Last week I got a lot of packages
 

 
Let's start with the material you sent me by  ENERMAX and   LEPA
 

 
 

 
An overview
 
   
 
Let's move on to the detail of the N° 46 T.B. Apollish 140mm Red UCTA14N-R
 
           
 
and of n°16 T.B. Silence 140mm UCTB14B
 
             and of the LEPA G-1600
 
                                       
Ah ah Bro almost forgot ...... 

 
Take also this and if you don't like it, take a couple of beers first and then look at it again 
 
https://www.youtube.com/watch?v=g7nME8zZoVU
 
After irradiation of the case with the light of 46 Apollish Enermax 140mm fans, something is mutated .......... 

Something BIG, something BAD, something EVIL 

 
  
 
                         

Hi Guys, The weekend is umboxing time, let's see all the little things that I received from Aqua Computer, thank Sven for participation in my Project
 

 
but let's start right away with the big pack
 
 
 
and a nice overview
 
 
     
 
But we go straight to the strong piece Aquero 6XT
 
                        
 
The  Passive heat sink for aquaero 6
 
       
 
and WBs for Aquero
 
        
 
the Aluminum Black Frontplate for aquaero 6 XT
 
     
 
n°4 Aqua Computer D5 pump motor with USB and aquabus interface
 
                
 
Flow sensor "high flow" 
 
          
 
 
 
Temperature sensor inline for liquid
 
   
 
Temperature sensor for air
 

 
safety system shutdown
 
  
 
Y Splitter for Aquabus
 
 
 
some cables for Aquabus connections
 
 
 
some fan extension
 
  
 
Flow Sensors Connection
 
 
 
Let us now something you've already seen, but now we'll look at it in more detail:

 
the Aquatube Aluminum Silver
 
                      
 
and Filter with stainless steel mesh
 
             
 
But unmount it a bit ...
 
     
 
A final overview of these filters that I like so much
 
    

Hi guys,
 
I do some test to check the length of the screws with a double plexy layer
 
  
 
on the top of Cooling Tower   
 
  
 
with a double plexy layer and  the grid on Cooling Tower
 
         
 
on first Frontal
 
  
 
on second Frontal
 
 
 
on lateral fans Block
 
 
 
And then I decided to start painting, even if it is the painting of the internal parts.
 
In theory, I could'ot make it, but in this way so everything will be clean and tidy.
The problem is the complexity of TdR, I'll do one at a time and unmount the various parts that will paint separately.
 
 At the end, when I'll assemble and teste plexy covers if there is need I'll give one last hand.
 
But let's start by the tower that I had to disassemble, remove the paper tape residual, fill hole a few more, sanded and cleaned with acetone
 
         
 
Gone with the Primer
 
  
 
 
 
The paint is already dry on the surface, anyway I will give another hand tomorrow
 
      
 
Actually it is much better and above there is another layer of aluminum that I have taken apart, so it will be even better
 
Here's the second Cooling Tower and then the two together with the case, the color is matte black, there are some imperfection, but this is only a first painting and we don't see it because it'll be cover 
 
      
 
Aquatubes and Aqua Filters Supports:
 

Last Saturday I had the pleasure to come back to visit one of EXTREME MODDING FACTORY headquarters  and to work with the great C3r34L KilL3rs, this time we dealt plexy covers for my case as planned, the parties were already been cut with a little of margin
 
  
 
and we then brought them to the precise measurement with this mega CNC, the C3r34L KilL3rs's Frankenstein Machine
 
     

 
Then we went on this other CNC  to do the  finer working and that's the 8 main parts that we made
 
      
 
While I was there I improvised a hot bending test on a black plexy scrap to see how the material react
 
   
 
Test passed, no color change
 
Thank you again to C3r34L KilL3rs  and Tombino-, their decision to sponsor me, as well as great for my project allowed me to meet two fantastic guys that now I can truly call friends  

Turn on some fans
 
     
 
put the plexy covers on side
 
     
  
 
and on front
 
        
 Overview 

 
 
 
IMHO it's already beautiful, however, remember the famous grids? well, they aren't yet finished, should be painted, but I tried them anyway
 
         
 
Overview
 
        

COMING SOON........

