Cpt.Derrek
Hi All,
I had similar situations with Eleet X1 not loading and would load a black screen the crash. In Bios for cpu configuration I enabled undervolt protection and presto! Eleet X1 working again! I noticed when opening Intel XTU one of the requirements was that and it fixed my Eleet Issue, hopefully this helps others.

 
I tried this ^^^ and finally, Eleet X1 started working.
 
Thank you!
 

Is this possible to add on Z590 motherboards ?

I'm running the latest firmware for Z690 - v2.13. However Eleet starts with this:

I am worried that it will downgrade the bios and remove support for Intel 13th gen.
Any suggestions to get past this screen?
 
Edit by Cool GTX - removed wall of code from bad photo link
 
PSA adding a photo to your Post - EVGA made some changes - Post Directions below

I'm running the latest firmware for Z690 - v2.13. However Eleet starts with this:
 
Your Z690 firmware needs to be updated.
Click Start to start the process.
*DO NOT TURN OFF WHILE UPDATE IS IN PROGRESS*
 
I am worried that it will downgrade the bios and remove support for Intel 13th gen.
Any suggestions to get past this screen?
 
edit: text only post; I guess the EVGA forum does not like to show images?

shephp01
I'm running the latest firmware for Z690 - v2.13. However Eleet starts with this:
 
Your Z690 firmware needs to be updated.
Click Start to start the process.
*DO NOT TURN OFF WHILE UPDATE IS IN PROGRESS*
 
I am worried that it will downgrade the bios and remove support for Intel 13th gen.
Any suggestions to get past this screen?
 
edit: text only post; I guess the EVGA forum does not like to show images?

Same. Assuming maybe need to wait for the newer version of the program? Back to going to the bios and setting my fans to max while I try to tame the 400 watt i9

sneefy

shephp01
I'm running the latest firmware for Z690 - v2.13. However Eleet starts with this:
 
Your Z690 firmware needs to be updated.
Click Start to start the process.
*DO NOT TURN OFF WHILE UPDATE IS IN PROGRESS*
 
I am worried that it will downgrade the bios and remove support for Intel 13th gen.
Any suggestions to get past this screen?
 
edit: text only post; I guess the EVGA forum does not like to show images?

Same. Assuming maybe need to wait for the newer version of the program? Back to going to the bios and setting my fans to max while I try to tame the 400 watt i9

I went ahead and "updated" with the same firmware. It seemed to have worked, and it was worth it to get ELEET working; happy to get to tune the fan profiles.

The memory tweaking part is only for K processors? 
been trying to activate the MEMORY tab without any successful results 
Im using the 2.12 BIOS version in my Z690 classified.
The fan controller is working properly
 

When I activate Hyper-V or Windows Sandbox (win 11) Eleet x1 stops working, evga precision x1 and DG tuner keeps working fine, but Eleet just crashes. 
is there any way to fix this? 

Turn off Core Isolation memory integrity and always run Eleet x1 as admin.