EVGA

EVGA PowerLink - Power Matters!

Page: < 12 Showing page 2 of 2
Author
WILLxLOVE
New Member
  • Total Posts : 8
  • Reward points : 0
  • Joined: 2017/12/25 08:26:55
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink - Power Matters! 2019/09/26 20:24:47 (permalink)
I'd love if this was adjusted and or modded for 3 cable cards aka K|NGP|N
#31
aidolon
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2011/09/27 11:52:14
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink - Power Matters! 2019/09/26 22:47:59 (permalink)
Sajin
aidolon
 
Contact support again? Why?

EVGA is already looking into the issue for you, so you don't need to contact them again atm.


Cool GTX
Sajin
aidolon
 
Contact support again? Why?

EVGA is already looking into the issue for you, so you don't need to contact them again atm.


See Post #26 from EVGATech_LeeM


Oh, thank You, it´a nice. Maybe I have to start to complain at forum a do not waste time with common method. I hope that all be fixed and I would like to say, that simple sorry in e-mail by EVGA will be enough satisfaction for me.



#32
aidolon
New Member
  • Total Posts : 7
  • Reward points : 0
  • Joined: 2011/09/27 11:52:14
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink - Power Matters! 2019/09/27 01:00:53 (permalink)
To be honest I need to write here that I was contacted by EU EVGA support already.
#33
Hoggle
EVGA Forum Moderator
  • Total Posts : 10064
  • Reward points : 0
  • Joined: 2003/10/13 22:10:45
  • Location: Eugene, OR
  • Status: offline
  • Ribbons : 4
Re: EVGA PowerLink - Power Matters! 2019/09/27 03:29:32 (permalink)
WILLxLOVE
I'd love if this was adjusted and or modded for 3 cable cards aka K|NGP|N




It's a good idea since with the current one you are able to remove one for single cable cards.

Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
 
 
#34
EVGATech_AdamB
FTW Member
  • Total Posts : 1930
  • Reward points : 0
  • Joined: 2017/06/05 00:00:00
  • Location: Brea, CA
  • Status: offline
  • Ribbons : 4
Re: EVGA PowerLink - Power Matters! 2019/09/27 09:08:45 (permalink)
aidolon
To be honest I need to write here that I was contacted by EU EVGA support already.


Hi aidolon! Yes, you should have been contacted by a member of our EU support team about this. When I saw your forum message I reached out to our EU support team for you. Since the US and EU are in different time zones, I needed their help to coordinate everything. If you do not receive a resolution on the powerlink, please feel free to contact me and I would be happy to assist you.

Like our service? Please provide feedback for us at the link HERE
#35
MSim
Omnipotent Enthusiast
  • Total Posts : 14674
  • Reward points : 0
  • Joined: 2005/05/22 23:13:30
  • Location: Earth
  • Status: offline
  • Ribbons : 38
Re: EVGA PowerLink - Power Matters! 2019/09/29 04:22:30 (permalink)
@EVGATech_AdamB
 
Can you ask whoever did the PowerLink testing these two question.
  1. PCIE cables they used, do they have a capacitor in them?
  2. What PSU did they use?
 
Knowing if the PCIE cables evga used for powerlink testing have a capacitor in them or not. that will tell us if the difference is with/without any capacitors. It would be interesting to know what PSU was used for the testing too.
 
My EVGA 750W P2 stock PCIE cables have a capacitor in them.
My EVGA sleeved PCIE cables for the same PSU, no capacitor in them.
 
 
 
 
 
 


 
#36
MSim
Omnipotent Enthusiast
  • Total Posts : 14674
  • Reward points : 0
  • Joined: 2005/05/22 23:13:30
  • Location: Earth
  • Status: offline
  • Ribbons : 38
Re: EVGA PowerLink - Power Matters! 2019/10/02 17:00:52 (permalink)
For some reason we can't get evga to post any details about the PowerLink testing. 


 
#37
ty_ger07
Insert Custom Title Here
  • Total Posts : 21144
  • Reward points : 0
  • Joined: 2008/04/10 23:48:15
  • Location: traveler
  • Status: offline
  • Ribbons : 270
Re: EVGA PowerLink - Power Matters! 2019/10/02 17:46:26 (permalink)
MSim
For some reason we can't get evga to post any details about the PowerLink testing. 


Because the testing was purposely misleading, for marketing reasons, and the marketing information is irrelevant.
 
It's a piece of plastic with a couple of metal strips inside which relocate the power connectors.  That's it.  The capacitors do nothing relevant.  "Power Matters!" lol

ASRock Z77 • Intel Core i7 3770K • EVGA GTX 1080 • Samsung 850 Pro • Seasonic PRIME 600W Titanium
My EVGA Score: 1546 • Zero Associates Points • I don't shill

#38
Capt_Caveman
Superclocked Member
  • Total Posts : 132
  • Reward points : 0
  • Joined: 2005/12/09 14:41:35
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink - Power Matters! 2020/09/25 12:41:22 (permalink)
Have been using a Powerlink for my 1080ti FTW3 for a couple of years with no issues.  Started to lose video to my monitors and after troubleshooting discovered it to be the Powerlink and if I removed it, no issues.  so, I purchased another one and after one month the same issue.  Could it be that I just bought a bad Powerlink?  Or something else?  I'm using an EVGA SuperNova 850 G+ power supply.

