EVGA

Hot!EVGA Precision X1 1.3.5.0

Author
EVGATech_LeeM
EVGA Forum Moderator
  • Total Posts : 3680
  • Reward points : 0
  • Joined: 2016/11/04 14:43:35
  • Location: Brea, CA
  • Status: online
  • Ribbons : 14
2022/06/28 14:28:20 (permalink)
Release: 6/28/2022  -  This release updates PX1 for PowerLink and LED support for 3090 Ti cards.
 
Note - To reduce potential MCU/BIOS flashing issues, please disable "Fast Boot" in your motherboard BIOS before changing cards or flashing to a different BIOS.  Just a PSA....
 
  • Adds support for PowerLink LED with EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3
  • Adds support for EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3 HYBRID Fan LED
 
 
https://www.evga.com/precisionx1/
Please let us know if you run into any issues.
#1

8 Replies Related Threads

    Mzfhartge
    New Member
    • Total Posts : 4
    • Reward points : 0
    • Joined: 2022/05/12 22:53:27
    • Status: offline
    • Ribbons : 3
    Re: EVGA Precision X1 1.3.5.0 2022/06/28 18:50:26 (permalink)
    Just updated Precision to the latest version and installed the new led software. After installation was done, it updated the firmware of the card.
    When firmware was updating, the GPU made a loud screeching noise and two little red light were on while side led panel was off.
    The lights after that were not the same as before since when I had it on breathing. Now it shows flickering instead.
    Rainbow effect is fine just not the others. I rebooted the pc to see if it would fix it but instead I got a blue screen.
    Went into bios and reset it. now Pc boots but lights flickers white.
     
    Update: The lights are working fine now, I had to change the led number under led which belongs to Powerlink 41s and everything went normal.
    Now the question is it normal to make a high pitch sound when it updated the firmware and why I got a BSOD?
    GPU: 3090TI FTW3 ULTRA
    Driver: 516.59
    Bios: 94.02.A0.00.ED
    Firmware: 50.01.08
    post edited by Mzfhartge - 2022/06/28 19:17:18
    #2
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 28647
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 120
    Re: EVGA Precision X1 1.3.5.0 2022/06/28 19:28:46 (permalink)
    cool, I'll have to test this

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members I am a Volunteer Moderator not an EVGA employee
    RTX Project EVGA X99 FTWK 2xEVGA2080Ti EVGA1200P2  Nibbler EVGA X99 Classified EVGA 3080Ti FTW3 Ultra 1600P2
    Save $$$ @EVGA.com use ANYONE's Associate code @ checkout --> Even if your an Associate You can SAVE (on most items) 3% - 10% Depends on item

    #3
    zippytek
    SSC Member
    • Total Posts : 885
    • Reward points : 0
    • Joined: 2020/10/06 17:25:35
    • Status: offline
    • Ribbons : 5
    Re: EVGA Precision X1 1.3.5.0 2022/06/29 05:33:10 (permalink)
    EVGATech_LeeM
    Release: 6/28/2022  -  This release updates PX1 for PowerLink and LED support for 3090 Ti cards.

    Note - To reduce potential MCU/BIOS flashing issues, please disable "Fast Boot" in your motherboard BIOS before changing cards or flashing to a different BIOS.  Just a PSA....
    • Adds support for PowerLink LED with EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3
    • Adds support for EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3 HYBRID Fan LED
     

    https://www.evga.com/precisionx1/
    Please let us know if you run into any issues.




    does this imply y'all *will* be releasing a powerlink that supports 2x 12VHPWR connectors on the 3090 Ti KPE? thank you
    #4
    EVGATech_LeeM
    EVGA Forum Moderator
    • Total Posts : 3680
    • Reward points : 0
    • Joined: 2016/11/04 14:43:35
    • Location: Brea, CA
    • Status: online
    • Ribbons : 14
    Re: EVGA Precision X1 1.3.5.0 2022/06/29 10:05:35 (permalink)
    zippytek
    EVGATech_LeeM
    Release: 6/28/2022  -  This release updates PX1 for PowerLink and LED support for 3090 Ti cards.