Thanks to Peter  and my new Sponsor EK WB 


EK-Supremacy EVO Elite Edition - Intel 2011



4x EK-FC780 GTX Classy - Nickel

   

2x EK-RAM Monarch X4 Clean CSQ - Nickel

 

4x EK-RAM Monarch Module - Black (2pz)

 

Definitely super and looking forward to the final pics

 
Hi Guys,
 
finally it's official I obtained a great sponsorship Bitspower, thanks to Lily and Vincent for the great support they have given me and for believing in my visionary project.
 
Soon the Umboxing as always
 
900D Monster Xtreme sponsored by:
 

 
 
Main Sponsor

rjohnson11
Definitely super and looking forward to the final pics

Thanks Bro 

Vlada011
Incredible setup...4x GTX780Ti KP Classified, my favorite card...I can dream only about this.
It would be nice if EVGA build same PCB for GM200/GM210 because same waterblock EK 780 Classy for more cards.
Now is compatible and with GTX980 Classified I think.

I am very happy with my X79 Dark and my 4 GTX780Ti Classified KPE, I think they give a special style to my mod,  but it was not at all easy to get them.
After investing a hefty sum on EVGA HW, of which I am a big fan, I was hoping to get a sponsorship, in this case the project would be called EVGA Xtreme Monster, but our beloved Brand has not shown at all interested, while others have competed to sponsor me, so ......

LucaJ

Vlada011
Incredible setup...4x GTX780Ti KP Classified, my favorite card...I can dream only about this.
It would be nice if EVGA build same PCB for GM200/GM210 because same waterblock EK 780 Classy for more cards.
Now is compatible and with GTX980 Classified I think.

I am very happy with my X79 Dark and my 4 GTX780Ti Classified KPE, I think they give a special style to my mod,  but it was not at all easy to get them.
After investing a hefty sum on EVGA HW, of which I am a big fan, I was hoping to get a sponsorship, in this case the project would be called EVGA Xtreme Monster, but our beloved Brand has not shown at all interested, while others have competed to sponsor me, so ......

Did you submit your request for sponsorship through the proper EVGA channels? Please note that EVGA gets requests like this quite a bit as far as I understand it so not everyone can be sponsored. 

rjohnson11

LucaJ

Vlada011
Incredible setup...4x GTX780Ti KP Classified, my favorite card...I can dream only about this.
It would be nice if EVGA build same PCB for GM200/GM210 because same waterblock EK 780 Classy for more cards.
Now is compatible and with GTX980 Classified I think.

I am very happy with my X79 Dark and my 4 GTX780Ti Classified KPE, I think they give a special style to my mod,  but it was not at all easy to get them.
After investing a hefty sum on EVGA HW, of which I am a big fan, I was hoping to get a sponsorship, in this case the project would be called EVGA Xtreme Monster, but our beloved Brand has not shown at all interested, while others have competed to sponsor me, so ......

Did you submit your request for sponsorship through the proper EVGA channels? Please note that EVGA gets requests like this quite a bit as far as I understand it so not everyone can be sponsored. 

ok ok guys, it isn't a problem, it will be for another time, I think this discussion we can finish here, I don't want make controversy about it.
I want to finish by saying that I love the EVGA products, that IMHO they are best as MoBo and VGAs and I will choose them anyway
PS.
Your PC is weak, pump up it with EVGA

 

Wow, so many computer parts. I can't keep up.         ;)

whole  lotta fittings

Hi guys,
 
given the number of sponsors that I have achieved I had to change a little the project, reviving an idea that I had set aside: the second window behind the 900D, where I'll make a panel for sponsors, this solution makes the case totally symmetrical each side, as I had thought at the beginning.
 
I took the panel with the window and I used it as a model, I marked and cut back, then much work file
 
     
 
Here's the comparison with the original
 
 
 

I put the panels in place and I drilled the case to fix them, the frontal 
 
       
 
and the rear just modified
 
   
 
A preview on upcoming work ....