bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/23 08:10:23
(permalink)
Well at least Core 21 Runs Well But 2 of 2 Core 18 Failed on my GTX 1080, Not an issue on my GTX 980 *********************** Log Started 2016-12-22T19:13:06Z *********************** 23:47:33:WU02:FS01:0x18:ERROR:exception: Max Retries Reached 23:47:33:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72) 23:47:34:ERROR:WU01:FS01:Exception: Server did not assign work unit ******************************* Date: 2016-12-23 ******************************* ******************************* Date: 2016-12-23 ******************************* 08:07:46:WU01:FS01:0x18:ERROR:exception: clFlush 08:07:54:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72) ******************************* Date: 2016-12-23 *******************************
post edited by bcavnaugh - 2016/12/23 10:22:20
|
widsss
iCX Member
- Total Posts : 432
- Reward points : 0
- Joined: 2011/03/07 09:56:20
- Status: offline
- Ribbons : 0
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/23 16:40:46
(permalink)
Just my unscientific 2 cents here, but I think the new hotfix driver has a little less PPD than 372.70 on a 980
  Intel i7 3770K @ 4.5 Ghz. / Asus P67 Pro / 2 x EVGA GTX 980 SC / 16gb Corsair Vengeance RAM / 2 x Crucial 64 gb. SSD / 1 Tb. Seagate / Corsair AX 850 / Corsair H100
Intel i7 3930k @ 4.3 Ghz / Asus Rampage IV Extreme / 2 x EVGA GTX 980 Ti SC / 32 gb Gskill Ripjaws RAM / 256 gb Vertex 4 SSD / Corsair AX1200i / Corsair H110i GT
|
scott@bjorn3d
SSC Member
- Total Posts : 692
- Reward points : 0
- Joined: 2006/11/20 04:37:19
- Status: offline
- Ribbons : 2
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/24 22:49:01
(permalink)
Yes I have lost about 300K ppd between all 4 of my cards with the new driver.
|
howdy2u2
FTW Member
- Total Posts : 1896
- Reward points : 0
- Joined: 2006/12/01 04:31:48
- Status: offline
- Ribbons : 6
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/25 05:26:04
(permalink)
I too noticed the PPD reduction and rolled back to 373.06 because it is still where it's at for folding. That is if all you do is folding and are not playing any current release games on the rig.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30991
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/25 06:59:15
(permalink)
howdy2u2
I too noticed the PPD reduction and rolled back to 373.06 because it is still where it's at for folding. That is if all you do is folding and are not playing any current release games on the rig.
You like that driver better than 372.90 --- it gives better PPD ? Thanks to everyone else for sharing their experience with the new "patch/driver" - glad I sat this one out
|
howdy2u2
FTW Member
- Total Posts : 1896
- Reward points : 0
- Joined: 2006/12/01 04:31:48
- Status: offline
- Ribbons : 6
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/25 07:40:20
(permalink)
Cool GTX
howdy2u2
I too noticed the PPD reduction and rolled back to 373.06 because it is still where it's at for folding. That is if all you do is folding and are not playing any current release games on the rig.
You like that driver better than 372.90 --- it gives better PPD ?
Thanks to everyone else for sharing their experience with the new "patch/driver" - glad I sat this one out
In my rigs a very slight Yes. Overall for me they just work better, but I'm using these (373.06) in 2 rigs that are running a P55 MOBO Folding AND Crunching @ the same time. My main rig I had to suck it up and go to the latest set of crummy drivers since the newly released games require them to run. YMMV, but I tried them on one P55 rig and rolled them back after a few WUs completed noticing the PPD went down and temps went up a degree or two.(Temps were bumping the the temp limit in AB where I set it and down clocking the GPU) Again though, they might work differently on everyone's rigs compared to mine. It pretty much boils down to..................if you want to Fold and run the most recently released games (BF1) you have to update to this hotfix driver release, or choose a earlier released driver that works best for your system for Folding and forgo the newest games.
post edited by howdy2u2 - 2016/12/25 07:42:31
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/25 09:13:00
(permalink)
Going back to 373.06 or I may give 372.90. No Work Units have Failed with this Driver. Best over all Driver for Pascal and Maxwell GPUs. On Windows 10 I do remove NvBackend.exe from starting up so I delete it from the Run in the Registry.
post edited by bcavnaugh - 2016/12/26 10:20:56
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/26 15:26:46
(permalink)
Team I can add that with Driver 372.90 I am getting much better PPD than I was with Driver 373.06. I wished I had run this Driver Version during our last TZC. Added: I ran some Collatz as well under driver 372.90 and my time dropped from 38:18 to 19:50 so this hot fix driver (376.48) for duel Folders and Crunchers are not recommended to use.
post edited by bcavnaugh - 2016/12/26 17:43:48
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30991
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/26 16:09:05
(permalink)
bcavnaugh
Team I can add that with Driver 372.90 I am getting much better PPD than I was with Driver 373.06.
