EVGA

EVGA PowerLink Compatibility

Page: < 12 Showing page 2 of 2
Author
Post
Essentials Only Full Version
LUPAIN
New Member
  • Total Posts : 93
  • Reward points : 0
  • Joined: 2018/12/15 22:08:18
  • Location: Montreal
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2018/12/30 03:48:48 (permalink)
i was about to ask the question, my 970 is not listed but the connector looks good lol
#31
Vlada011
Omnipotent Enthusiast
  • Total Posts : 10257
  • Reward points : 0
  • Joined: 2012/03/25 00:14:05
  • Location: Belgrade-Serbia
  • Status: offline
  • Ribbons : 11
Re: EVGA PowerLink Compatibility 2019/05/25 00:26:47 (permalink)
Is it possible to turn these connectors upside down.
Because on my GPU locker is on top.  But still I have problem fan connector. I could remove him because GPU is on water but I would like to stay connected.
 
 

 
 
If not I need to bend VGA Cable on side because it's only 3.5cm to side panel. 
GPU barely fit, but he fit 1cm is from glass to widest part of graphic card. 
 
 
 
 

i7-5820K 4.5GHz/RVE10-EK Monoblock/Dominator Platinum 2666/ASUS GTX1080Ti Poseidon/SBZxR /Samsung 970 EVO PLus 1TB/850 EVO 1TB /EVGA 1200P2/Lian Li PC-O11WXC/EK XRES D5 Revo 100 Glass/Coolstream PE360-Noctua NF-A12x25 PWM x3
http://www.evga.com
http://www.intel.com
http://www.nvidia.com
https://watercool.de
http://www.lian-li.com
https://www.youtube.com/watch?v=PHMun5xiRe0
 
https://xdevs.com/guide/2080ti_kpe/#intro
https://www.evga.com/articles/01386/evga-sr-3-dark/
 
 
 

 
 
#32
Cool GTX
EVGA Forum Moderator
  • Total Posts : 31000
  • Reward points : 0
  • Joined: 2010/12/12 14:22:25
  • Location: Folding for the Greater Good
  • Status: online
  • Ribbons : 122
Re: EVGA PowerLink Compatibility 2019/05/25 00:45:03 (permalink)
Vlada011
Is it possible to turn these connectors upside down.
Because on my GPU locker is on top.  But still I have problem fan connector. I could remove him because GPU is on water but I would like to stay connected.
 
 

 
 
If not I need to bend VGA Cable on side because it's only 3.5cm to side panel. 
GPU barely fit, but he fit 1cm is from glass to widest part of graphic card. 
 
 
 
 



Update: NO, they are Not reversible.  You Would reverse the Ground & Power - So, they are Made to Only install 1 way  

[The locking clip on the removable adapter would stop you from accidentally reversing those parts]



 
I'm not sure - the documents do not actually say they do ---> I'll check the one I have on the shelf & report back
 
https://www.evga.com/supp...s/PowerLink_Manual.pdf
 
https://www.evga.com/products/pdf/600-PL-2816-LR_spec_sheet_v2.pdf
 
 

Attached Image(s)


Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

I am a Volunteer Moderator - not an EVGA employee

 https://foldingathome.org -->become a citizen scientist and contribute your compute power to help fight global health threats

RTX Project EVGA X99 FTWK Nibbler EVGA X99 Classified EVGA 3080Ti FTW3 Ultra


#33
Capt_Caveman
Superclocked Member
  • Total Posts : 132
  • Reward points : 0
  • Joined: 2005/12/09 14:41:35
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2020/09/25 12:33:08 (permalink)
Been using a Powerlink with my 1080ti FTW3 for a couple of years.  Started losing picture to my monitors and after removing the Powerlink everything working fine.  Thinking that the Powerlink was the issue, I purchased a new one but after a month same issue.  And when I remove the Powerlink, everything is fine.  Bad luck with another bad Powerlink?  Using an EVGA 850 G+ PSU.

