So, have tried xoc bios in gaming, benching on my air. So if card runs around 420w of power its around 150% tdp the air icx coolers on 100% can done the job to keep card at 60-65C. But if pushing around 500w
which are around 180% tdp what I see when using Superposition 8K bench at 1.100v it goes to 70+C... So I made 140mm fan to cool the backplate and 80mm high pressure fan below the GPU fan to push more air flow. So I suggest that on stock air icx it will not hold good more than 150% tdp which are around 420w of total power... Just my impressions. Tried to run Superposition 8K at 1.150v, but at 600w the temperature go over 70C after around 8-10 scenes.. :)

Will this bios work with FTW3 (11G-P4-6797-K1)?
Slave bios 86.02.39.41.92
 

angeldie
Will this bios work with FTW3 (11G-P4-6797-K1)?
Slave bios 86.02.39.41.92

No. If you're looking to fix the power limit issue see this thread.

Sajin

angeldie
Will this bios work with FTW3 (11G-P4-6797-K1)?
Slave bios 86.02.39.41.92

No. If you're looking to fix the power limit issue see thread.

Thanks for helping

No problem. 

Hi, 
Great topic. I'll try this extreme oc bios right now.
My voltage is locked at 1.012V, even if I rise the voltage controller to 100%. I've tried with the normal bios and the OC bios and it didn't change.
Is it normal with this card? 
 
Thank you.
 

Increasing the voltage slider to 100% doesn't actually make the card run at its maximum voltage of 1.093v. Raising it to 100% just allows the card to use up to 1.093v if needed. If your card is only using 1.012v then it may not need to use up to 1.093v for whatever you're trying to do. What are your clocks running at when the card is using 1.012v?

I pushed the card to 2100mhz. My card is a kingpin Hc.
Thank you.

Sounds like your card is working great. 

Thank you Sajin.