I wished I had run this Driver Version during our last TZC.
Well I was going to tell you, but ......... Thanks for sharing your results with the Team 
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30991
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/29 09:56:12
(permalink)
Do Folding members think it would be a Good idea to just have 1 thread in the Folding section, dedicated to GPU drivers - regardless of Version ?
Just like we do with milestones.
We could create a thread - my title suggestion: "GPU drivers and Folding"
If everyone knew where to look, and it was not tied to any one driver number, we could be better organized
What do fellow forum members think about this ?
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/29 10:08:16
(permalink)
Cool GTX
Do Folding members think it would be a Good idea to just have 1 thread in the Folding section, dedicated to GPU drivers - regardless of Version ?
Just like we do with milestones.
We could create a thread - my title suggestion: "GPU drivers and Folding"
If everyone knew where to look, and it was not tied to any one driver number, we could be better organized
What do fellow forum members think about this ?
I would still like to hear from DutchForce about this.
|
Chris21010
FTW Member
- Total Posts : 1587
- Reward points : 0
- Joined: 2006/05/03 07:26:39
- Status: offline
- Ribbons : 9
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/29 10:33:10
(permalink)
the only problem with a single thread is that the owner of it will need to keep the first post updated with accurate information, else people will have to dig through it to find relevant information. but if someone is willing to keep it updated than i am all for making and stickying it.
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30991
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/29 14:42:04
(permalink)
I would think the latest information would be on the last page or two - No ?
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/29 14:54:36
(permalink)
|
Cool GTX
EVGA Forum Moderator
- Total Posts : 30991
- Reward points : 0
- Joined: 2010/12/12 14:22:25
- Location: Folding for the Greater Good
- Status: offline
- Ribbons : 122
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2016/12/29 15:02:24
(permalink)
bcavnaugh
Team I can add that with Driver 372.90 I am getting much better PPD than I was with Driver 373.06.
I wished I had run this Driver Version during our last TZC.
Added:
I ran some Collatz as well under driver 372.90 and my time dropped from 38:18 to 19:50 so this hot fix driver (376.48) for duel Folders and Crunchers are not recommended to use.
Thanks for sharing all of your driver Beta work and results BR awarded
|
SM-71
iCX Member
- Total Posts : 292
- Reward points : 0
- Joined: 2010/08/26 09:51:54
- Status: offline
- Ribbons : 8
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2017/01/06 14:52:36
(permalink)
For what it's worth, I get this error with any driver version 372.55/.70/.90 - 373.06 - 375.63/.70/.95 - 376.09/.19/.33 & now the "hotfix" 376.48
01:28:39:WARNING:WU00:FS01:FahCore returned an unknown error code which probably indicates that it crashed
01:28:39:WARNING:WU00:FS01:FahCore returned: UNKNOWN_ENUM (127 = 0x7f)
As far as I know, I've only had one "bad work unit" error & I believe it was with driver 375.70. FahCore error code message comes up pretty frequently on all but 372.90 & 376.48. With 372.90, I would get one every 2 - 3 days. Last night was first one (in a little over 3 days of use) for 376.48. Most of the other drivers I would get one in as little as a couple hours after driver install.
I've not had any problems with any other cores, only core 21. Running Furmark, card runs flawless with +50MHz overclock on core speed, & never exceeds 68C (water cooled) except when running some core 21 work units where it has reached 70C. IMO this is an error with core21, not a driver or video card error....
