dragomirc
SSC Member
- Total Posts : 760
- Reward points : 0
- Joined: 2006/08/14 20:40:01
- Location: Rochester, US
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/11/20 08:07:24
(permalink)
frankd3
LOL. I take it that was sarcasm?
Sure it is. I mean cheaper one costs as 4090 FE  And (spaceship looking) LIAN LE V3000 PLUS cost $500 Not intended to rain on current owners' parade, just shocked with the prices. I would add a dust filter chamber as this open-air flow (like test bed) is a dust magnet.
|
Inismona
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 2020/01/25 12:44:32
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/11/20 08:17:04
(permalink)
It’s not really a dust magnet if your environment is normal. The dust collects on the rad from the fans the same as it would in a case or not. Sure in some cases your rad would have one extra dust filter or plastic/metal front mesh, but the difference is hardly noticeable, why would it be a dust “magnet”? It’s super easy to just vacuum off the dust periodically if it gets on the mobo, but I only ever run open test benches and can’t say dust has ever been a thought. Never vacuumed or done anything but clean dust from rads once in awhile like on a normal loop.
|
dragomirc
SSC Member
- Total Posts : 760
- Reward points : 0
- Joined: 2006/08/14 20:40:01
- Location: Rochester, US
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/11/20 08:42:21
(permalink)
Inismona
It’s not really a dust magnet if your environment is normal. The dust collects on the rad from the fans the same as it would in a case or not. Sure in some cases your rad would have one extra dust filter or plastic/metal front mesh, but the difference is hardly noticeable, why would it be a dust “magnet”? It’s super easy to just vacuum off the dust periodically if it gets on the mobo, but I only ever run open test benches and can’t say dust has ever been a thought. Never vacuumed or done anything but clean dust from rads once in awhile like on a normal loop.
Thanks for sharing your experience  I used to overclock/benchmark and often remove side of a case which resulted more dust inside case. Never had a carpet (micro dust factory) in my house but wooden floor, and still static dust come from nowhere. Current case has filters on all intake fans (vacuuming monthly) Finally, start to clean or replace filters on central air more often as ultimate anti-dust solution. Glad you enjoy using this extraordinary structure. 
|
Okayevga
New Member
- Total Posts : 5
- Reward points : 0
- Joined: 2021/11/18 07:09:53
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/11/20 13:29:15
(permalink)
|
frankd3
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 2011/05/20 06:20:30
- Location: Florida
- Status: online
- Ribbons : 14
Re: EVGA E1 is now available for purchase!
2022/11/20 14:27:30
(permalink)
Okayevga
 
ill add a second rad when I block the gpu, shorter cables on the way as well, nowhere to hide for cable management.
Considering what you're working with your cable management looks great! Even though it's showing it's neat. That's more important than hiding it.
EVGA Z590 FTW, i9-11900K, EK-AIO Elite 360 D-RGB, GSkill F4-3600C14D-32GTRSA, EVGA RTX 3090 Ti FTW3 Ultra, EVGA SuperNOVA 1600 T2, Corsair 5000D Airflow, BenQ EX2780Q 2560x1440, Windows 10 Pro
|
seanronimo
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2022/01/27 19:29:13
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/11/20 14:36:31
(permalink)
|
frankd3
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 2011/05/20 06:20:30
- Location: Florida
- Status: online
- Ribbons : 14
Re: EVGA E1 is now available for purchase!
2022/11/21 14:53:53
(permalink)
What software do you use to drive the gauges?
EVGA Z590 FTW, i9-11900K, EK-AIO Elite 360 D-RGB, GSkill F4-3600C14D-32GTRSA, EVGA RTX 3090 Ti FTW3 Ultra, EVGA SuperNOVA 1600 T2, Corsair 5000D Airflow, BenQ EX2780Q 2560x1440, Windows 10 Pro
|
EVGA_Lee
Moderator
- Total Posts : 4247
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: EVGA E1 is now available for purchase!
2022/11/21 15:02:02
(permalink)
|
frankd3
SSC Member
- Total Posts : 512
- Reward points : 0
- Joined: 2011/05/20 06:20:30
- Location: Florida
- Status: online
- Ribbons : 14
Re: EVGA E1 is now available for purchase!
2022/11/21 15:11:55
(permalink)
EVGATech_LeeM
frankd3
What software do you use to drive the gauges?
The EVGA E1 Control Software:
https://www.evga.com/software/
Thank you. I should have figured there would be special software. 
EVGA Z590 FTW, i9-11900K, EK-AIO Elite 360 D-RGB, GSkill F4-3600C14D-32GTRSA, EVGA RTX 3090 Ti FTW3 Ultra, EVGA SuperNOVA 1600 T2, Corsair 5000D Airflow, BenQ EX2780Q 2560x1440, Windows 10 Pro
|
EVGA_Lee
Moderator
- Total Posts : 4247
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: EVGA E1 is now available for purchase!
