EVGA

GTX 1080 SC ACX 3.0 BIOS update

Author
falcompsx
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 9/8/2016
  • Status: offline
  • Ribbons : 0
Thursday, November 17, 2016 4:59 AM (permalink)
I've installed the BIOS update that is supposed to help protect my VRM's and ever since that update, now my fans run at 2200rpm whenever i'm in games... It sounds like a jet fighter trying to take off. The noise of this card is annoying now, but thats the least of my problems. Yes the fans run faster, and the chip stays much cooler, tops out around 70-71C(before it would go up to 75-80C under full load, which given the fan speed increase, this is good and expected. The problem is, my card no longer activates the boost clock. at all. It runs at 1709mhz all the time. The fan noise i'm not too worried about as i have a waterblock coming soon from EKWB which will eliminate the noise, as well as properly cool the VRM's, but what good is that going to do when the card's GPU Boost feature was disabled as a result of this bios update?? Is it possible to revert to the old BIOS so i can have my card boost again like it's supposed to? Really disappointed in this card as currently ANY other gtx 1080 would be faster than mine.
 
*edit*
attached a screen capture after running hwmonitor while playing a game for some time to show max temps, max gpu load, power draw, no idea why its drawwing 107% power to run at base clock speeds...also concerning. I did raise the power limit to see if that would let it boost at all, but no luck. Even when i'm on my desktop, it doesn't even clock down to idle speeds, but at least the fans spin down(mostly) and temps drop.
post edited by falcompsx - Thursday, November 17, 2016 5:02 AM

Attached Image(s)

#1

4 Replies Related Threads

    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: GTX 1080 SC ACX 3.0 BIOS update Thursday, November 17, 2016 6:24 AM (permalink)
    falcompsx
    Is it possible to revert to the old BIOS so i can have my card boost again like it's supposed to?

    Yes. You'll need to download the original vbios from here. You'll also need to use the latest version of nvflash which can be downloaded here to reflash the original vbios. 
    #2
    bob16314
    CLASSIFIED ULTRA Member
    • Total Posts : 7859
    • Reward points : 0
    • Joined: 11/8/2008
    • Location: Planet of the Babes
    • Status: offline
    • Ribbons : 761
    Re: GTX 1080 SC ACX 3.0 BIOS update Thursday, November 17, 2016 12:50 AM (permalink)
    falcompsx
    The problem is, my card no longer activates the boost clock. at all. It runs at 1709mhz all the time.
     
    Even when i'm on my desktop, it doesn't even clock down to idle speeds.



    Heard of that before too, which may be fixed by installing the Graphics Driver again after the BIOS update..If you do that, I suggest uninstalling with Display Driver Uninstaller in Safe Mode first before installing the NVIDIA Driver again.
     
    As for the screaming fans/fans control, you can use Precision XOC or MSI Afterburner for either predefined or custom fan speed curves, up to you, not required.
     
    Even after installing the older BIOS, if you do, I suggest all the above anyway.

    * Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * 
     
    "Whatever it takes, as long as it works" - Me
     
     
     
    #3
    Sajin
    EVGA Forum Moderator
    • Total Posts : 49227
    • Reward points : 0
    • Joined: 6/8/2010
    • Location: Texas, USA.
    • Status: offline
    • Ribbons : 199
    Re: GTX 1080 SC ACX 3.0 BIOS update Thursday, November 17, 2016 9:16 PM (permalink)
    The software could also be reading the clocks incorrectly. Have you checked your clocks with another program?
    #4
    falcompsx
    New Member
    • Total Posts : 6
    • Reward points : 0
    • Joined: 9/8/2016
    • Status: offline
    • Ribbons : 0
    Re: GTX 1080 SC ACX 3.0 BIOS update Thursday, November 17, 2016 10:33 PM (permalink)
    I haven't tried yet, but the idle and boost clocks were showing up just fine prior to doing the BIOS update. Once i have the card properly cooled and hopefully explosion proof, i'll start doing some more troubleshooting.
    #5
    Jump to: