My K|NGPIN 3090 rig.
TwoEvilOne's Stormbreaker
 
 
 

talon951
What are you running to generate those temps just out of curiosity? Games, benchmark?

 
Mining ETH which is very memory intensive.  It is running in the background anytime I'm not gaming.  It does not interfere with regular work like web browsing, email, etc.  Right now I'm earning just under $10/day, so that adds up over the long run.

TwoEvilOne

My K|NGPIN 3090 rig.
TwoEvilOne's Stormbreaker

I'm really digging the analog thermometer and hydrometer gauges!
 
Engauge used to make analog RGB gauges for temperature, fan speed, and CPU/GPU utilization over a USB interface but they look to be discontinued now:
speedhut.com/gaminggauges.html
 
The black/blue would look really nice in your build!
 

My KPE gets here later today! Can’t wait for a custom block for it

14 945 - https://www.3dmark.com/3dm/57271130?
Enermax Platimax 1700W
LN2 BIOS
+1350 mem clock / +150 GPU clock / 0 voltage / 121% power target
Classified Tools: NVVDD 1.10625V / FBVDD 1.37500 V / MSVDD 1.0875V / NV Freq. 400 kHz / MS Freq. 400 kHz
NVVDD Loadline Level 1 / MSVDD Loadline Level 1
NVVDD OCP Disable / MSVDD OCP Disable
Ambient temp in my room (around 20-25ºC)
Average GPU temperature 47 °C
Are this good results? Or have I lost the silicon lottery?


Does anyone have any pictures or text indicating what each Dip Switch does?


I've looked all over the box and can't seem to find any brochures indicating what each switch is for.

pclausen

talon951
What are you running to generate those temps just out of curiosity? Games, benchmark?

 
Mining ETH which is very memory intensive.  It is running in the background anytime I'm not gaming.  It does not interfere with regular work like web browsing, email, etc.  Right now I'm earning just under $10/day, so that adds up over the long run.

Yep same exact reason I have that HSF on my backplate. I've got my 3090 and another 3 older Gen cards running (2060, 2080S, 1080ti). Although I had already put the heatsink on just for gaming after noticing how insanely hot the backplate was getting.

_ARXN_

TwoEvilOne
 
My K|NGPIN 3090 rig.
TwoEvilOne's Stormbreaker

I'm really digging the analog thermometer and hydrometer gauges!
 
Engauge used to make analog RGB gauges for temperature, fan speed, and CPU/GPU utilization over a USB interface but they look to be discontinued now:
speedhut.com/gaminggauges.html
 
The black/blue would look really nice in your build!
 
 

Did some poking around because those look awesome. Definitly considering mounting on the external of my caes to get an internal case abient temp.  Newegg has this one that is similar 

Stupid question for y'all, just got my card up & running:
 
Do I need to adjust the angle of the LCD screen myself on the card, or is that done via Precision X1?  And would you recommend for or against using Precision X1 & thereby updating the firmware on the card currently given last I heard the LCD gets borked for some folks with the firmware update?
 
Any recommendations for what to do first?

rjrusso

My K|NGP|N build

Very nice! I love to see these builds in the Lian Li O11D. Quick question for you...with the K|NGP|N setup in a push-pull configuration like that, are you not able to fit a rear fan in the case? Same thing for the CPU rad on the side, does the tubing at the bottom prevent you from fitting a third fan there?

"Do I need to adjust the angle of the LCD screen myself on the card, or is that done via Precision X1?" - you're joking, right?