EVGA
Prev Thread
Next Thread

First time OC 980ti Classified

Author
Post
Essentials Only Full Version
RickJamesBish
SSC Member
  • Total Posts : 580
  • Reward points : 0
  • Joined: 9/3/2010
  • Status: offline
  • Ribbons : 3
Saturday, April 02, 2016 3:06 PM (permalink)
Just installed my 980ti Classified. I have PrecisionX installed and want to make sure Im approaching this correctly. I just want to see how far my card will OC.
Im assuming I use the 2 offset settings but unsure as to what increments to go, if I take them up together or separately, etc ?  Should I increase voltage in increments along with offsets or just go up to a particular value right off and if so how much ?  
#1

3 Replies Related Threads
    Madmaxneo
    New Member
    • Total Posts : 43
    • Reward points : 0
    • Joined: 1/8/2014
    • Status: offline
    • Ribbons : 0
    Re: First time OC 980ti Classified Saturday, April 02, 2016 7:35 PM (permalink)
    I would strongly recommend MSI Afterburner. It does the same things with the same limitations but it is more stable and works better overall. I have even seen EVGA people recommend this over Precision X.
    #2
    RickJamesBish
    SSC Member
    • Total Posts : 580
    • Reward points : 0
    • Joined: 9/3/2010
    • Status: offline
    • Ribbons : 3
    Re: First time OC 980ti Classified Monday, April 04, 2016 10:37 PM (permalink)
    I may have to go that route. I just enabled fan curves through Precision X an chose the aggressive setting. The ramped up slightly at about 70 and then either it turned off or went way low to where I could not hear it. Got to 82 and still no fan, even though curve is set to 90 or 100 for that temp.
    #3
    Starman97
    New Member
    • Total Posts : 1
    • Reward points : 0
    • Joined: 3/18/2008
    • Status: offline
    • Ribbons : 0
    Re: First time OC 980ti Classified Saturday, April 23, 2016 1:56 AM (permalink)
    hmm, PrecsionX 5.3.11 is not doing anything for my new 0998 980Ti, says my pixel clk is 153mhz and wont let me change it.
    at least I can turn the fans up, they were barely turning before.
     
    Win10 - 64 
    Ti980 Classified
    gtx 670 SS , (Physx and 2nd monitor)
     
     
    #4
    Home » All Forums » [Graphics Cards] » EVGA Precision X1 » First time OC 980ti Classified
    Jump to: