zaphrodbox

pozzallo
Installed my bitspower waterblocks to my Kingpin cards in sli. Temps before on air-cooling while playing Civ 6 were 68' C for top card and 65' C for bottom card. 2038 mhz core 5800 mhz memory. Now on water-cooling 37' C top card and 35' C for bottom card 2050 Mhz core 5900 mhz memory and cards do not down clock for temp while playing Civ 6. I will overclock the cards some more later but great temps on water-cooling. The kingpin cards really need to be put on water to overclock them.

 
Hell yeah!  I guess that answers the question of whether or not BitsPower makes good blocks or not.  I mean, I assumed they would because of their fittings, but there just is not a lot of reviews out there in the wild on their blocks it seems.  Well you made my day, now I really cannot wait to finish up the the design and milling of my water distro plate and get my loop installed.  Thanks for posting!

I started a new post
 
 
GTX 1080 ti Kingpin in sli watercooled with Bitspower waterblock Temp
 

Sorry to resurrect this thread but I flashed my kingpin hc to (86.02.39.41.90) and it says I'm doing +150, however; the voltage never moves from passed 1062mV? So confused 

puterg33k
Sorry to resurrect this thread but I flashed my kingpin hc to (86.02.39.41.90) and it says I'm doing +150, however; the voltage never moves from passed 1062mV? So confused 

This should help... https://forums.evga.com/G...erburner-m2820280.aspx

Hello Mr sajin i need help with my 1080ti Kingpin..
I have read all the guides etc and all the ways to make an decent OC but i have problems..
When i use the Clasified software for plus voltage my clocks are falling down...I dont have EVbot i have only connect the usb2 header..
My stable clocks are +40 core and +500 memory ...i need something at least 2100MHz or  2150MHz ! when i manage to do it i am going to buy a waterblock so i can have low temps !

Sajin
Benefits:

1. Higher fan speeds.
2. 150% power target.
3. It will prevent you from running into the 118% power limit in unigine superposition as shown .

You can download it .
 
Note: Nvflash is included with the vbios. 
 
How to flash the extreme watercooling oc vbios to your kingpin...
 
#1 Drag and drop the nvflash folder onto your desktop.
#2 Shutdown your pc.
#3 Unplug pc from wall socket.
#4 Hold case power on button for 30 seconds.
#5 Locate the vbios selector switch on the video card & move it to one of the other vbioses other than normal. I'd recommend putting the vbios on the oc switch to retain thermal protection, but you can put it on the ln2 switch if you want to disable thermal protection.

#6 Plug pc back into wall & boot the system.
#7 You're ready for flashing...



Flashing procedure:

#1 Run command prompt via administrator. 
- Windows 7: Press the start button and type "cmd", right click "cmd" and select run as administrator.  
- Windows 8/10: Press the Windows Key & X keys together, select command prompt (admin) from the menu that pops up.
#2 Type the following commands into the command prompt... "cd  c:\users\your windows user name here\desktop\nvflash" without quotes and hit enter. 
- Type "nvflash64 --protectoff" without quotes and hit enter. (Turns off write protection on the card. Some cards will need to have this disabled before you can flash the card so always perform this command before flashing.) 
- Type "nvflash64 -6 6798X390.rom" without quotes and hit enter. 
#3 You'll be asked if you want to override/update the display adapter firmware. Press "Y" on your keyboard to say yes. Nvflash should now start to flash the ftw3 hyrbid vBIOS to the card and complete by saying the flash was successful. 
#4 Restart PC. The nvidia drivers should automatically detect and install the card, if not, you may need to uninstall the drivers and re-install them.

Can you help me please ?
My rig is
i9 10900K on hydro EK AIO D-RGB 360
16GB ram 4400
Asus z490 hero
850 watt corsair Gold

Running 1.2v on the core via the classified tool along with running the xoc vbios (requires contacting Vince aka Kingpin) to get it should get you there.

Is there any email so i can contact him ?
i have to send him serial number ?
Thank you very much for the help :-)

Sent you a pm.

Sorry i cant pm you because i have under 10 posts :D
Thnx for the help..I just sit and wait for the holy bios :D
I want to ask you for the silicon lottery...I think my Kingpin is not so good ...The best MHz on core is 2050 from that point and over 3dmark crashes..Is this normal ? I am on average ? i see here some guys made 2100MHz !!!!! My temps are very low but still 2050MHz with 1.093V is my best !

IIRC the best I could do with mine at 1.093 was 2085, and then once I used 1.2v and was able to do 2152.

Sorry for my anticipation but still nothing :(  5th day :(
Is there any other way to find it ? etc  some forums  or something else..