AMD 5900X
EVGA 3080 FTW3
AsRock X570 Taichi / Noctua NH-U14S
G.Skill TridentZ Neo 32gb(16x2) 3600mhz CL16
Seagate Firecuda 520 2TB NVMe / Samsung 960 EVO 1TB NVMe
Corsair Crystal 570X Case
EVGA G3 850w
Soundblaster AE-5
Alienware AW3418DW and LG 27GP850-B
#34
themlharris
New Member
  • Total Posts : 100
  • Reward points : 0
  • Joined: 2020/09/27 12:20:40
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2020/09/28 13:51:53 (permalink)
Nice! Too bad this tech is slowly dying
#35
Data1987
New Member
  • Total Posts : 97
  • Reward points : 0
  • Joined: 2020/11/13 10:52:16
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2020/11/13 11:41:44 (permalink)
Do the really make a diference? electricaly?
#36
jayrwar
Superclocked Member
  • Total Posts : 113
  • Reward points : 0
  • Joined: 2020/05/27 06:42:57
  • Status: offline
  • Ribbons : 0
Flagged as Spam (1)
Re: EVGA PowerLink Compatibility 2020/12/14 19:07:19 (permalink)
Nice
#37
TomStev
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2021/01/12 12:51:16
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2021/01/19 01:31:14 (permalink)
anyone tried this on a 30 series yet?
#38
MKAALAWAJI
Superclocked Member
  • Total Posts : 112
  • Reward points : 0
  • Joined: 2020/12/22 03:16:29
  • Status: offline
  • Ribbons : 0
Flagged as Spam (1)
Re: EVGA PowerLink Compatibility 2021/01/19 03:18:04 (permalink)
Thanks 
#39
TomStev
New Member
  • Total Posts : 12
  • Reward points : 0
  • Joined: 2021/01/12 12:51:16
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2021/01/20 15:12:16 (permalink)
I answered my own question .  looks like on the 30 series, the ports are to far away for the arm to reach.  hopefully evga makes an update version of this product :)
#40
staypuft
CLASSIFIED Member
  • Total Posts : 4013
  • Reward points : 0
  • Joined: 2006/03/11 14:04:03
  • Location: USA
  • Status: offline
  • Ribbons : 31
Re: EVGA PowerLink Compatibility 2021/03/05 08:18:20 (permalink)
Confirmed that an EVGA PowerLink will fit the EVGA RTX 3060 XC (12G-P5-3655-KR, 12G-P5-3657-KR).  Guessing it will also fit the similar RTX 3060Ti XC (08G-P5-3663-KR).
 
Also confirm (no pic yet) that it will NOT fit the RTX 3070 XC3 (08G-P5-3755-KR).  Presumably this means that it won't fit the nearly identical RTX 3070 XC3's (08G-P5-3751-KR, 08G-P5-3753-KR) and RTX 3060Ti FTW3's (08G-P5-3665-KR, 08G-P5-3667-KR).  RTX 3080 and 3090 XC3's look similar to the 3070 design, but no idea if the fitment is also an issue.  No samples to test...
 
 

Attached Image(s)


Interested in a discount on EVGA products?
Click here for details and enter this Associates code at checkout >> 2ILPLQQ8IWY8DPN
 
2021 Build: Gigabyte Z590 Ultra | Core i7-10700K | be quiet! Dark Rock Pro 4 | 32GB G.Skill Trident Z DDR4-3200
EVGA RTX 3080 FTW3 Ultra | Samsung 970 EVO 500GB | Seasonic Focus GX-850 | Fractal Design Meshify C | Asus TUF VG27AQL1A
#41
Swemmel
Superclocked Member
  • Total Posts : 107
  • Reward points : 0
  • Joined: 2021/04/28 00:25:14
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2021/04/28 08:28:35 (permalink)
NICE :)
 
#42
Armons account
Superclocked Member
  • Total Posts : 142
  • Reward points : 0
  • Joined: 2021/04/27 21:26:13
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2021/04/28 15:38:16 (permalink)
looks like a solution to a problem they can fix lol

Rig specs #1: Rtx 3070 FE (on air), 5900x, 64gb crucial ballistix 3600mhz CL16 RGB Ram,  addlink 2tb nvme ssd, WD SN750 1tb nvme ssd, bitspower water cooling parts for cpu (tubing, block, rad, distro plate), ASUS B550 XE, corsair RM850x, Lian Li o11 dynamic
 
Rig specs #2: EVGA GTX 970 SC (on air), 9700k, 32gb crucial ballistix 3200mhz CL16 RGB Ram, Seagate 2TB HDD, OCZ vertex 4 128gb SATA SSD, lian li Galahad 240mm AIO (For CPU), gigabyte Z390 M Gaming, corsair cx650M, Corsair "big boy case" Carbide Series Air 540
 
