If you want to see your gpu usage while having your gpu forced to max performance I'd recommend using the lock feature on the voltage/frequency curve editor inside msi afterburner as it's basically the same thing as k-boost.  You can read more about the lock feature here.
post edited by Sajin - Tuesday, May 09, 2017 6:49 AM
|
Daz1967
New Member
- Total Posts : 92
- Reward points : 0
- Joined: 1/27/2009
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Tuesday, May 09, 2017 12:27 AM
(permalink)
RadioActiveLobster
I agree.
Afterburner and RTSS have so many more features and flexibility than Precision.
It's a pain that I can't do custom 3 fan profiles with Afterburner but the other benefits seem to outweigh the downsides. I *want* to like EVGA Precision XOC, I really do, as it has features available in it - the dual fan control, the LED options, etc - that MSI Afterburner doesn't. However, every time I use it I end up getting frustrated at its poorly laid out menus, its hard-to-read teensy-tiny fonts, its cumbersome and lacking OSD options and the fact that it seems incredibly prone to crashing on my system (especially if I click the backplate LED colour option...). I've decided to give up on it for now and stick with Afterburner. I will keep checking out the updates to Precision XOC though in the hope that the software will mature into something as user-friendly, well-laid out and stable as Afterburner. Does anyone know if setting a custom profile in Afterburner applies it to both fans on the SC2 or is it only applied to the GPU fan?
Intel Core i7-4770K @ 4.0 GHz, ASUS Z87-DELUXE motherboard v2103, 16 GB Corsair Vengeance LP 1,600 MHz memory, 11 GB EVGA GeForce GTX 1080 Ti SC2 graphics, Creative SB Sound Blaster Z sound, 1 TB Samsung 850 EVO SSD + 9 TB SATAIII hard drives, XFX Pro Black Edition 850 W, Windows 10 Pro v1703 64-bit
|
DukeCLR
iCX Member
- Total Posts : 254
- Reward points : 0
- Joined: 1/7/2007
- Location: All over.
- Status: offline
- Ribbons : 1
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Tuesday, May 09, 2017 12:55 AM
(permalink)
Daz1967
RadioActiveLobster
Does anyone know if setting a custom profile in Afterburner applies it to both fans on the SC2 or is it only applied to the GPU fan?
As far as I have found the custom fan profile in AB will only run the GPU fan, the power fan will run on its own and the power LEDs stay blue.
PhanTeks Enthoo Evolv TGE Intel Core i7 8700k @ 5.0 EVGA Z390 FTW EVGA GTX 3080 FTW3 GSkill Ripjaws 16Gb EVGA CLC280 PSU EVGA 850 T2
|
Bobmitch
CLASSIFIED ULTRA Member
- Total Posts : 7822
- Reward points : 0
- Joined: 5/7/2007
- Status: offline
- Ribbons : 49
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Tuesday, May 09, 2017 12:58 AM
(permalink)
Daz1967
RadioActiveLobster
I agree.
Afterburner and RTSS have so many more features and flexibility than Precision.
It's a pain that I can't do custom 3 fan profiles with Afterburner but the other benefits seem to outweigh the downsides.
I *want* to like EVGA Precision XOC, I really do, as it has features available in it - the dual fan control, the LED options, etc - that MSI Afterburner doesn't. However, every time I use it I end up getting frustrated at its poorly laid out menus, its hard-to-read teensy-tiny fonts, its cumbersome and lacking OSD options and the fact that it seems incredibly prone to crashing on my system (especially if I click the backplate LED colour option...).
I've decided to give up on it for now and stick with Afterburner. I will keep checking out the updates to Precision XOC though in the hope that the software will mature into something as user-friendly, well-laid out and stable as Afterburner.
Does anyone know if setting a custom profile in Afterburner applies it to both fans on the SC2 or is it only applied to the GPU fan?
When I had the 1080 SC2 ICX, I wondered the same thing...so I chatted with Unwinder, the author of Afterburner. The fan curve of AB only applies to the GPU fan...so the Power fan is dependent upon the card's bios. Unwinder will NOT add asynchronous fan control unless other companies (especially MSI) adopt the technology as well. So right now...the SC2 or FTW2 or FTW 3 versions of cards are solely dependent upon Precision. See here: http://forums.guru3d.com/showthread.php?t=412844
MSI MAG X670-E Tomahawk; Ryzen 7 7800X3D; Asus TUF RTX 4070 TI OC; Seasonic Vertex GX-1000 PSU; 32 GB Corsair Vengeance DDR5-6000 CL30 RGB; Corsair iCue Link H150i LCD 360MM AIO; 2-Western Digital Black 4 TB SN850X NVMe; Creative SoundBlaster Z; Lian Li Lancool III; Corsair K70 RGB Pro MX Speed Silver Keyboard; Razer Viper 8K Mouse
Heatware: https://www.heatware.com/u/72402 Affiliate code: 1L2RV0BNQ6 Associate Code: UD82LJP3Y1FIQPR
|
dekoproject
New Member
- Total Posts : 8
- Reward points : 0
- Joined: 1/16/2011
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Tuesday, May 09, 2017 7:48 PM
(permalink)
i just installed my new 1080ti ftw 3 and on the main page of precision xoc it doesn't even show my 2 others fans even if it detect my card correctly. The only fan that work is the gpu one the other two dont work and it show red led .. can't seem to get them to work..
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Tuesday, May 09, 2017 7:53 PM
(permalink)
dekoproject
i just installed my new 1080ti ftw 3 and on the main page of precision xoc it doesn't even show my 2 others fans even if it detect my card correctly. The only fan that work is the gpu one the other two dont work and it show red led .. can't seem to get them to work..
https://forums.evga.com/FindPost/2662506
|
bcavnaugh
The Crunchinator
- Total Posts : 38516
- Reward points : 0
- Joined: 9/19/2012
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Tuesday, May 09, 2017 8:10 PM
(permalink)
Sajin
dekoproject
i just installed my new 1080ti ftw 3 and on the main page of precision xoc it doesn't even show my 2 others fans even if it detect my card correctly. The only fan that work is the gpu one the other two dont work and it show red led .. can't seem to get them to work..
https://forums.evga.com/FindPost/2662506
No real need to Remove the Graphics Card That is you can skip Step 3: Remove card from PC and power on PC without card and delete the NVIDIA folder in C/:: Drive And https://forums.evga.com/FindPost/2663640
post edited by bcavnaugh - Tuesday, May 09, 2017 8:13 PM
|
Kevkas
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 10/31/2015
- Location: Argentina
- Status: offline
- Ribbons : 0
Re: EVGA Precision XOC 6.1.6 •Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
Tuesday, May 16, 2017 4:01 AM
(permalink)
I don't know if this is the right place to report this, but I've been having this issue since v6.1.2 of EVGA PrecisionX OC: if I start a game and OSD turned off, and then toggle it using a key, it works, but as soon as I turn it off with the toggle key the game crashes. This happens with all games, and yes, I've tested v6.1.6 as well but it keeps crashing when I try to turn off the OSD while inside a game.
For now, I'm rolling back to v6.0.9, that one works ok.
FYI:
I'm using EVGA GeForce GTX 980 Ti Superclocked+ ACX 2.0+ 6GB Edition.
I'm using Windows 7 64-bits.
|