2022/11/22 09:26:59
(permalink)
frankd3
EVGATech_LeeM
frankd3
What software do you use to drive the gauges?
The EVGA E1 Control Software:
https://www.evga.com/software/
Thank you. I should have figured there would be special software.
No worries. You're not the first person to ask. Keep in mind that you will need to keep the software running for the gauges to work. You can minimize to the task bar to hide it, of course, but it will need to run one way or another to monitor the temps.
|
Uhhhklol
New Member
- Total Posts : 1
- Reward points : 0
- Joined: 2021/09/07 23:44:41
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/11/28 17:32:53
(permalink)
The add to cart button for the E1 is gone?
|
EVGATech_ChrisB
EVGA Tech Support
- Total Posts : 2032
- Reward points : 0
- Joined: 2007/05/14 16:19:27
- Status: offline
- Ribbons : 1
Re: EVGA E1 is now available for purchase!
2022/11/29 09:53:00
(permalink)
|
Fontain616
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2022/11/14 14:46:28
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/11/30 04:16:03
(permalink)
seanronimo
There will also be a distro block to go along with the PoweBoard with a ddc and d5 pump mount
Any updates on this? Really looking forward to it.
|
getalife
New Member
- Total Posts : 61
- Reward points : 0
- Joined: 2015/11/25 18:20:05
- Location: Quebec Canada
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/11/30 08:11:42
(permalink)
Well, i don't know whom in the product chain did'nt realise that case at that price, won't find a lot of buyers. I assume it was like a special fashion edition and they not considerate that product has a public wide.
So bad at third of that price, everyone will buy it and that will be a flagship instead of limited rare edition, and will compete directly in Corsair/LianLi casing playground!
Simply enthousiasmic about computer since 1992
|
seanronimo
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2022/01/27 19:29:13
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/11/30 10:02:43
(permalink)
Fontain616
seanronimo
There will also be a distro block to go along with the PoweBoard with a ddc and d5 pump mount
Any updates on this? Really looking forward to it.
Yes, making another rev to position the ports to not interfere with the front mounted radiator, as well as adding more Sata SSD mounts
|
Fontain616
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2022/11/14 14:46:28
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/12/01 03:34:51
(permalink)
seanronimo
Fontain616
seanronimo
There will also be a distro block to go along with the PoweBoard with a ddc and d5 pump mount
Any updates on this? Really looking forward to it.
Yes, making another rev to position the ports to not interfere with the front mounted radiator, as well as adding more Sata SSD mounts
Nice! Will we be able to run the distro without the powerboard? I'm willing to run the powerboard if necessary, but I'm really just looking for the distro + D5 mount. The Sata SSDs will certainly be nice to have. FYI: I got my rads in and was able to do a fitment test. They are 48mm thick. When combined with 25mm fans, there's maybe 2-3mm left between the fans and the suspension cables for the top bracket -- at most (there's a little more room in the front); I wouldn't go any thicker on top than 73mm combined.
|
seanronimo
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2022/01/27 19:29:13
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/12/05 09:32:31
(permalink)
The Add to cart button is gone again
The Powerboard itself will replace the motherboard tray since there were not enough mounting points.
|
Fontain616
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2022/11/14 14:46:28
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/12/05 10:01:39
(permalink)
seanronimo
The Add to cart button is gone again
The Powerboard itself will replace the motherboard tray since there were not enough mounting points.
Gotcha. I was wondering how they were going to go about that, seeing as how there only appear to be 2 holes on the right side. (I wonder what EVGA originally had planned for those...? Note there was a carbon fiber cable shield in the original concept video that didn't make it to production.) Hopefully the process of removing the motherboard tray and taking apart the steel suspension cables isn't too bad.
|
seanronimo
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2022/01/27 19:29:13
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/12/07 17:04:13
(permalink)
Fontain616
seanronimo
The Add to cart button is gone again
The Powerboard itself will replace the motherboard tray since there were not enough mounting points.
Hopefully the process of removing the motherboard tray and taking apart the steel suspension cables isn't too bad.
The motherboard steel cable grommets can be removed easily, they're screwed on/off. For the cables, EVGA details how these are removed in the manual. The latest rev of the PowerBoard has mounts for 4 SSDs. We're working thru the mounting points for the Distro Block as well as the design of the block now. The block will feature a mount for a D5 or DDC pump.
|
seanronimo
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2022/01/27 19:29:13
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/12/20 08:51:20
(permalink)
Update: the design of the PowerBoard is complete. they’re doing leak testing on the distro block.
|
Achiconelli
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2022/12/20 10:13:01
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/12/20 10:16:20
(permalink)
Hi Everyone. I purchased this case and completed building it a couple days ago. The GPU is reading zero while everything else is good. I am using a 6900XT. Any ideas?
|
EVGA_Lee
Moderator
- Total Posts : 4247
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: EVGA E1 is now available for purchase!
