I have it.  Works great! Nice and solid. I would get it again no question about it!

Honestly I think it sucks. It is flimsy, the screw holes block easy access to screws to hold in the PCIe cards.
 
I saw this one posted on XS today. It looks fantastic. Just wish it was around 6 months ago when I needed it.
http://cgi.ebay.com/Mothe...9c471b4#ht_1022wt_1139

thanks for your inputs on this matter ... and on that tray you linked lowfat i cant tell if it has the 12th hole ... i think i'll email the seller to check for me

Dragin,
 
When MM modified the tray to add stiffness by folding all the edges down by ~ 3/8", that helped a lot with the flimsy feel from what I can tell.  My SR-2 tray is rigid enough with that design change.  I will say that I too saw a slight amount of mis-alignment between the SR-2 and the MM Tray standoff holes.  But it wasn't such that I felt the board had to be warped or anything, just a little tighter fit than I would have liked to see.  Bottom-line, I had no significant issues with my MM tray and love the horizontal placement that it affords me in my MM case.
 
I have no idea what the "hidden 12th standoff hole" is all about.  I used every hole on my SR-2 that I could see.  What is the significance of that hidden hole?

texinga

Dragin,

When MM modified the tray to add stiffness by folding all the edges down by ~ 3/8", that helped a lot with the flimsy feel from what I can tell.  My SR-2 tray is rigid enough with that design change.  I will say that I too saw a slight amount of mis-alignment between the SR-2 and the MM Tray standoff holes.  But it wasn't such that I felt the board had to be warped or anything, just a little tighter fit than I would have liked to see.  Bottom-line, I had no significant issues with my MM tray and love the horizontal placement that it affords me in my MM case.

I have no idea what the "hidden 12th standoff hole" is all about.  I used every hole on my SR-2 that I could see.  What is the significance of that hidden hole?

thanks for you info with them folding down the edges to help out with the flimsey issues ...
 
yes the SR-2 does come with 11 standard standoff locations but there is a 12th hole under the stock chipset heatsin fan that is visable when used with an EK waterblock and would like support in the middle of the board as well since the board is so big and want as much support for it as it possible.
 
here is a picture of what i'm refering to ... the holes circled in Red is the ones you can see from the top ... the one in Green is the one that is hiding under the chipset fan assembly

some may consider it insignificant but i'm a stickeler for want to give this $600 motherboard all the support I can
 
:)
 

hmmmmm ... that auctually looks like it just might work
 ... thanks for the info and looking at your tray as a reference point