jeffsteeves1
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2012/07/19 14:23:08
- Status: offline
- Ribbons : 0
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/04/25 10:58:13
(permalink)
got this from evga.
-hey guys, trying to find information on thermal pads for this, are the memory pads really 2.25mm? all i can find on forum is 3070 ti xc3 info and i'm not sure they are the same and i dont trust redit lol
thanks for your time
Your AnswerHello,
Thank you for reaching out. Yes, that is the case. Memory will be 2.25mm. If you have any further questions or concerns, please feel free to reach out again.
Regards,
EVGA
i did not ask but i think vrm is 1.5mm(its so thin you should not be able to rip or destroy it but if your bored replace it. and the choke?(part with putty on it) i think is 1mm. when i'm not lazy i'l actually get the feeler gauge out and measure the whole card and report back, in theory you could use thinner thermal pads as long as you dont let them dry out cause they shrink, i think manufacture accounts for shrinkage but also not 100% sure.
found last night the stock pads are 3-4 wpmk? can anyone confirm this?
putting pads on the coils would also reduce coil whine slightly but might negatively effect thermals but i doubt it would be noticeable -i have done this with power supplies in the past and an old pentium p4pex motherboard-it had a real bad coil and now its silent, my card is quiet for now but i seen some people complain about it.
|
jeffsteeves1
New Member
- Total Posts : 7
- Reward points : 0
- Joined: 2012/07/19 14:23:08
- Status: offline
- Ribbons : 0
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/04/25 11:04:13
(permalink)
i reached out to kritical pads-
On Mon, 25 Apr 2022 12:48:07
hello, are available in canada or do you ship to canada? seen some on amazon for almost 90$ thats too much
thanks.
-
You can order it directly from our site. The shipping to Canada should be about $12.
Alternately, we do intend to send some to Amazon.ca, but it will take a few weeks to show as available there. If you are not in a rush, this would be the most affordable option for you.
Best,
--KP team
-so dont buy the scalper pads on amazon if you are in canada.
|
pawpaw78
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2021/07/09 15:45:16
- Status: offline
- Ribbons : 0
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/05/14 02:09:22
(permalink)
Sorry for the thread dig. But did the core screws have springs under them ?
|
staypuft
CLASSIFIED Member
- Total Posts : 3764
- Reward points : 0
- Joined: 2006/03/11 14:04:03
- Location: USA
- Status: offline
- Ribbons : 31
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/05/14 16:55:49
(permalink)
pawpaw78
Sorry for the thread dig. But did the core screws have springs under them ?
Yes they do.
Interested in a discount on EVGA products? Click here for details and enter this Associates code at checkout >> 2ILPLQQ8IWY8DPN 2021 Build: Gigabyte Z590 Ultra | Core i7-10700K | be quiet! Dark Rock Pro 4 | 32GB G.Skill Trident Z DDR4-3200 EVGA RTX 3080 FTW3 Ultra | Samsung 970 EVO 500GB | Seasonic Focus GX-850 | Fractal Design Meshify C | Asus TUF VG27AQL1A
|
pawpaw78
New Member
- Total Posts : 20
- Reward points : 0
- Joined: 2021/07/09 15:45:16
- Status: offline
- Ribbons : 0
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/05/14 17:03:50
(permalink)
Thank you for that. I have misplaced all my screws and trying to find new ones
|
staypuft
CLASSIFIED Member
- Total Posts : 3764
- Reward points : 0
- Joined: 2006/03/11 14:04:03
- Location: USA
- Status: offline
- Ribbons : 31
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/05/14 17:37:42
(permalink)
pawpaw78
Thank you for that. I have misplaced all my screws and trying to find new ones
I would reach out to EVGA support and ask them to provide a set. They may charge a small fee.
Interested in a discount on EVGA products? Click here for details and enter this Associates code at checkout >> 2ILPLQQ8IWY8DPN 2021 Build: Gigabyte Z590 Ultra | Core i7-10700K | be quiet! Dark Rock Pro 4 | 32GB G.Skill Trident Z DDR4-3200 EVGA RTX 3080 FTW3 Ultra | Samsung 970 EVO 500GB | Seasonic Focus GX-850 | Fractal Design Meshify C | Asus TUF VG27AQL1A
|
droomagon
Superclocked Member
- Total Posts : 104
- Reward points : 0
- Joined: 2021/06/16 05:43:53
- Status: offline
- Ribbons : 0
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/05/15 20:55:41
(permalink)
since this wasn't mentioned, what's the thermal pads thickness for those on the VRAM?
|
staypuft
CLASSIFIED Member
- Total Posts : 3764
- Reward points : 0
- Joined: 2006/03/11 14:04:03
- Location: USA
- Status: offline
- Ribbons : 31
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/05/16 18:25:49
(permalink)
droomagon
since this wasn't mentioned, what's the thermal pads thickness for those on the VRAM?
2.25mm
Interested in a discount on EVGA products? Click here for details and enter this Associates code at checkout >> 2ILPLQQ8IWY8DPN 2021 Build: Gigabyte Z590 Ultra | Core i7-10700K | be quiet! Dark Rock Pro 4 | 32GB G.Skill Trident Z DDR4-3200 EVGA RTX 3080 FTW3 Ultra | Samsung 970 EVO 500GB | Seasonic Focus GX-850 | Fractal Design Meshify C | Asus TUF VG27AQL1A
|
jlmcorri
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2022/05/25 12:38:20
- Status: offline
- Ribbons : 0
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/05/26 18:37:49
(permalink)
According to an EVGA representative, it costs 15 USD for stock pads. For the dimensions they are as follows:
65 mm x 4.5 mm x 2.25 mm
42 mm x 14 mm x 2.25 mm
40 mm x 14 mm x 2.25 mm
27 mm x 14 mm x 2.25 mm
They are nearly identical to the dimensions specified by staypuft. I will assume that all other dimensions are good as well. Better to be conservative in the dimensionality with the exception to the thickness.
|
foetopsy
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2022/11/15 04:50:18
- Status: offline
- Ribbons : 0
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/11/15 04:59:28
(permalink)
snowleo
What is the Stuff I Marked in this Picture and could you replace it with a Thermalpad ?
dried up completely after not much use for 8 months, like the thermal paste on the stone chip, I want to warn you to put a 1mm gasket, it's very thick, put 0.5mm just right! sorry for my bad english
|
foetopsy
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2022/11/15 04:50:18
- Status: offline
- Ribbons : 0
Re: EVGA RTX 3070Ti XC3 Ultra 3785 Teardown Disassembly - PCB Photos
2022/11/15 05:08:39
(permalink)
snowleo
I just talked to EVGA on the phone and they are fine with it if you replace the Putty with a Thermal Pad.
0,5mm
I think they preferred paste because of the ease of application, a thin pad is difficult to put on properly
|