Rig specs #3: 2x XFX Radeon HD 7870 ghost (on air in cross fire mode), Some AMD FX 8 core CPU, 32gb Gskill 1600mhz CL9 RAM, Inland 128gb SATA SSD, some old corsair AM3+ 240mm AIO (for CPU), ASUS Crosshair V Formula-Z, An old Coolermaster 1200watt 80+ Gold rated PSU, Phanteks Eclipse (PH-EC300PTG_BK)
 
 
#43
Armons account
Superclocked Member
  • Total Posts : 142
  • Reward points : 0
  • Joined: 2021/04/27 21:26:13
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2021/04/28 15:40:55 (permalink)
staypuft
Confirmed that an EVGA PowerLink will fit the EVGA RTX 3060 XC (12G-P5-3655-KR, 12G-P5-3657-KR).  Guessing it will also fit the similar RTX 3060Ti XC (08G-P5-3663-KR).
 
Also confirm (no pic yet) that it will NOT fit the RTX 3070 XC3 (08G-P5-3755-KR).  Presumably this means that it won't fit the nearly identical RTX 3070 XC3's (08G-P5-3751-KR, 08G-P5-3753-KR) and RTX 3060Ti FTW3's (08G-P5-3665-KR, 08G-P5-3667-KR).  RTX 3080 and 3090 XC3's look similar to the 3070 design, but no idea if the fitment is also an issue.  No samples to test...
 
 


looks good tho, looks like it would have trouble fitting in my case.

Rig specs #1: Rtx 3070 FE (on air), 5900x, 64gb crucial ballistix 3600mhz CL16 RGB Ram,  addlink 2tb nvme ssd, WD SN750 1tb nvme ssd, bitspower water cooling parts for cpu (tubing, block, rad, distro plate), ASUS B550 XE, corsair RM850x, Lian Li o11 dynamic
 
Rig specs #2: EVGA GTX 970 SC (on air), 9700k, 32gb crucial ballistix 3200mhz CL16 RGB Ram, Seagate 2TB HDD, OCZ vertex 4 128gb SATA SSD, lian li Galahad 240mm AIO (For CPU), gigabyte Z390 M Gaming, corsair cx650M, Corsair "big boy case" Carbide Series Air 540
 
Rig specs #3: 2x XFX Radeon HD 7870 ghost (on air in cross fire mode), Some AMD FX 8 core CPU, 32gb Gskill 1600mhz CL9 RAM, Inland 128gb SATA SSD, some old corsair AM3+ 240mm AIO (for CPU), ASUS Crosshair V Formula-Z, An old Coolermaster 1200watt 80+ Gold rated PSU, Phanteks Eclipse (PH-EC300PTG_BK)
 
 
#44
Hoggle
EVGA Forum Moderator
  • Total Posts : 10102
  • Reward points : 0
  • Joined: 2003/10/13 22:10:45
  • Location: Eugene, OR
  • Status: offline
  • Ribbons : 4
Re: EVGA PowerLink Compatibility 2021/04/28 15:41:26 (permalink)
Armons account
looks like a solution to a problem they can fix lol


It could be done with a new product I guess. It does clean up the cables a bit but I wonder on a 3090 about the room since it could be blocking airflow for such a wide card.

Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
 
 
#45
wmmills
CLASSIFIED ULTRA Member
  • Total Posts : 5679
  • Reward points : 0
  • Joined: 2006/01/04 20:47:29
  • Location: New Jersey
  • Status: offline
  • Ribbons : 40
Re: EVGA PowerLink Compatibility 2021/04/28 22:23:57 (permalink)
The powerlink fits the 3070 xc3 ultra cause I'm using it on mine now. This card is getting stepped up to the 3090 this week, I just haven't sent it out yet.

post edited by wmmills - 2021/04/29 06:49:04

Attached Image(s)


MOBO: EVGA x299 Dark, CPU: I9 10900X, RAM: Patriot Viper RGB 3600 32gb, SSD: Samsung 860 EVO 1TB, M2: Samsung 970 EVO+ 1TB, PSU: CoolerMaster M2 1500, CPU HSF: EVGA 240 CLC HSF~ P/P EK Furious Vardar, G-CARD:EVGA RTX3090 FTW3 Ultra Gaming w/Hybrid kit and Noctua IPPC 3000 P/P, CASE: LIAN-LI PC-V2010B w/ Window mod, OS: Windows 10 Pro 64bit, MON: Alienware AW3821DW

