gr1mf4c3d
EGC Admin
- Total Posts : 1154
- Reward points : 0
- Joined: 11/10/2009
- Location: Los Angeles, CA
- Status: offline
- Ribbons : 3
Thursday, December 29, 2011 3:29 AM
(permalink)
|
ZelmoQuad
SSC Member
- Total Posts : 732
- Reward points : 0
- Joined: 12/2/2005
- Location: Columbus, OH
- Status: offline
- Ribbons : 6
Re:CPU wont lock onto the motherboard
Thursday, December 29, 2011 3:47 AM
(permalink)
Scratches are not a big deal. If you can send more pix of the lid as far down as it gets and shoot it from the side, that would give more to th story. Make sure to get all the ends in the photos. Ignoring the handle, if you lower the frame, and jiggle it so there is nothing locking it up, will the fork be under the level of the locking post?
HAF X Nvidia-ASUS IV Formula/i7 3930K OC'd 4.7/C-M Nepton 280L/MZ-75E1T0B-AM/16G Corsair Dominator GT 2133C9/GTX1080-SLI/CM SPM2 1500W on Asus 27", 165Hz HAF XM- ASUS Maximus-V Gene/3770K/Kuhler 920/Samsung MZ-7TE1TBW, 500GB/8G Corsair Rampage 1600 XMP/GTX690/CM V1000 1000W Stryker -Wht - ASUS Rampage V Extreme USB 3.1/i7 5930K OC'd to 4.4MHz/EVGA CLC 280/ 16GB GSKILL 16G-F4-3200Q/GTX1080Ti-SLI/Samsung MZ-7TE1T0B, 500GB/EVGA 1200P2, G510 Keyboard & Nostromo/MadCatz MMO 7/Windows 10 Pro 64-bit
|
ZelmoQuad
SSC Member
- Total Posts : 732
- Reward points : 0
- Joined: 12/2/2005
- Location: Columbus, OH
- Status: offline
- Ribbons : 6
Re:CPU wont lock onto the motherboard
Thursday, December 29, 2011 4:09 AM
(permalink)
HAF X Nvidia-ASUS IV Formula/i7 3930K OC'd 4.7/C-M Nepton 280L/MZ-75E1T0B-AM/16G Corsair Dominator GT 2133C9/GTX1080-SLI/CM SPM2 1500W on Asus 27", 165Hz HAF XM- ASUS Maximus-V Gene/3770K/Kuhler 920/Samsung MZ-7TE1TBW, 500GB/8G Corsair Rampage 1600 XMP/GTX690/CM V1000 1000W Stryker -Wht - ASUS Rampage V Extreme USB 3.1/i7 5930K OC'd to 4.4MHz/EVGA CLC 280/ 16GB GSKILL 16G-F4-3200Q/GTX1080Ti-SLI/Samsung MZ-7TE1T0B, 500GB/EVGA 1200P2, G510 Keyboard & Nostromo/MadCatz MMO 7/Windows 10 Pro 64-bit
|
gr1mf4c3d
EGC Admin
- Total Posts : 1154
- Reward points : 0
- Joined: 11/10/2009
- Location: Los Angeles, CA
- Status: offline
- Ribbons : 3
Re:CPU wont lock onto the motherboard
Thursday, December 29, 2011 4:21 AM
(permalink)
|
loveha
Omnipotent Enthusiast
- Total Posts : 10302
- Reward points : 0
- Joined: 9/26/2009
- Location: Beulah Michigan
- Status: offline
- Ribbons : 65

Re:CPU wont lock onto the motherboard
Thursday, December 29, 2011 4:31 AM
(permalink)
There is going to be pressure on the CPU locking mechanism. Maybe even hear some crunching. That's normal. Though I do have to say those dents in the CPU have me worried.
Case - Phanteks Enthoo Evolv XMobo - EVGA X570 FTWCPU - AMD Ryzen 9 5900XRAM - 32GB Trident Z Royal 3600MHz 14-14-14-34GPU - EVGA RTX 3080 Ti FTW3 Ultra GamingPSU - Seasonic Prime TX-1000Heatkiller IV CPU Waterblock / Heatkiller V GPU WaterblockHeatkiller V EBC Active Backplate / Two Heatkiller Rad 360 L Six Noctua NF-A12x25 / Heatkiller D5 Pump
|
gr1mf4c3d
EGC Admin
- Total Posts : 1154
- Reward points : 0
- Joined: 11/10/2009
- Location: Los Angeles, CA
- Status: offline
- Ribbons : 3
Re:CPU wont lock onto the motherboard
Thursday, December 29, 2011 4:37 AM
(permalink)
First time ive ever had, and ever seen, this kind of problem with the mobo socket. Im guessing either the indents on the frame are too deep, or the locking post (at the very bottom) is too low for the fork.
|
bullet0801
SSC Member
- Total Posts : 761
- Reward points : 0
- Joined: 10/9/2009
- Status: offline
- Ribbons : 1
Re:CPU wont lock onto the motherboard
Thursday, December 29, 2011 4:53 AM
(permalink)
There was quite a bit of crunching when I first installed my i5-2500k into my Z68 FTW. It had me worried, but I watched very closely and slowly lowered the lever. Nothing seemed to be going wrong so I went ahead and pushed the lever down in. When the build was finished everything powered on nicely and worked great. :) Later when I went to apply different TIM and a new cooler to the CPU the lever lowered a lot easier. I removed the CPU to clean it and put it back and it was nice and smooth. Though I must say the noise was a bit disturbing. It really does sound like you're breaking something :/
i5-2500k @ 4.8ghz CM Hyper212+ CPU Cooler EVGA Z68 FTW EVGA GTX 660 Ti SC+ (122/75/500) SilverStone ST-1000p PSU G.Skill 8gb (2x4gb) 1600mhz WD 1TB Black CM Storm Stryker Case
|
Re:CPU wont lock onto the motherboard
Thursday, December 29, 2011 5:01 AM
(permalink)
Just make sure your notches on the cpu are right with the board, and then seat it, wiggle it barely, then pull down the arm to lock it. Yes it will be tight, but no worries.
|
gr1mf4c3d
EGC Admin
- Total Posts : 1154
- Reward points : 0
- Joined: 11/10/2009
- Location: Los Angeles, CA
- Status: offline
- Ribbons : 3
Re:CPU wont lock onto the motherboard
Thursday, December 29, 2011 8:31 PM
(permalink)
Issue resolved, customer support said this is how it was designed (very tight), and so I forced it closed.Had to do it really fast and forcefully, I am still not sure if it's supposed to scrape the sides of the CPU. But who wouldn't take the cautious approach with a new MOBO+CPU?
|