Nereus
 
I don't think many people here care much for miners. Just sayin'...

Nope... miners are the reasons us gamers have had such a hard time getting cards...

pcgamerv2
Kingpin takes center stage in the new build. More info here: https://sprungmass.com/element-29
 

Beautiful build.  Love the copper theme to it.  Well done!  

Hydrocopper, creates a lot of heat, I have 4 480 rads, maybe that helps but runs cold AF, delta 22c under heavy load 3-4 hours - 55c max fans at 1200, 48-50c fans at 1600

Does anyone now if the KINGPIN is susceptible to whatever was bricking cards when playing Amazon's New World MMO?

I believe it was, though most kingpin owners have high end PSUs which helped mitigate the issue for us

There is a thread about this issue.  It seems there is more than just the programming issue related to this problem. Early users found success in limiting their frame rates.  

drax3d
I believe it was, though most kingpin owners have high end PSUs which helped mitigate the issue for us

I some times wonder since this story broke if those that had GPU issues were using these PSUs.  

Gotspeed_2000
There is a thread about this issue.  It seems there is more than just the programming issue related to this problem. Early users found success in limiting their frame rates.  

I actually misspoke a bit here. Some reports indicated that the uncapped framerates in menus combined with overdrawing power to render said frames when equipped with lower wattage PSUs resulted in the issue, other suggest it was just burn out of capacitors.

Overclocker - Biso Biso
 
Hardware - EVGA RTX 3090 KP / EVGA Z590 DARK
 
Port Royal 1x record 19499 with

EVGA RTX3090 K|NGP|N
KINGPINcooling ICON XTREME
KINGPINcooling INFERNO XTREME
Thermal Grizzly KRYONAUT EXTREME

Whoever can handle this, will get a big crown

2835 / 1444 / 1.59v
IDLE -191 / LOAD -187

 

 

 

GTXJackBauer
Overclocker - Biso Biso
 
Hardware - EVGA RTX 3090 KP / EVGA Z590 DARK
 
Port Royal 1x record 19499 with

EVGA RTX3090 K|NGP|N
KINGPINcooling ICON XTREME
KINGPINcooling INFERNO XTREME
Thermal Grizzly KRYONAUT EXTREME

Whoever can handle this, will get a big crown

2835 / 1444 / 1.59v
IDLE -191 / LOAD -187


 

 

 

Just insane!
So if these cards can handle 1.59v with ln2, where are the limits for people that can cool the card to let’s say 20c constantly?
I'm scared to push my card further. Currently I'm at 1.20625v with load line 1 and gpu temps are ~45-50c while benching.