EVGA

EVGA Pro SLI Bridges!

Page: << < ..1617181920.. > >> Showing page 16 of 31
Author
Post
Essentials Only Full Version
R3YOWN$_ROG
New Member
  • Total Posts : 60
  • Reward points : 0
  • Joined: 2013/09/29 20:12:08
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 08:02:49 (permalink)
PointMan3763
What SLI bridge will fit two GTX 780's on a sabertooth z87 board? Help a noob out =]




It should be the one that says 2 way SLI. 

P/N: 100-2W-0021-LR

 
 
 
post edited by R3YOWN$_ROG - 2013/10/17 08:05:04


#451
PointMan3763
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2013/07/20 15:16:52
  • Location: Miami, FL
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 08:55:03 (permalink)
Thought it was also but on my board layout it looks like two slot spacing to me. I think the 3-way/2-way was the actual one to use. Can anyone with that board (tuff series z87) confirm this please?

i7 4770K @ 4.7GHz | Corsair H100i | Corsair 16GB Vengeance Pro 1866MHz | EVGA GTX 780 SLI | Asus Sabertooth Z87 MB | Samsung 840 Pro 128G SSD | WD Black 2TB | Sound Blaster Z |Corsair AX 850W | Corsair 600T SE Case | Win 7 Pro 64-bit | Three Asus vg248qe Monitors
#452
Sniper
Superclocked Member
  • Total Posts : 195
  • Reward points : 0
  • Joined: 2007/07/31 00:36:26
  • Location: New Mexico - Affiliate Code = PLUSLCMHL8
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 08:59:27 (permalink)
ETA on when the 2/3 way sli pro bridges will be available?

Motherboard: EVGA Z690 Classified CPU: I9 13900K Ram: DOM Platinum 32gb 5200Mhz DDR5 GPU: SAPPHIRE 7900 XTX Nitro+ (Wish I could get a 4xxx EVGA card) PSU: EVGA 1300 G2 HDD:  1tb Samsung 980 Pro M.2
                                             
 

#453
Dave Ord
New Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2013/06/29 10:41:47
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 09:44:39 (permalink)
R3YOWN$_ROG
So does the L.E.D light work on the GTX 760 card ? I just bought 2 EVGA 760 GTX cards and was hoping this would work with the cards ?


I'm not sure it does check this out at the bottom of the page, it does not mention the GTX760
http://www.evga.com/articles/00766/
post edited by Dave Ord - 2013/10/17 09:50:23
#454
Dave Ord
New Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2013/06/29 10:41:47
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 09:47:17 (permalink)
Sniper
ETA on when the 2/3 way sli pro bridges will be available?




They are available on FrozenCPU.com they are fast and reliable company I have had no probs with them at all.
post edited by Dave Ord - 2013/10/17 09:49:49
#455
Sniper
Superclocked Member
  • Total Posts : 195
  • Reward points : 0
  • Joined: 2007/07/31 00:36:26
  • Location: New Mexico - Affiliate Code = PLUSLCMHL8
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 09:51:40 (permalink)
Dave Ord
 
They are available on FrozenCPU.com they are fast and reliable company I have had no probs with them at all.




Perfect. Just ordered one!

Motherboard: EVGA Z690 Classified CPU: I9 13900K Ram: DOM Platinum 32gb 5200Mhz DDR5 GPU: SAPPHIRE 7900 XTX Nitro+ (Wish I could get a 4xxx EVGA card) PSU: EVGA 1300 G2 HDD:  1tb Samsung 980 Pro M.2
                                             
 

#456
Dave Ord
New Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2013/06/29 10:41:47
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 09:56:04 (permalink)
Nice one Sniper.
Mine arrived today after crossing the Atlantic and it was bang on time and no probs.
#457
PointMan3763
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2013/07/20 15:16:52
  • Location: Miami, FL
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 10:07:58 (permalink)
Dave do you know the spacing setup on a sabertooth z87 SLI bridge? If its one space or two? Want to order the bridge now and need to be sure. Thanks =]

i7 4770K @ 4.7GHz | Corsair H100i | Corsair 16GB Vengeance Pro 1866MHz | EVGA GTX 780 SLI | Asus Sabertooth Z87 MB | Samsung 840 Pro 128G SSD | WD Black 2TB | Sound Blaster Z |Corsair AX 850W | Corsair 600T SE Case | Win 7 Pro 64-bit | Three Asus vg248qe Monitors
#458
Sniper
Superclocked Member
  • Total Posts : 195
  • Reward points : 0
  • Joined: 2007/07/31 00:36:26
  • Location: New Mexico - Affiliate Code = PLUSLCMHL8
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 10:08:14 (permalink)
Thanks! Mine should be here sometime next week. 