 New EVGA product? Register it NOW with this link:
http://www.evga.com/register/default.asp?affiliatecode=4QFQRAMOII
 Help Our Vets From K-2!
[link=https://strongholdfreedom
#46
ijosegomez
New Member
  • Total Posts : 98
  • Reward points : 0
  • Joined: 2021/06/01 06:10:27
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2021/06/01 15:32:47 (permalink)
Dude that looks so nice! 
#47
frankcro
Superclocked Member
  • Total Posts : 101
  • Reward points : 0
  • Joined: 2021/02/10 12:16:29
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2021/06/03 00:24:50 (permalink)
Thanks
#48
CrayolaTheTitan
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2021/07/05 18:40:20
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2021/07/05 18:51:12 (permalink)
Despite being on the compatibility list the PowerLink is NOT compatible with the 2080 Ti XC Hydro Copper...... 
post edited by CrayolaTheTitan - 2021/07/05 19:15:32

Attached Image(s)

#49
charlesborner
iCX Member
  • Total Posts : 286
  • Reward points : 0
  • Joined: 2007/07/31 11:36:52
  • Status: offline
  • Ribbons : 1
Re: EVGA PowerLink Compatibility 2021/07/06 09:20:02 (permalink)
CrayolaTheTitan
Despite being on the compatibility list the PowerLink is NOT compatible with the 2080 Ti XC Hydro Copper...... 



Where's the compatibility list you're finding that on?

https://www.evga.com/support/faq/FAQdetails.aspx?faqid=59659

Your card is 11G-P4-2389-KR, which is NOT on that list.


 
Ryzen 5950X, Alphacool Eisbaer 420mm, ASROCK Taichi Razer, NVIDIA 3070 Ti FE, 3x Samsung 980 Pro 1TB, 64GB Trident Neo Z DDR4000, Seasonic Focus GX-1000, Total Noctua Fan Swap (8x Redux NF-P14S, 2x Chromax A20), 4x10TB WD Gold in Synology 920+, Thermaltake Core X9
#50
CrayolaTheTitan
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2021/07/05 18:40:20
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2021/07/06 09:48:50 (permalink)
Under compatibility on the EVGA PowerLink product page.

It is listed as an 11G-P4-2389-BR.

(Got it as a refurb from EVGA so mine actually ends with RX.)
post edited by CrayolaTheTitan - 2021/07/06 10:03:35
#51
charlesborner
iCX Member
  • Total Posts : 286
  • Reward points : 0
  • Joined: 2007/07/31 11:36:52
  • Status: offline
  • Ribbons : 1
Re: EVGA PowerLink Compatibility 2021/07/06 14:39:39 (permalink)
CrayolaTheTitan
Under compatibility on the EVGA PowerLink product page.

It is listed as an 11G-P4-2389-BR.

(Got it as a refurb from EVGA so mine actually ends with RX.)


Unless your packaging actually has 2389-BR, you're in trouble.

If yours says "RX", it's not on the compatible list.
If EVGA goofed and gave you a different card..Well...A bit late at this juncture.  And kinda pointless for a purely cosmetic issue.


 
Ryzen 5950X, Alphacool Eisbaer 420mm, ASROCK Taichi Razer, NVIDIA 3070 Ti FE, 3x Samsung 980 Pro 1TB, 64GB Trident Neo Z DDR4000, Seasonic Focus GX-1000, Total Noctua Fan Swap (8x Redux NF-P14S, 2x Chromax A20), 4x10TB WD Gold in Synology 920+, Thermaltake Core X9
#52
Sir_Sizzle77
Superclocked Member
  • Total Posts : 131
  • Reward points : 0
  • Joined: 2021/05/07 20:25:53
  • Status: offline
  • Ribbons : 1
Re: EVGA PowerLink Compatibility 2021/07/12 19:47:13 (permalink)
charlesborner
CrayolaTheTitan
Despite being on the compatibility list the PowerLink is NOT compatible with the 2080 Ti XC Hydro Copper...... 



Where's the compatibility list you're finding that on?

https://www.evga.com/support/faq/FAQdetails.aspx?faqid=59659

Your card is 11G-P4-2389-KR, which is NOT on that list.