Rebuild 2.0 Specs: Phantek's Enthoo Pro Full Tower case * Gigabyte Z690 Gaming X DDR4 motherboard * Intel i9-13900KS CPU with Kraken X63 AIO * WIN 11 PRO 64bit * MSI 4070 Ti Gaming X Trio GPU * Corsair Vengeance 64GB(4x16GB) RAM * Solidigm P44 Pro 2TB M.2 NVMe SSD (Win11 Pro) + Intel 665p 1TB M.2 NVMe (storage) + Samsung 990 Pro 2TB M.2 NVMe (storage) + Samsung 980 1TB M.2 NVMe (Ubuntu) * Seasonic Vertex GX-1200 1200W ATX 3.0 PSU * Samsung 50 inch QN90A 4K TV/monitor * FANS: Bitfenix Spectre Pro 200mm front intake + 2x Noctua NF-A14 Industrial PPC 140mm exhaust on Kraken X63 radiator + 1 Noctua NF-A12 120mm rear intake
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2017/01/06 15:04:47
(permalink)
SM-71
For what it's worth, I get this error with any driver version 372.55/.70/.90 - 373.06 - 375.63/.70/.95 - 376.09/.19/.33 & now the "hotfix" 376.48
01:28:39:WARNING:WU00:FS01:FahCore returned an unknown error code which probably indicates that it crashed
01:28:39:WARNING:WU00:FS01:FahCore returned: UNKNOWN_ENUM (127 = 0x7f)
As far as I know, I've only had one "bad work unit" error & I believe it was with driver 375.70. FahCore error code message comes up pretty frequently on all but 372.90 & 376.48. With 372.90, I would get one every 2 - 3 days. Last night was first one (in a little over 3 days of use) for 376.48. Most of the other drivers I would get one in as little as a couple hours after driver install.
I've not had any problems with any other cores, only core 21. Running Furmark, card runs flawless with +50MHz overclock on core speed, & never exceeds 68C (water cooled) except when running some core 21 work units where it has reached 70C. IMO this is an error with core21, not a driver or video card error....
If you want to Fold it is best to use Driver 372.90 ATM. Under the Hot Fix Driver 376.48 I stated to have Core 18 Issues on the GTX 10xx Cards or Pascal. As Posted Above http://forums.evga.com/FindPost/2597286Re: Gpu error while folding 7 minutes ago http://forums.evga.com/FindPost/2602344 soullesshunter i have 376.33 for my 1070s And that Driver is also known to not work on Pascal and Maxell Graphics Cards. Core 21 (OpenMM GPU) issues with new Windows NVIDIA drivers 375.57 and 375.63 and 376.33 are part of this bad driver. New Hot Fix Driver 376.48 fixes folding issue. More Threads you should review under Folding@EVGA post edited by bcavnaugh - 4 minutes ago
post edited by bcavnaugh - 2017/01/06 15:10:10
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2017/01/10 21:53:57
(permalink)
From http://forums.evga.com/FindPost/2604195GeForce Hot Fix driver version 376.60 Answer ID 4293 Updated 01/10/2017 10:38 AM GeForce HotFix driver version 376.60
This is GeForce Hot Fix driver version 376.60 that addresses the following: Battlefield 1 crash on some Kepler based GPUs Dark puddles in Battlefield 1 Random black screen in DOTA 2 Click the appropriate link to download. Windows 10 64-bit version32-bit version Windows 8.1/Windows 7: 64-bit version32-bit version
post edited by bcavnaugh - 2017/01/10 21:58:12
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2017/01/10 21:58:58
(permalink)
(Now Staying On Driver 373.06)
post edited by bcavnaugh - 2017/02/06 12:15:06
|
maveric191
New Member
- Total Posts : 52
- Reward points : 0
- Joined: 2011/01/16 15:37:13
- Status: offline
- Ribbons : 0
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2017/02/15 23:34:45
(permalink)
Anyone have any feedback on version 378.66?
|
chap34
Superclocked Member
- Total Posts : 207
- Reward points : 0
- Joined: 2017/01/25 05:21:25
- Status: offline
- Ribbons : 0
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2017/02/16 06:15:50
(permalink)
Not yet, 378.48 or whatever the last one was works enough for me. I tried to get on 372.90 but with windows wanting to update it, there was too much hassle involved.
|
bcavnaugh
The Crunchinator
- Total Posts : 38977
- Reward points : 0
- Joined: 2012/09/18 17:31:18
- Location: USA Affiliate E5L3CTGE12 Associate 9E88QK5L7811G3H
- Status: offline
- Ribbons : 282
Re: Drivers 376.09/.19/.33 still no fix for FaH (Core21 on Maxwell/Pascal GPUs).
2017/02/16 12:13:29
(permalink)
I am Still Waiting to for this to happen.
"While a slight reduction in performance may be observed, this performance regression should be eliminated when NVIDIA removes the hotfix in forthcoming driver updates."
|