    Note - To reduce potential MCU/BIOS flashing issues, please disable "Fast Boot" in your motherboard BIOS before changing cards or flashing to a different BIOS.  Just a PSA....
    • Adds support for PowerLink LED with EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3
    • Adds support for EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3 HYBRID Fan LED
     

    https://www.evga.com/precisionx1/
    Please let us know if you run into any issues.




    does this imply y'all *will* be releasing a powerlink that supports 2x 12VHPWR connectors on the 3090 Ti KPE? thank you


    That's a great question.
    #5
    kingpinamar
    New Member
    • Total Posts : 18
    • Reward points : 0
    • Joined: 2022/07/01 13:10:25
    • Status: offline
    • Ribbons : 0
    Re: EVGA Precision X1 1.3.5.0 2022/07/01 16:47:45 (permalink)
    Also wondering
    #6
    getalife
    New Member
    • Total Posts : 39
    • Reward points : 0
    • Joined: 2015/11/25 18:20:05
    • Location: Quebec Canada
    • Status: offline
    • Ribbons : 0
    Re: EVGA Precision X1 1.3.5.0 2022/07/02 10:59:17 (permalink)
    Latest version of Precision X1 seem to have killed my EVGA 2070 RTX Will try to do advance troubleshooting to confirm.  Little update my card is ok and running fine.  
     
    Also, on my main rig, equip with a 3090, the Precision X1 is totally unstable, it close without notice and no reason.  This is still accurate moved to the new 1.36 version
     
    Here's a replication of the log
     
    -System
      -Provider   [ Name]Application Error
      -EventID1000   [ Qualifiers]0
       Version0   Level2   Task100   Opcode0   Keywords0x80000000000000  -TimeCreated   [ SystemTime]2022-07-02T17:25:07.1367664Z
       EventRecordID15887   Correlation  -Execution   [ ProcessID]16300   [ ThreadID]0
       ChannelApplication   ComputerTTBOY76   Security
    -EventData   PrecisionX_x64.exe   1.3.5.0   62bab7d9   clr.dll   4.8.4515.0   624ce98e   c0000005   0000000000002c2d   1d94   01d88e35a7acbabf   C:\Program Files\EVGA\Precision X1\PrecisionX_x64.exe   C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll   c921fe44-6d15-4803-b12c-5e37b9d5ab67        
     
    Also a Net framework ERROR V.403.30319  with error code 80131506
     
    No error on the new version, but Core clock is going crazy on  my GPU #1
     

     
     
    post edited by getalife - 2022/07/08 11:25:12

    Simply enthousiasmic about computer since 1992
    #7
    Hoggle
    EVGA Forum Moderator
    • Total Posts : 8732
    • Reward points : 0
    • Joined: 2003/10/13 22:10:45
    • Location: Eugene, OR
    • Status: offline
    • Ribbons : 4
    Re: EVGA Precision X1 1.3.5.0 2022/07/02 11:07:11 (permalink)
    zippytek
    EVGATech_LeeM
    Release: 6/28/2022  -  This release updates PX1 for PowerLink and LED support for 3090 Ti cards.

    Note - To reduce potential MCU/BIOS flashing issues, please disable "Fast Boot" in your motherboard BIOS before changing cards or flashing to a different BIOS.  Just a PSA....
    • Adds support for PowerLink LED with EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3
    • Adds support for EVGA GeForce RTX 3090 Ti K|NGP|N / FTW3 HYBRID Fan LED
     

    https://www.evga.com/precisionx1/
    Please let us know if you run into any issues.




    does this imply y'all *will* be releasing a powerlink that supports 2x 12VHPWR connectors on the 3090 Ti KPE? thank you




    Good catch but it seems likely that wasn't a mistake.

    Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
     
     
    #8
    BlackBeard
    New Member
    • Total Posts : 11
    • Reward points : 0
    • Joined: 2009/08/31 14:30:19
    • Status: offline
    • Ribbons : 0
    Re: EVGA Precision X1 1.3.5.0 2022/07/03 12:37:32 (permalink)
    I gave up on v.1.3.4.0 so I downloaded/installed v1.3.5.0 today, still certain Issues....All Fans Ramp up or down when set to Auto as defined by preset or by custom(user), where the Issue comes in is the in game FPS 22 to 30 which is abysmal compared to the 120+ in v1.3.3.0(which I reverted to again as it works).  Something I also noticed which would factor the low FPS is in v1.3.5.0 the Power was 24 and GPU Temp is 63 which they can be adjusted with the slider bars but did not do so automatically, I hope this helps narrow down a stable P X1 build.
    #9
    Jump to:
  • Back to Mobile