SeanDude05

saunupe1911
My 3080 FTW3 crashes with both bios when playing COD Cold War or Modern Warfare whenever it hits over 2000Mhz and I don't understand it. I have Lian Li case with 10 fans. It never gets over 60C. 

Update windows, update Nvidia drivers, update system drivers, and make sure your power supply is good.

Everything is updated. I'm using a EVGA 1000w Titanium power supply.

On the other hand my memory will overclock to +1000Mhz but I gotta do some COD and Cyber Punk gaming to see if it's stable..then dial it back down. But my Core Clock will only hit 1950Mhz. Power Draw is about 436W.

NVM
found the post.
 

Thanks a lot,Hopefully you will provide support like that in future also.I just cleared about EVGA 3080 Graphics card by reading on a website Techmotherboard

Hi everyone,I tried flashing this bios,but when i choose Yes,the screen goes black for 4 seconds,then the pc reboot itself,and nothing changed.
GpuZ is reporting a maximum power limit of 105%.
Am I doing something wrong?


Edit:
Solved flashing into Windows safe mode

Sajin

akafats
hi i got a ftw3 ultra and i am going to put a hybrid kit on it. Can i use the xoc hybrid bios instead of the fwt3 ultra bios?

Yes, but you'll need the xoc hybrid vbios in .rom format, and you will need to use nvflash to flash it to your card.

 
I recently installed a hybrid kit and would also like to make sure I correctly install the OC bios.  I'm not sure how you do what is described here.  Can someone please elaborate?
 
Edit for clarity: I installed the air-cooled OC bios successfully a couple of months ago, but it sounds like I need to do something different with the hybrid OC bios after installing a hybrid kit, according to the above post.

Hi all the instructions are here.
https://forums.evga.com/3...on-Steps-m3183397.aspx

akafats
Hi all the instructions are here.
https://forums.evga.com/3...on-Steps-m3183397.aspx

Thank you!  That post is great and should be pasted into the original post in this thread imo.

Will there ever be FTW3 'Ultra' Hybrid BIOSes? And when will the stock BIOSes be uploaded?
 
I'm trying to flash the Hybrid bios on my FTW3 Ultra with the Hybrid kit installed, and it says no display adapters were found.

JC this has been discussed a ton and solutions have been posted already. Try searching.

Jacob, I think it will be good if you also posted the "conversion" bioses in the XOC threads or maybe create a new sticky thread with the "conversion" bioses with instructions, people keep asking the same thing over and over...