EVGA
Prev Thread
Next Thread

Reflash bios for oc

Author
Post
Essentials Only Full Version
nexgroup23
New Member
  • Total Posts : 39
  • Reward points : 0
  • Joined: 7/30/2012
  • Status: offline
  • Ribbons : 0
Thursday, August 02, 2012 2:32 PM (permalink)
Hello
Lately I was playing around with memory timings (no ram oc or cpu oc). Today I was checking out the "Quick OC Guide" from Jakob. I started to oc my cpu like the guide explains. When i hit save and exit the bios the pc didn't post, even clear cmos didn't work. So I switched to bios 2 (1.02) to post and boot from usb then I switched back to bios 1 and reflashed bios 1 (to 1.07 beta). I went back in to the bios and set the oc again (4.6 GHz). Now I can post and I ran some stresstest. WEIRD.... I set everything like before and now it works... I guess fooling around with memspeed corrupted the bios...
post edited by nexgroup23 - Thursday, August 02, 2012 2:35 PM
#1

2 Replies Related Threads
    feniks
    CLASSIFIED Member
    • Total Posts : 3994
    • Reward points : 0
    • Joined: 8/3/2008
    • Location: NYC
    • Status: offline
    • Ribbons : 38
    Re:Reflash bios for oc Thursday, August 02, 2012 3:30 PM (permalink)
    same here, sometimes the 1.07 BIOS gets stuck and won't post at formerly known good settings.
     
    any chance you remember which POST code it was halting on? I was oc'ing memory so mine were sooner or later ending up with a POST code 23 lockup and on at least 1 occasion the memory settings were still corrupted even after a full CMOS reset (had to reflash).
    post edited by feniks - Thursday, August 02, 2012 3:34 PM

    #2
    nexgroup23
    New Member
    • Total Posts : 39
    • Reward points : 0
    • Joined: 7/30/2012
    • Status: offline
    • Ribbons : 0
    Re:Reflash bios for oc Thursday, August 02, 2012 3:48 PM (permalink)
    Unfortunately I don't remember... if it gets stuck again I will post the POST code.
    #3
    Home » All Forums » [EVGA Motherboards] » All Other EVGA Motherboards » Reflash bios for oc
    Jump to: