Hey Guys, so i ran into strange issue with my 3090 Kingpin. sometimes when I start port royal with ln2 bios and both nvvdd and msvdd switches enabled my kingpin draws between 450 - 480 Watts. The other time i start it with the same settings it draws 480 -520 Watts. I have this with px1 and with afterburner aswell. Ive also seen it in games where sometimes the game draws 440 - 470 Watts and after changing the map and then go back to the same map it suddenly draws the 500-520 Watts. Settings are always the same. What could be the issue here? Thanks

Kingpin takes center stage in the new build. More info here: https://sprungmass.com/element-29
 

The more I look at this, the more I adore my 3090 FE.
 
STRIXes and KINGPINs clock lower and have higher VRAM temps. Embarrassing.
 
GPU1: NVIDIA GeForce RTX 3090 (pcie 11), CUDA cap. 8.6, 24 GB VRAM, 82 CUs
GPU1: 52C 65% 301W
GPU1: cclock 1125 MHz, cvddc 731 mV, mclock 11001 MHz, Tj 66C, Tmem 84C, p-state P2, pcap power, 415 kH/J

pcgamerv2
Kingpin takes center stage in the new build. More info here: https://sprungmass.com/element-29
 

Outstanding!

Chabster
The more I look at this, the more I adore my 3090 FE.
 
STRIXes and KINGPINs clock lower and have higher VRAM temps. Embarrassing.
 
GPU1: NVIDIA GeForce RTX 3090 (pcie 11), CUDA cap. 8.6, 24 GB VRAM, 82 CUs
GPU1: 52C 65% 301W
GPU1: cclock 1125 MHz, cvddc 731 mV, mclock 11001 MHz, Tj 66C, Tmem 84C, p-state P2, pcap power, 415 kH/J

🤨

Eth speed: 125.794 MH/s, shares: 8373/0/0, time: 79:59
Available GPUs for mining: GPU1: NVIDIA GeForce RTX 3090 (pcie 11), CUDA cap. 8.6, 24 GB VRAM, 82 CUs
GPU1: 49C 65% 301W
GPU1: cclock 1140 MHz, cvddc 731 mV, mclock 11001 MHz, Tj 63C, Tmem 80C, p-state P2, pcap power, 418 kH/J
 
Fan at 65%, ambient 26c, VRAM 80c. I bet nor STRIX, nor KINGPIN, providing both not waterblocked, can't come even close to this hash rate, efficiency and temps. The more I look at this, the more I find 50%+ price premium not worth any of those two.

andi0139
Hey Guys, so i ran into strange issue with my 3090 Kingpin. sometimes when I start port royal with ln2 bios and both nvvdd and msvdd switches enabled my kingpin draws between 450 - 480 Watts. The other time i start it with the same settings it draws 480 -520 Watts. I have this with px1 and with afterburner aswell. Ive also seen it in games where sometimes the game draws 440 - 470 Watts and after changing the map and then go back to the same map it suddenly draws the 500-520 Watts. Settings are always the same. What could be the issue here? Thanks

anyone guys? please

That's a gorgeous build!

pcgamerv2
Kingpin takes center stage in the new build. More info here: https://sprungmass.com/element-29
 

I was about to say, even though the build looks fantastic you might not have enough rad space... then I checked the pictures and saw the external rad^^
 

Chabster
Eth speed: 125.794 MH/s, shares: 8373/0/0, time: 79:59
Available GPUs for mining: GPU1: NVIDIA GeForce RTX 3090 (pcie 11), CUDA cap. 8.6, 24 GB VRAM, 82 CUs
GPU1: 49C 65% 301W
GPU1: cclock 1140 MHz, cvddc 731 mV, mclock 11001 MHz, Tj 63C, Tmem 80C, p-state P2, pcap power, 418 kH/J
 
Fan at 65%, ambient 26c, VRAM 80c. I bet nor STRIX, nor KINGPIN, providing both not waterblocked, can't come even close to this hash rate, efficiency and temps. The more I look at this, the more I find 50%+ price premium not worth any of those two.

I don't think many people here care much for miners. Just sayin'...