Motherboard: EVGA Z690 Classified CPU: I9 13900K Ram: DOM Platinum 32gb 5200Mhz DDR5 GPU: SAPPHIRE 7900 XTX Nitro+ (Wish I could get a 4xxx EVGA card) PSU: EVGA 1300 G2 HDD:  1tb Samsung 980 Pro M.2
                                             
 

#459
Sniper
Superclocked Member
  • Total Posts : 195
  • Reward points : 0
  • Joined: 2007/07/31 00:36:26
  • Location: New Mexico - Affiliate Code = PLUSLCMHL8
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 10:14:14 (permalink)
PointMan3763
Dave do you know the spacing setup on a sabertooth z87 SLI bridge? If its one space or two? Want to order the bridge now and need to be sure. Thanks =]





It looks like they are 7cm (2.7in) apart. The pro sli bridges finger spacing is 6cm (2.3in) apart. So it doesnt look like it will work. 
post edited by Sniper - 2013/10/17 10:17:07

Motherboard: EVGA Z690 Classified CPU: I9 13900K Ram: DOM Platinum 32gb 5200Mhz DDR5 GPU: SAPPHIRE 7900 XTX Nitro+ (Wish I could get a 4xxx EVGA card) PSU: EVGA 1300 G2 HDD:  1tb Samsung 980 Pro M.2
                                             
 

#460
PointMan3763
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2013/07/20 15:16:52
  • Location: Miami, FL
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 10:24:23 (permalink)
Forgive the noobness in me.....So no SLI bridge will work with my board?
 

i7 4770K @ 4.7GHz | Corsair H100i | Corsair 16GB Vengeance Pro 1866MHz | EVGA GTX 780 SLI | Asus Sabertooth Z87 MB | Samsung 840 Pro 128G SSD | WD Black 2TB | Sound Blaster Z |Corsair AX 850W | Corsair 600T SE Case | Win 7 Pro 64-bit | Three Asus vg248qe Monitors
#461
Sniper
Superclocked Member
  • Total Posts : 195
  • Reward points : 0
  • Joined: 2007/07/31 00:36:26
  • Location: New Mexico - Affiliate Code = PLUSLCMHL8
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 13:05:01 (permalink)
PointMan3763
Forgive the noobness in me.....So no SLI bridge will work with my board?
 


The board will come with a SLI bridge that will fit. I was just referring to the EVGA Pro Sli bridges not being able fit that board. 

Motherboard: EVGA Z690 Classified CPU: I9 13900K Ram: DOM Platinum 32gb 5200Mhz DDR5 GPU: SAPPHIRE 7900 XTX Nitro+ (Wish I could get a 4xxx EVGA card) PSU: EVGA 1300 G2 HDD:  1tb Samsung 980 Pro M.2
                                             
 

#462
PointMan3763
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2013/07/20 15:16:52
  • Location: Miami, FL
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 13:18:59 (permalink)
Got it. Iam using the bridge that came with the board now just wanted to bling it out abit. Cant seem to find anything else on a nice looking bridge to enhance the look of my rig.
 

i7 4770K @ 4.7GHz | Corsair H100i | Corsair 16GB Vengeance Pro 1866MHz | EVGA GTX 780 SLI | Asus Sabertooth Z87 MB | Samsung 840 Pro 128G SSD | WD Black 2TB | Sound Blaster Z |Corsair AX 850W | Corsair 600T SE Case | Win 7 Pro 64-bit | Three Asus vg248qe Monitors
#463
whitie63
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2009/10/23 06:56:06
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/17 16:38:11 (permalink)
Does not work with   EVGA 04G-P4-3768-KR GeForce GTX 760 FTW And yes I do have the right driver installed 

#464
Dave Ord
New Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2013/06/29 10:41:47
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/18 05:44:23 (permalink)
PointMan3763
Dave do you know the spacing setup on a sabertooth z87 SLI bridge? If its one space or two? Want to order the bridge now and need to be sure. Thanks =]


Your board has a two slot spacing so a 2way/3way could fit and I say could.
Firstly measure from the fingers on 1st card to the fingers on your 2nd card it should 80 cm
Make sure your system is powered off first, unless your using a plastic ruler.
post edited by Dave Ord - 2013/10/18 05:59:04
#465
Dave Ord
New Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2013/06/29 10:41:47
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/18 05:52:24 (permalink)
whitie63
Does not work with   EVGA 04G-P4-3768-KR GeForce GTX 760 FTW And yes I do have the right driver installed 





