Will the 3090 Ti Kingpin bios work on the FTW? I tried the strix bios but it disabled one of my display ports (I use all of them).

Laserguy
Will the 3090 Ti Kingpin bios work on the FTW? I tried the strix bios but it disabled one of my display ports (I use all of them).

There isn’t a 3090 ti kingpin vbios listed in this thread. It would most likely work on a 3090 ti ftw3.

Sajin

Laserguy
Will the 3090 Ti Kingpin bios work on the FTW? I tried the strix bios but it disabled one of my display ports (I use all of them).

There isn’t a 3090 ti kingpin vbios listed in this thread. It would most likely work on a 3090 ti ftw3.

Hopefully someone uploads one on techpowerup once they get the new card installed.

Hi
I have EVGA 3080Ti FTW3 Ultra and I was using OC vBIOS and updated its firmware to version 94.02.71.80.86 (using EVGA Percision)
Now I have changed to the Normal vBIOS and Percision only shows 94.02.71.80.74 and no update button next to it (like it means it's up to date)
 
Anyone has the 94.02.71.80.86 for normal vBIOS?

Just wanted to say I have a 3080 LHR with a hybrid kit installed. Still am unable to flash the XOC bios. Same "firmware up to date" message. It flashed to a non xoc hybrid bios fine.

thanks for the XOC bios, it worked for 3090ti ftw3 ultra hybrid.  My 1200 watt power supply or motherboard goes into safe mode with it though(wont boot next day).   I have a old RIVE so it might the pci3 slot or some other incompatibility.  I will need to test on a new platform one day.    it is saved on bios switch OC.  wattage for card was about 440 watts for me.

Does 3090 ti hybrid xoc bios no longer have zero rpm mode? my second fan always spins around 1200 rpm after flashing with that xoc bios. Is this normal? Is there any way I can flash it back to stock? (techpowerup doesn't even have hybrid bios lol) 

arthurz21
Does 3090 ti hybrid xoc bios no longer have zero rpm mode? my second fan always spins around 1200 rpm after flashing with that xoc bios. Is this normal? Is there any way I can flash it back to stock? (techpowerup doesn't even have hybrid bios lol) 

the X1 software still worked you could set fan speed.    

maximiza

arthurz21
Does 3090 ti hybrid xoc bios no longer have zero rpm mode? my second fan always spins around 1200 rpm after flashing with that xoc bios. Is this normal? Is there any way I can flash it back to stock? (techpowerup doesn't even have hybrid bios lol) 

the X1 software still worked you could set fan speed.    

Yours can still do zero % (zero rpm) for the fan on the shroud? My second fan now has a minimum fan speed that I cannot override with a custom fan curve on precision x1...

arthurz21
Does 3090 ti hybrid xoc bios no longer have zero rpm mode? my second fan always spins around 1200 rpm after flashing with that xoc bios. Is this normal? Is there any way I can flash it back to stock? (techpowerup doesn't even have hybrid bios lol) 

 

"EVGA is offering a triple BIOS with their card. You may select between "Performance" (default), "Normal", which runs lower fan noise, and "OC," which turns off the idle-fan-stop capability."

 
If you can find this BIOS switch, try selecting Normal?