talkischeap
Superclocked Member
- Total Posts : 185
- Reward points : 0
- Joined: 1/31/2010
- Status: offline
- Ribbons : 0

Waited forever.. Finally got the 1080 Ti kit and installed it onto my FE card and had to share..     Some box porn. (I did the cpu cooler at the same time)  I'll share finished product and temps if people want it once I'm all done. Thx for checking it out.
post edited by talkischeap - Thursday, May 11, 2017 1:02 AM
Mother Board: EVGA Z97 FTWCPU: i7 4790k 4.8ghz - EVGA CLC 280mm Closed loopGPU: EVGA 1080 Ti Founders Edition HybridRAM: Kingston HyperX Savage 16GB 2400MHz DDR3PSU: EVGA SuperNOVA 1300 G2SSD: Samsung EVO 500gb X2 / Crucial M4 128gb (OS) / PNY 480gb. HDD: WD Black 2TBSoundcard: Soundblaster Z / Beyerdynamics DT990 Pro 250ohmCase: Phanteks Eclipse P400s Tempered GlassDisplays: Acer x34 Predator w/Gsync Dell 27" WQHD 1440p Ultrasharp / Vizio M series 70" 4k TV
|
Sajin
EVGA Forum Moderator
- Total Posts : 49227
- Reward points : 0
- Joined: 6/8/2010
- Location: Texas, USA.
- Status: offline
- Ribbons : 199

Re: 1080 Ti Hybrid kit installed! It's go time!
Wednesday, May 10, 2017 0:04 PM
(permalink)
|
yoitsmegabe
New Member
- Total Posts : 33
- Reward points : 0
- Joined: 7/18/2016
- Status: offline
- Ribbons : 0
Re: 1080 Ti Hybrid kit installed! It's go time!
Wednesday, May 10, 2017 1:44 AM
(permalink)
Congrats man! fire it up and overclock it!...and play some freakin games. It's easy to get lost in the enthusiast part of it all.
|
TRClark911
SSC Member
- Total Posts : 565
- Reward points : 0
- Joined: 3/4/2017
- Status: offline
- Ribbons : 0
Re: 1080 Ti Hybrid kit installed! It's go time!
Wednesday, May 10, 2017 2:39 AM
(permalink)
Welcome to the club. Never again with air cooled cards.
|
talkischeap
Superclocked Member
- Total Posts : 185
- Reward points : 0
- Joined: 1/31/2010
- Status: offline
- Ribbons : 0

Re: 1080 Ti Hybrid kit installed! It's go time!
Thursday, May 11, 2017 0:58 PM
(permalink)
TRClark911 Welcome to the club. Never again with air cooled cards.

Thx. I went through a similar situation with my 980ti which i ended up putting a corsair kit + h75 on, but it was a ACX 2.0 cooler not a hairdryer lol. (I added finished product pics!)
Mother Board: EVGA Z97 FTWCPU: i7 4790k 4.8ghz - EVGA CLC 280mm Closed loopGPU: EVGA 1080 Ti Founders Edition HybridRAM: Kingston HyperX Savage 16GB 2400MHz DDR3PSU: EVGA SuperNOVA 1300 G2SSD: Samsung EVO 500gb X2 / Crucial M4 128gb (OS) / PNY 480gb. HDD: WD Black 2TBSoundcard: Soundblaster Z / Beyerdynamics DT990 Pro 250ohmCase: Phanteks Eclipse P400s Tempered GlassDisplays: Acer x34 Predator w/Gsync Dell 27" WQHD 1440p Ultrasharp / Vizio M series 70" 4k TV
|
atavax
New Member
- Total Posts : 3
- Reward points : 0
- Joined: 10/19/2017
- Status: offline
- Ribbons : 0
Re: 1080 Ti Hybrid kit installed! It's go time!
Thursday, October 19, 2017 4:57 PM
(permalink)
sorry if this is a little bit of a necro. I just ordered one of these. I'm curious what kind of lighting options there are. Is this RGB? Can you adjust the brightness?
|
notfordman
Omnipotent Enthusiast
- Total Posts : 8772
- Reward points : 0
- Joined: 8/10/2007
- Location: In a van, down by the
- Status: offline
- Ribbons : 28

Re: 1080 Ti Hybrid kit installed! It's go time!
Thursday, October 19, 2017 5:39 PM
(permalink)
Great looking build, thanks for showing it off.
|
CSN7
iCX Member
- Total Posts : 325
- Reward points : 0
- Joined: 10/19/2014
- Location: Germany
- Status: offline
- Ribbons : 6

Re: 1080 Ti Hybrid kit installed! It's go time!
Thursday, October 19, 2017 7:19 PM
(permalink)
I like the colors, good job!
|
PietroBR
FTW Member
- Total Posts : 1202
- Reward points : 0
- Joined: 9/14/2013
- Location: Brazil
- Status: offline
- Ribbons : 7

Re: 1080 Ti Hybrid kit installed! It's go time!
Friday, October 20, 2017 0:31 PM
(permalink)
atavax sorry if this is a little bit of a necro. I just ordered one of these. I'm curious what kind of lighting options there are. Is this RGB? Can you adjust the brightness?
Looking at the manual for the Hybrid kit, It is RGB, however, it depends on your graphics cards model as well, for it to display RGB colors. https://www.evga.com/support/manuals/files/400-HY-5598-B1.pdf Page 01 and 08. PS: Don't recall the PXOC software being able to adjust brightness. Only on/off option as far as I remember.
|