EVGA
Prev Thread
Next Thread

Getting display on bios 2 and 3 but not on bios 1

Author
Post
Essentials Only Full Version
matchfan
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 10/19/2010
  • Status: offline
  • Ribbons : 0
Monday, February 04, 2013 1:35 AM (permalink)
BIOS 2 and 3 work fine for me. However, BIOS 1 has no display. I know that it boots though because I have watched the post codes when I start the computer. I hit delete and can tell that it goes into the bios setup and I can exit it by hitting escape and enter. It then presumably loads Windows and the cpu temp shows on the MB.
 
Any ideas on why there is no display?

EVGA Z77 FTW
i7 3770k w/ Noctua NH-D14
G.Skill Ripjaws X 16GB 1866
EVGA GTX670 SLI
EVGA SuperNova 750G
CM Storm Trooper w/ AeroCool Shark Blue LEDs
Corsair Force3 240GB SSD
OCZ Agility2 240GB SSD RAID0
Seagate Baracuda 7200 2TB HDD x2
LITE-ON Blu-ray Burner
#1

1 Reply Related Threads
    buggyruth
    FTW Member
    • Total Posts : 1080
    • Reward points : 0
    • Joined: 8/29/2011
    • Status: offline
    • Ribbons : 3
    Re:Getting display on bios 2 and 3 but not on bios 1 Tuesday, February 05, 2013 1:07 AM (permalink)
    Try shutting down PC & holding the reset button in for 10 seconds should set that bios to default settings. Possibly a setting is off on that particular bios that is not allowing display!

    +1 If you like my Mods-Rig
    http://www.heatware.com/eval.php?id=78759
    COOLER MASTER HAF X RC-942-KKN1 / EVGA Z77-FTW / Intel I7-3770K  / 2 X Corsair Force Series GT 240GB. SSD Raid-0 / Western Digital Caviar Black WD2002FAEX / G.SKILL Trident X Series F3-2400C10D-16GTX  / 2 X EVGA GeForce GTX 670-FTW+4GB. (04G-P4-3673-KR) with EK GeForce 680 GTX VGA Liquid Cooling Blocks - Acetal CSQ (EK-FC680 GTX - Acetal CSQ) / Swiftech Maelstrom 51/4" dual bay reservoir with dual MCP35X pumps / RayStorm CPU WaterBlock (Intel) Copper / XSPC RX360 Rad  & XSPC EX140
    #2
    Home » All Forums » [EVGA Motherboards] » All Other EVGA Motherboards » Getting display on bios 2 and 3 but not on bios 1
    Jump to: