SirKronan
Dabadger84
On today's docket: Ship the Sennheiser headset I resold, go grocery shopping, and figure out what's going on with my card's thermals being off since the new pads were put on :\
Good luck on the drops today everyone :-D
So... what's going on with your thermals??
anthonyfredsumibcay
TheRealMikeVan
anthonyfredsumibcay
10G-P5-3897-KR - 9/19/2020 7:48:16 AM PT FK YEAH !!!
Overnight shipping yes please !
Enewt please update the time frame for 3897.
Goodluck everyone !
FINALLY!!!! CONGRATS, MY FRIEND!!! 
thank you ! i am official put of the 30's series club lol
Congrats!! Very glad you're getting your card. Enjoy.
On mobile at the moment. Some of them are the same, some are lower. I was expecting further temp reduction. Not sure if I got too thick of pads on some areas or what. I took it back off and the indents from the memory chips are present but not deep, so I think they're the right size. I redid some of them because one wasn't covering the whole chip area. But yeah. I did Port Royal Stress Test to really get the Temps up. VRM Temps are slightly lower than before across the board, but memory Temps are about the same, gpu die /secondary was slightly cooler despite slightly warmer ambient.
I may try swapping to a thinner pad in the middle over the back of the die, maybe uneven pressure is resulting in the Temps being what they are. I touched a VRM heatsink during the PR ST & it was not particularly hot to the touch, so I think I'm getting bad heat transfer somewhere... Or that is the VRM that's already running cool (even after 40mins of Port Royal Stress Test two of the VRM/PWR Temps never went over 36C).