Honestly folks I can't believe you're surprised this beta doesn't work. EVGA is selling new hardware and once again they have dropped the ball with support.  Oh I know I am about to hear they're doing their best and it's in beta and the hardware's new.  Let's be honest here, EVGA has known what the hardware is for months, but they are not capable of writing software for Windows machines.  Obviously they do not have the right people anymore to accomplish this task. How hard is it to develop a piece of software that controls fans and overclock? Unwinder has been very successful with Afterburner for years because he understands development and support. And EVGA used to have a handle on this, but the wheels are off now.
 
I think a fair expectation would have been software ready on day one when cards started shipping.  So, here we are and the beta is another fail.  It's the same old software wrapped in a pretty gui because guess what? Precision used to be a stable reliable piece of software, but not anymore.  The outlook for Precision X is bleak and as I have said before I won't be buying anymore EVGA hardware until I see this issue resolved.
 
And where is the GTX support?  Oh sure it's coming soon. Complete with profiles that won't save and software that unloads while you're gaming leaving your fan controller at zero and your card at 90 degrees celcius.  A fair thing would be for one of you folks from EVGA to at least admit there's a general problem here. There's an issue with the development of Precision that is not being addressed.  Inform your users and fix the problem.

Ok so my zotac 2080ti amp run 1300rpm speed as lowest. It’s impossible to get lower than that. Fan curve worked on msi afterburner beta but the lowest rpm is 1300. This is how they set. Nvm is ok for me they work surprisingly quite and keep 30 degrees at idle. Full load I hit around 60 degrees. I manage to oc little bit and hit 24376 score in fire strike 1.1.

dsublett
Honestly folks I can't believe you're surprised this beta doesn't work. EVGA is selling new hardware and once again they have dropped the ball with support.  Oh I know I am about to hear they're doing their best and it's in beta and the hardware's new.  Let's be honest here, EVGA has known what the hardware is for months, but they are not capable of writing software for Windows machines.  Obviously they do not have the right people anymore to accomplish this task. How hard is it to develop a piece of software that controls fans and overclock? Unwinder has been very successful with Afterburner for years because he understands development and support. And EVGA used to have a handle on this, but the wheels are off now.
 
I think a fair expectation would have been software ready on day one when cards started shipping.  So, here we are and the beta is another fail.  It's the same old software wrapped in a pretty gui because guess what? Precision used to be a stable reliable piece of software, but not anymore.  The outlook for Precision X is bleak and as I have said before I won't be buying anymore EVGA hardware until I see this issue resolved.
 
And where is the GTX support?  Oh sure it's coming soon. Complete with profiles that won't save and software that unloads while you're gaming leaving your fan controller at zero and your card at 90 degrees celcius.  A fair thing would be for one of you folks from EVGA to at least admit there's a general problem here. There's an issue with the development of Precision that is not being addressed.  Inform your users and fix the problem.

dsublett
Honestly folks I can't believe you're surprised this beta doesn't work. EVGA is selling new hardware and once again they have dropped the ball with support.  Oh I know I am about to hear they're doing their best and it's in beta and the hardware's new.  Let's be honest here, EVGA has known what the hardware is for months, but they are not capable of writing software for Windows machines.  Obviously they do not have the right people anymore to accomplish this task. How hard is it to develop a piece of software that controls fans and overclock? Unwinder has been very successful with Afterburner for years because he understands development and support. And EVGA used to have a handle on this, but the wheels are off now.
 
I think a fair expectation would have been software ready on day one when cards started shipping.  So, here we are and the beta is another fail.  It's the same old software wrapped in a pretty gui because guess what? Precision used to be a stable reliable piece of software, but not anymore.  The outlook for Precision X is bleak and as I have said before I won't be buying anymore EVGA hardware until I see this issue resolved.
 
And where is the GTX support?  Oh sure it's coming soon. Complete with profiles that won't save and software that unloads while you're gaming leaving your fan controller at zero and your card at 90 degrees celcius.  A fair thing would be for one of you folks from EVGA to at least admit there's a general problem here. There's an issue with the development of Precision that is not being addressed.  Inform your users and fix the problem.

You are absolutely correct!  I have an EVGA GTX 1080 TI FTW3 Hybrid and also the 280 cooler, and both Precision and Flow are absolutely terrible, buggy software!  Suffice to say, I won't be buying another EVGA hardware product until they get their act together with software which is suppose to support it.  I actually use MSI Afterburner for OSD monitoring, CPU, GPU, RAM, etc., and it works flawless.  If I didn't need the fan control for the Hybrid I wouldn't even have Precision installed!  Thanks.

bcavnaugh

algaceburator

bcavnaugh

algaceburator
For some reason I can’t control fans on my rtx 2080ti. Whatever I set for my fans settings it just doesn’t work. My fans on idle 1300rpm and takes zero effect if I set them to 0 or anything else.

What Model of the RTX 2080 Ti ?

I use Zotac 2080TI AMP

Is the Tool that Zotac Provides Working?
Fan control (firmware) is had to manage between OEMs.

I use Beta version of msi afterburner and it works fine. I oc card slightly for now and is all perfect. The only problem all fans never go idle. They spin at lowest 1300 rpm this is how they designed. My idle temps 30 degrees. My max temps around 60 degrees and fans hit 2500rpm. As I said earlier I hit 24376 score with fire strike 1.1. I will oc more later. Since I use 2700x cpu I can’t do much hitting greatest scores. My friend after delidding hes 7920x and oc to 4.8ghz. He hits 25682 with 1080ti oc. I love 2700x is great cpu for gaming and work load but is not the best choice if you want crazy oc...

Tweaked
Gentlemen, as this thread is about Precision and not competing software, please refrain from posting off topic?

I don't think this is an appropriate response in light of what we are discussing.  We are talking about EVGA GPU software -- Precision XOC and X1.  The software doesn't work. It's appropriate to the topic. It's on topic. It's salient. Further how about you start addressing our issues instead of getting mad and searching for some obscure reason to call out our posts.  How about one of you mods admit that we are right and that the software has issues? And give us the plan that EVGA has to address these issues.

Concur!

Everything seems to be working fine in X1 for me, the OC scanner doesn't do a very good job but I was able to manually overclock and do fan control, save settings, osd works, etc. To save a profile right click on one of the number on the right side.
Still not sure I understand everything about the interface (like the purpose of the LED button on the right), but if anyone has any questions on how to use it ask and I can try to help. This video might help, covers the overclocking interface: https://www.youtube.com/watch?v=FpmDa5VetME

NEW version - just released --- > EVGA Precision X1 0.2.8 BETA (RTX Only)



https://forums.evga.com/FindPost/2861021
 
 
Locking thread as there is a New Version