EVGA

1080Ti ftw 3. Fan closest to the hdmi ports wont stop spinning.

Author
Post
Essentials Only Full Version
BairdGoW
New Member
  • Total Posts : 3
  • Reward points : 0
  • Joined: 2017/07/31 20:45:09
  • Status: offline
  • Ribbons : 0
2018/09/09 22:50:30 (permalink)
Title says it all. Here is a screenshot of my settings. I'm also curious what the locks are under G, P, and M.
 
post edited by BairdGoW - 2018/09/09 22:54:53

Attached Image(s)

#1

5 Replies Related Threads
    bob16314
    CLASSIFIED ULTRA Member
    • Total Posts : 7859
    • Reward points : 0
    • Joined: 2008/11/07 22:33:22
    • Location: Planet of the Babes
    • Status: offline
    • Ribbons : 761
    Re: 1080Ti ftw 3. Fan closest to the hdmi ports wont stop spinning. 2018/09/09 23:09:15 (permalink)
    Welcome to the forums..Can't see your attached image for some reason.
     
    Sounds like either the little 'Dual BIOS' switch near the PCIe power connectors is in the Secondary/Slave position, or the GPU temperature is high enough (about 60C, I think) to keep the fan running, or you have a fan profile set in EVGA Precision to keep it running.
     
    The 'locks' under G/P/M fans in EVGA Precision?..That links the fans together or unlinks them.

    * Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * 
     
    "Whatever it takes, as long as it works" - Me
     
     
     
    #2
    BairdGoW
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2017/07/31 20:45:09
    • Status: offline
    • Ribbons : 0
    Re: 1080Ti ftw 3. Fan closest to the hdmi ports wont stop spinning. 2018/09/10 00:06:28 (permalink)
    I was in slave changed it to master and that didn't change anything. you might be able to see the image now I edited my post. My profile is set to come on at 60C, its not anywhere near that.
    #3
    bob16314
    CLASSIFIED ULTRA Member
    • Total Posts : 7859
    • Reward points : 0
    • Joined: 2008/11/07 22:33:22
    • Location: Planet of the Babes
    • Status: offline
    • Ribbons : 761
    Re: 1080Ti ftw 3. Fan closest to the hdmi ports wont stop spinning. 2018/09/10 07:02:19 (permalink)
    Weird.
     
    The horizontal dotted yellow line at the bottom of the Fan Curve Editor is the minimum allowable fan speed and won't go below that even with a Precision fan curve..Looks like it's still using the fan curve of the Slave/Secondary BIOS..After flipping the BIOS switch, restart your PC..Also, if you flip the switch and shut down/cold start your PC again and you have Fast Startup (Windows 8/10) enabled in the Windows Power Options, it won't take effect.
     
    You have the P (Power) and M (Memory) fans linked (little link buttons you can click on below G/P/M fans) to the G (GPU) fan, and Auto fan speed enabled (little blue fan buttons above the G/P/M fans) so they should all be running I would assume.

    That's all I know about it, but I don't have an iCX card and not totally sure..So, I'll bow out of here gracefully and let somebody else that has an iCX card chime in on it.

    * Corsair Obsidian 450D Mid-Tower - Airflow Edition * ASUS ROG Maximus X Hero (Wi-Fi AC) * Intel i7-8700K @ 5.0 GHz * 16GB G.SKILL Trident Z 4133MHz * Sabrent Rocket 1TB M.2 SSD * WD Black 500 GB HDD * Seasonic M12 II 750W * Corsair H115i Elite Capellix 280mm * EVGA GTX 760 SC * Win7 Home/Win10 Home * 
     
    "Whatever it takes, as long as it works" - Me
     
     
     
    #4
    Cool GTX
    EVGA Forum Moderator
    • Total Posts : 31119
    • Reward points : 0
    • Joined: 2010/12/12 14:22:25
    • Location: Folding for the Greater Good
    • Status: offline
    • Ribbons : 123
    Re: 1080Ti ftw 3. Fan closest to the hdmi ports wont stop spinning. 2018/09/10 07:11:09 (permalink)
    I'll go one further to bob16314 suggestion - which are spot On including Minimum RPM is the Dotted line
     
    Disable Fast Boot & Windows Fast Startup
     
    Turn off the PC - pull the plug - hold power button 30 seconds - plug it in, then restart
     
    I'd also turn off OSD - its know to cause issues for others

    Learn your way around the EVGA Forums, Rules & limits on new accounts Ultimate Self-Starter Thread For New Members

    I am a Volunteer Moderator - not an EVGA employee

    Older RIG projects RTX Project  Nibbler


     When someone does not use reason to reach their conclusion in the first place; you can't use reason to convince them otherwise!
    #5
    BairdGoW
    New Member
    • Total Posts : 3
    • Reward points : 0
    • Joined: 2017/07/31 20:45:09
    • Status: offline
    • Ribbons : 0
    Re: 1080Ti ftw 3. Fan closest to the hdmi ports wont stop spinning. 2018/09/10 11:08:48 (permalink)
    Fixed. I tried turning it off and unplugging for about 30 mins last night didn't work. I just tried turning off fast start up but I also disconnected psu from gpu and reseated the gpu after waiting a minute after I took it out. Worked flawlessly, the dotted lines are now at 0 as well. Thanks for the help I have no idea how it managed to get into slave mode. When i bought it, it was in master and worked perfect, thought I had a bad gpu. Thanks for the help.
    #6
    Jump to:
  • Back to Mobile