It would be nice if they could update this list for 3000 series.  Also confirming it works on the 3060 12GB(12G-P5-3657-KR) but definitely not the 3070 TI FTW3  (08G-P5-3797-KL). 

Elite ID referral link: F28HL0JVLHT2C0FH5QJV
 
         For referral at product registration:                                For discount at checkout:
      My Rewards Program Code: IR2IS16H62                         Associate Code: MS709K401ICWSI5   
    
Remember to upload an invoice after product registration.
#53
Governator
CLASSIFIED Member
  • Total Posts : 3103
  • Reward points : 0
  • Joined: 2008/02/04 13:29:47
  • Location: Bozeman, MT
  • Status: offline
  • Ribbons : 3
Re: EVGA PowerLink Compatibility 2021/07/15 16:38:05 (permalink)
I like the concept but after reading many posts, the construction just seems a bit on the cheap side and also many complaints of fitment, since what they needed to do is build 2 versions, one for Type-A (clips on bottom) and Type-B (clips on top), surprised this never came up during development. I hope they reconsider one for the 30 series and clean up the development some.

HEATWARE
 
Mobo: Asus Z690 Maximus Extreme (BIOS 2103) | CPU: Intel Alder Lake i9-13900K (@6.2Ghz) w/EK-Quantum Velocity² D-RGB Nickel + Acetal | GPU: Evga 3080Ti FTW3 Ultra w/EKWB Quantum Vector | RAM: 64GB DDR5 (2x32GB) Kingston Fury Beast KF556C40BBK2-64 @XMP2 | SSD: 2x WD SN850 2TB NVMe (m.2_2, m.2_3) | Power Supply: EVGA SuperNOVA 1600 P2 | Cooling: Dual Loop 2x EK-Quantum Kinetic TBE 300 D5 PWM D-RGB - Plexi  / HWL 420GTS/Corsair XR5 420 Rads | Case: Corsair 7000D Airflow | OS: Microsoft Windows 11 Pro 64 Bit | Monitor: ROG Strix XG438Q | KB: CORSAIR K100 RGB Optical-Mechanical | Sound: Onboard Realtek via SPDIF (Logitech Z625 THX)

#54
the_Scarlet_one
formerly Scarlet-tech
  • Total Posts : 24581
  • Reward points : 0
  • Joined: 2013/11/13 02:48:57
  • Location: East Coast
  • Status: offline
  • Ribbons : 79
Re: EVGA PowerLink Compatibility 2021/07/16 02:37:38 (permalink)
Governator
I like the concept but after reading many posts, the construction just seems a bit on the cheap side and also many complaints of fitment, since what they needed to do is build 2 versions, one for Type-A (clips on bottom) and Type-B (clips on top), surprised this never came up during development. I hope they reconsider one for the 30 series and clean up the development some.


EVGA only has clips facing one way, and EVGA created a piece of hardware for their own products, so why would they make it compatible to other companies? That should be on the other companies to make their own.


TSgt Matthew Schwartz  SrA Bryan Bell A1C Matthew Seidler SSgt Joseph Fankhauser
#55
darklord2021a
New Member
  • Total Posts : 99
  • Reward points : 0
  • Joined: 2021/08/31 14:34:44
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink Compatibility 2021/08/31 19:10:17 (permalink)
I hope there will be new power link for the new 30 series card which would help with cable management.
#56
Dsfyu
New Member
  • Total Posts : 44
  • Reward points : 0
  • Joined: 2021/05/04 12:10:56
  • Status: offline
  • Ribbons : 1
Re: EVGA PowerLink Compatibility 2021/10/13 12:19:27 (permalink)
While the powerlink may not be compatible with 30 series EVGA GPUs, it funnily enough does fit on 6000 series AMD GPUs.

PSU: EVGA SuperNOVA 1600 T2
MB: EVGA Z790 CLASSIFIED
CPU: Intel Core i7-13700K
CPU Cooler: EVGA CLC 280mm
Memory: G.Skill 64 GB (4x16) DDR5 6000 F5-6000J3636F16GX2-TZ5RK
Monitor: Samsung G9 + 3x Dell U2419H
GPU: AMD Reference 7900 XTX
Sound Card: EVGA NU Audio
Case: Phanteks G500A White
OS: Windows 11 Pro
Keyboard: EVGA Z15
Mouse: Logitech G502 Hero

#57
Page: < 12 Showing page 2 of 2
Jump to:
  • Back to Mobile