2022/12/20 11:36:35
(permalink)
Achiconelli
Hi Everyone. I purchased this case and completed building it a couple days ago. The GPU is reading zero while everything else is good. I am using a 6900XT. Any ideas?
I'll have our team look into this.
|
Fontain616
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2022/11/14 14:46:28
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/12/21 02:42:37
(permalink)
seanronimo
Update: the design of the PowerBoard is complete. they’re doing leak testing on the distro block.
Any photos you can share of a prototype design? I'm getting my waterblocks this week, and I'm on the fence as to whether I should move forward with my build as-is, or if I should hold out and wait for this.
|
seanronimo
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2022/01/27 19:29:13
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/12/23 10:46:07
(permalink)
It’s of those things were if you’ve waited this long than waiting another 2 weeks won’t make a big difference. He’s going to post an update for it in early January. Production of the PowerBoard begins next week and the final version of the distro block was machined yesterday.
|
Fontain616
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2022/11/14 14:46:28
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2022/12/27 19:44:00
(permalink)
EVGATech_LeeM
Achiconelli
Hi Everyone. I purchased this case and completed building it a couple days ago. The GPU is reading zero while everything else is good. I am using a 6900XT. Any ideas?
I'll have our team look into this.
I am having the same issue. GPU is a Titan X Pascal.
|
EVGA_Lee
Moderator
- Total Posts : 4247
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: EVGA E1 is now available for purchase!
2023/01/05 09:54:49
(permalink)
Fontain616
EVGATech_LeeM
Achiconelli
Hi Everyone. I purchased this case and completed building it a couple days ago. The GPU is reading zero while everything else is good. I am using a 6900XT. Any ideas?
I'll have our team look into this.
I am having the same issue. GPU is a Titan X Pascal.
I'll check with the team.
|
Achiconelli
New Member
- Total Posts : 2
- Reward points : 0
- Joined: 2022/12/20 10:13:01
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2023/01/06 06:53:55
(permalink)
EVGATech_LeeM
Fontain616
EVGATech_LeeM
Achiconelli
Hi Everyone. I purchased this case and completed building it a couple days ago. The GPU is reading zero while everything else is good. I am using a 6900XT. Any ideas?
I'll have our team look into this.
I am having the same issue. GPU is a Titan X Pascal.
I'll check with the team.
Hey. I ended up needing to return my AMD graphics card and didn't have a chance to try the driver. I since installed an old Titan X and everything has been working good. Thanks for the help!
|
EVGA_Lee
Moderator
- Total Posts : 4247
- Reward points : 0
- Joined: 2016/11/04 14:43:35
- Location: Brea, CA
- Status: offline
- Ribbons : 14
Re: EVGA E1 is now available for purchase!
2023/01/10 15:13:11
(permalink)
Fontain616
EVGATech_LeeM
Achiconelli
Hi Everyone. I purchased this case and completed building it a couple days ago. The GPU is reading zero while everything else is good. I am using a 6900XT. Any ideas?
I'll have our team look into this.
I am having the same issue. GPU is a Titan X Pascal.
Please try this updated version of the software: https://www.evga.com/support/download/showdlinfo.aspx?id=19179
|
Fontain616
New Member
- Total Posts : 10
- Reward points : 0
- Joined: 2022/11/14 14:46:28
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2023/01/18 02:55:01
(permalink)
seanronimo
It’s of those things were if you’ve waited this long than waiting another 2 weeks won’t make a big difference. He’s going to post an update for it in early January. Production of the PowerBoard begins next week and the final version of the distro block was machined yesterday.
Any updates on this?
|
seanronimo
New Member
- Total Posts : 25
- Reward points : 0
- Joined: 2022/01/27 19:29:13
- Status: offline
- Ribbons : 0
Re: EVGA E1 is now available for purchase!
2023/01/18 09:11:36
(permalink)
Good news everyone, the Singularity E1 Powerboard and Distro Block set is now available with shipment in 4 weeks (of this posting) The PowerBoard replaces the existing E1 motherboard tray; does away with cable clutter, while providing a foundation for a custom loop. It also has mounts for up to 3 SATA SSDs and mounting points for the distro block and pump Gallery: https://gallery.singulari...ers.com/albums/evgae1/Store: https://singularitycases....ibution-plate-evga-e1/
post edited by seanronimo - 2023/01/18 09:16:01
|