It's nothing to do with  drivers.
The cards your using do not support the circuitry. It Only works on Titan, 780, and select 770's
There is no mention of the  760s
Read it here http://www.evga.com/articles/00766/ at the bottom of the page.
post edited by Dave Ord - 2013/10/18 05:54:26
#466
PointMan3763
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2013/07/20 15:16:52
  • Location: Miami, FL
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/18 06:34:47 (permalink)
Thank you so much Sniper for the PM, you made my day!!!!! =] Just ordered the SLI bridge and the backplates for the 780's.
Thanks again!!!
And Thank you Dave for the input on the bridge =]
post edited by PointMan3763 - 2013/10/18 06:41:52

i7 4770K @ 4.7GHz | Corsair H100i | Corsair 16GB Vengeance Pro 1866MHz | EVGA GTX 780 SLI | Asus Sabertooth Z87 MB | Samsung 840 Pro 128G SSD | WD Black 2TB | Sound Blaster Z |Corsair AX 850W | Corsair 600T SE Case | Win 7 Pro 64-bit | Three Asus vg248qe Monitors
#467
xXwiL_i_AmXx
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2013/04/22 13:25:59
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/19 06:23:44 (permalink)
@ PointMan3763
 
FYI, I have the Sabertooth Z87 and the 2-way Pro SLI bridge, it WILL fit.  It has a single-slot spacing; spacing between the SLI fingers is approximately 65 mm, but it will fit appropriately without having to force anything into place.  I can't say the same thing for the 2/3-way Pro SLI bridge, but the 2-way will most definitely.  Hope this helps!
#468
whitie63
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2009/10/23 06:56:06
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/19 12:32:17 (permalink)
Ok got mine to light up with my 760's 

 

#469
PointMan3763
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2013/07/20 15:16:52
  • Location: Miami, FL
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/19 13:29:35 (permalink)
sweet thanks will just ordered it should be here by Monday. also if I get another bridge to cover the other side will that mess up the cards having two sli bridges? I know its just for looks is what im going for...=]

i7 4770K @ 4.7GHz | Corsair H100i | Corsair 16GB Vengeance Pro 1866MHz | EVGA GTX 780 SLI | Asus Sabertooth Z87 MB | Samsung 840 Pro 128G SSD | WD Black 2TB | Sound Blaster Z |Corsair AX 850W | Corsair 600T SE Case | Win 7 Pro 64-bit | Three Asus vg248qe Monitors
#470
chomuco
New Member
  • Total Posts : 9
  • Reward points : 0
  • Joined: 2013/10/16 18:47:35
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/19 16:36:03 (permalink)

cual lleva p sli ?? puente 
 
post edited by chomuco - 2013/10/19 16:40:01

#471
Dave Ord
New Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2013/06/29 10:41:47
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/19 17:46:23 (permalink)
whitie63
Ok got mine to light up with my 760's 

 



Well good man you how did you manage it?
post edited by Dave Ord - 2013/10/19 17:54:37
#472
Dave Ord
New Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2013/06/29 10:41:47
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/19 17:52:01 (permalink)
PointMan3763
sweet thanks will just ordered it should be here by Monday. also if I get another bridge to cover the other side will that mess up the cards having two sli bridges? I know its just for looks is what im going for...=]


you can use two bridges side by side but I thought the 2/3 way would work on your board though covering the four fingers. 
#473
whitie63
New Member
  • Total Posts : 10
  • Reward points : 0
  • Joined: 2009/10/23 06:56:06
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/19 18:20:36 (permalink)
Dave Ord
whitie63
Ok got mine to light up with my 760's 

 



Well good man you how did you manage it?

 
 
LOL with a little modding if you look real close now there is a sleeved wire  coming out of it that i hooked up to a small strip led like this one with sticky on the back 
 

just grabbed a molex connector ran some sleeved wire to it and  Vooooila and it is something I can remove with out damage to the bridge  
 
#474
xXwiL_i_AmXx
New Member
  • Total Posts : 2
  • Reward points : 0
  • Joined: 2013/04/22 13:25:59
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/20 01:02:12 (permalink)
Dave Ord
PointMan3763
sweet thanks will just ordered it should be here by Monday. also if I get another bridge to cover the other side will that mess up the cards having two sli bridges? I know its just for looks is what im going for...=]


you can use two bridges side by side but I thought the 2/3 way would work on your board though covering the four fingers. 


