I had to reset CMOS to make rebar work. Also, enabling it made my bios laggy so I turned it off. (x570 aorus master F33i)
 
It kept the 450w vbios.

Does the default bios versions also include resizable bar support?

stormtroopa
Does the default bios versions also include resizable bar support?

Yes.

Can you re upload in first page and the default ones executables without RBAR for each version please ?

These ones before the RBAR update for those who want to revert back from xoc
 
Also these are the normal ones (normal switch) ? 

If you wish to go back to the Default BIOS you can find them below:
EVGA GeForce RTX 3080 FTW3 ULTRA Default BIOS - 
EVGA GeForce RTX 3080 FTW3 Default BIOS - 
EVGA GeForce RTX 3080 FTW3 HYBRID Default BIOS - 

Just to be extra sure, if I flash this bios or is automatically flashed from PrecisionX the power limit will be increased only if I change it manually? or it will be increased by default even if I use the stock values of the card without changing them in PrecisionX?

Wonder If Nvidia stocks and evgas will go up after this

aloayzab88
Just to be extra sure, if I flash this bios or is automatically flashed from PrecisionX the power limit will be increased only if I change it manually? or it will be increased by default even if I use the stock values of the card without changing them in PrecisionX?

It doesn't Auto-apply 118% power.  It Allows it only via PX1 or other software manually.  So you need to boot the software ...apply 118% power...then close or leave it open.

Does the Ultra, normal, XOC, rebar bios let you set all the fans to 0%...?

Does the order matter in which we do the following:


a) allow precision x1 to update the firmware
b) update bios
c) update driver to one that ready for resizable bar
 
I've already updated the firmware, so for me that's beside the point, and I'm assuming the motherboard update would be the first thing to do (which I've also already done), but it could be useful for others to know.  I'm waiting for a driver that works with world of warcraft before updating from 457.51.
 
Also, it could also be useful to have a pinned thread with a similar step-by-step guide for people who install hybrid kits.  I ran into trouble with doing things in the wrong order initially when I installed mine a few months ago (including the issue of having to install the bios in this thread (https://forums.evga.com/3080-FTW-Hybrid-Kit-Install-m3177119.aspx) along with the xoc bios, and having to do one before the other (I forget which was the proper order).  Between firmware, dealing with two different bioses, and drivers, the process seems finicky.  So I thought I'd ask here if the process for going about dealing with resizeable bar is also finicky.

Ciddharthas
Does the order matter in which we do the following:


a) allow precision x1 to update the firmware
b) update bios
c) update driver to one that ready for resizable bar
 
I've already updated the firmware, so for me that's beside the point, and I'm assuming the motherboard update would be the first thing to do (which I've also already done), but it could be useful for others to know.  I'm waiting for a driver that works with world of warcraft before updating from 457.51.
 
Also, it could also be useful to have a pinned thread with a similar step-by-step guide for people who install hybrid kits.  I ran into trouble with doing things in the wrong order initially when I installed mine a few months ago (including the issue of having to install the bios in this thread (https://forums.evga.com/3080-FTW-Hybrid-Kit-Install-m3177119.aspx) along with the xoc bios, and having to do one before the other (I forget which was the proper order).  Between firmware, dealing with two different bioses, and drivers, the process seems finicky.  So I thought I'd ask here if the process for going about dealing with resizeable bar is also finicky.

doesn't matter what order

kevinc313
Does the Ultra, normal, XOC, rebar bios let you set all the fans to 0%...?

xoc oc bios does not allow 0%, all I know...