AMD 5900X
EVGA 3080 FTW3
AsRock X570 Taichi / Noctua NH-U14S
G.Skill TridentZ Neo 32gb(16x2) 3600mhz CL16
Seagate Firecuda 520 2TB NVMe / Samsung 960 EVO 1TB NVMe
Corsair Crystal 570X Case
EVGA G3 850w
Soundblaster AE-5
Alienware AW3418DW and LG 27GP850-B
#39
thatguy1313
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 2021/01/21 13:12:09
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink - Power Matters! 2021/01/24 12:28:48 (permalink)
are there plans to release a 3-plug variant that i can use with my rtx3080ftw ultra?
post edited by thatguy1313 - 2021/02/05 13:44:17
#40
HeavyHemi
Insert Custom Title Here
  • Total Posts : 15662
  • Reward points : 0
  • Joined: 2008/11/28 20:31:42
  • Location: Western Washington
  • Status: offline
  • Ribbons : 135
Re: EVGA PowerLink - Power Matters! 2021/02/04 21:09:06 (permalink)
Interestingly enough, I also had to quit using the Powerlink due to stability issues. GPU-Z was reporting a voltage drop across the 6 pin input. 8 pin and PCIe power were normal under load at ~12.1v whereas the 6 pin would drop to 11.5 under a load.  Swapping around cables  and reseats made no difference. Removed, all 3 12v inputs read the same voltage under load. As to the utility of the device, it's perfectly fine as a device for making your wire management easier. It is not a device that is going to improve performance. Yes indeed there could be some minor reduction in ripple, but as was pointed if you're using a standard quality PSU, that ripple is irrelevant. You're more concerned with current and voltage stability under load which is provided by the GPU VRM, not the PSU.

EVGA X99 FTWK / i7 6850K @ 4.5ghz / RTX 3080Ti FTW Ultra / 32GB Corsair LPX 3600mhz / Samsung 850Pro 256GB / Be Quiet BN516 Straight Power 12-1000w 80 Plus Platinum / Window 10 Pro
 
#41
tattude69
iCX Member
  • Total Posts : 461
  • Reward points : 0
  • Joined: 2013/04/21 15:30:52
  • Location: NY
  • Status: offline
  • Ribbons : 5
Re: EVGA PowerLink - Power Matters! 2021/03/03 17:29:31 (permalink)
I had to remove mine due to stability issues also. Seemed to have a short life it was less then a year old. Evga was suppose to send one to me as part of the Elite program back in November but their still looking into it. So i have not had the ability to try a second yet

 
 
                           
#42
Rygar1976
New Member
  • Total Posts : 17
  • Reward points : 0
  • Joined: 2012/09/26 14:06:44
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink - Power Matters! 2021/06/02 16:24:03 (permalink)
Is there a version compatible with the 3 x 8 pin EVGA 3090 FTW3 Ultra converted to Hybrid using EVGAs hybrid 240mm kit designed for the card?

i9-10900k 5.3GHz allcore -5.1 Bus@1.39v Daily OC
 - Kraken x73 with 6 x 120 Noctua NF-F12 iPPC 3000 RPM Fans in Push-Pull
Asus z590 Maximus Hero XIII Motherboard
4 x 8GB G.Skill TridentZ 4000MHz@CL15-15-15-30
EVGA 3090 FTW3 Ultra + Hybrid Conversion:
 - Kryonaut Extreme + Fuji Poly Thermal Pads 
 - 4xNoctua NF-F12 iPPC 3000RPM Fans Push-Pull
 - 2.205GHz at 1.053v - 9.951GHz VRam Daily OC
2TB 970 Evo Plus Boot M.2
2TB Sabrent Rocket M.2
2TB WD Sata M.2
2TB 960 EVO SSD
Lian Li Dynamic XL Case
17 Total Noctua NF-F12 iPPC 120mm 3000RPM Fans
#43
PinkyGehirn
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2018/12/19 21:38:12
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink - Power Matters! 2021/06/20 16:42:07 (permalink)
Sure would make the case cable management work a lot better.
#44
Monyo
New Member
  • Total Posts : 5
  • Reward points : 0
  • Joined: 2021/06/01 07:24:35
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink - Power Matters! 2021/07/27 02:30:51 (permalink)
Powerlink for 30 series when will it be available?
#45
Hoggle
EVGA Forum Moderator
  • Total Posts : 10064
  • Reward points : 0
  • Joined: 2003/10/13 22:10:45
  • Location: Eugene, OR
  • Status: offline
  • Ribbons : 4
Re: EVGA PowerLink - Power Matters! 2021/07/27 02:47:28 (permalink)
Monyo
Powerlink for 30 series when will it be available?




So far we haven't heard anything about a 30 series Powerlink but it would be nice if it did show up.

Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
 
 
#46
cavity101
New Member
  • Total Posts : 18
  • Reward points : 0
  • Joined: 2018/06/08 18:05:10
  • Status: offline
  • Ribbons : 0
Re: EVGA PowerLink - Power Matters! 2021/10/12 20:04:50 (permalink)
any update on this? this old gtx 1080 powerlink is still an evga elite member reward, but we are in the 3000 series these days. hoping for an update
#47
Page: < 12 Showing page 2 of 2
Jump to:
  • Back to Mobile