The only reason why I think the 2/3-way SLI bridge may not properly fit the Sabertooth Z87 is because if you refer to the first page, the 3-Way SLI bridge can accommodate 2-Way with DUAL slot spacing where the SLI fingers are 80 mm apart.  Like I mentioned above, the spacing between the SLI fingers on the Sabertooth Z87 is about 65 mm apart, which isn't too far off from 60 mm (the distance between SLI fingers with the 2-way SLI bridge).  80 mm is much longer than 60 or 65 mm, which is why I don't think the 2/3-way bridge will fit.  Of course, I could be wrong unless someone is willing to try it out and confirm it as I do like the wider 3-way SLI bridge and still hoping EVGA comes out with a double wide 2-way bridge lol. 
#475
Dave Ord
New Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2013/06/29 10:41:47
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/20 02:20:22 (permalink)
whitie63
Dave Ord
whitie63
Ok got mine to light up with my 760's 

 



Well good man you how did you manage it?

 
 
LOL with a little modding if you look real close now there is a sleeved wire  coming out of it that i hooked up to a small strip led like this one with sticky on the back 
 

just grabbed a molex connector ran some sleeved wire to it and  Vooooila and it is something I can remove with out damage to the bridge  
 



Where there's a will, there's a way. Congrats on your modding It looks great m8
There was a mention in an earlier post on doing it that way for cards that do not have the circuitry in their cards.
And you have proved it works well done 
#476
raw2dogmeat
SSC Member
  • Total Posts : 799
  • Reward points : 0
  • Joined: 2008/11/01 17:15:00
  • Status: offline
  • Ribbons : 7
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/20 06:18:32 (permalink)
I didn't see this thread before I posted in Modsrigs. Just a thought for those that don't own the 700 series: Link

Cooler Master Cosmos S
I7 4930K @ 4.4 GHz
Asus Rampage IV Black  
4 x 4 gb G.SKill - 2133  9-11-10-28-2T
Corsair 1200w
Sandisk Extreme II 240 gb (Windows 7, 64 bit) 
Velociraptor 1 tb  (games) 
980 Ti SLI
XSPC Raystorm - XSPC Razer - EK Rampage IV Black Edition blocks
 
#477
Dave Ord
New Member
  • Total Posts : 33
  • Reward points : 0
  • Joined: 2013/06/29 10:41:47
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/20 08:35:07 (permalink)
raw2dogmeat
I didn't see this thread before I posted in Modsrigs. Just a thought for those that don't own the 700 series: Link




Well done raw2dogmeat I am sure it was your post I read
#478
VENOMVETTE
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2013/10/07 12:28:58
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/20 11:06:14 (permalink)
Have a GIGABYTE GA-G1.Sniper M5 LGA 1150 Intel Z87 SATA 6Gb/s uATX Intel Motherboard and the EVGA 02G-P4-3765-KR GeForce GTX 760 2GB 256-bit GDDR5 PCI Express 3.0 in 2 way sli can i get the EVGA Pro SLI Bridge (3-Way/2-Way) for up grades later on?
 
thank you
#479
dxtremefx
New Member
  • Total Posts : 25
  • Reward points : 0
  • Joined: 2007/10/27 08:46:41
  • Location: Glendale, AZ
  • Status: offline
  • Ribbons : 0
Re:EVGA Pro SLI Bridges + Giveaway! 2013/10/20 19:14:25 (permalink)


  
My Rig:
*Intel Core i7-4770K Haswell 4.4GHz LGA 1150
*ASRock Z87 Extreme9/ac LGA 1150 Intel Z87 Motherboard
*AVEXIR Core Series 32GB Kit (4 x 8GB) Quad Channel 240-pin DDR3 SDRAM DDR3 2400 (PC3 19200)
*2x'sEVGA ACX Cooler 03G-P4-2784-KR GeForce GTX 780 3GB 384-bit GDDR5 PCI Express 3.0
*CORSAIR Hydro Series H100i Water Cooler
*2x'sCorsair Neutron Series GTX CSSD-N480GBGTXB-BK 2.5" 480GB SATA III MLC Internal Solid State Drive in Raid 0
*Corsair AX1200i PSU
*Corsair Obsidian 900D Super Tower
 
#480
Page: << < ..1617181920.. > >> Showing page 16 of 31
Jump to:
  • Back to Mobile