2017/04/24 06:17:39
ConductorJ
bal3wolf
ConductorJ
bal3wolf
Mannyfit75
bal3wolf
Mannyfit75
This is what GPUID detected.


same as my card i flashed the bios shows.
1376x4=5504 or 1376=11,008 so its running 11Ghz memory


So my GPU is good to go then?


yep if your seeing 1376 it means the memory was bumped up.




Interesting.  I flashed the slave with the new primary to test with on my 1080 FTW2 and it still shows 1251MHz for memory in GPU-Z.  However, the bios version shows 86.04.38.40.81, which I believe is the new firmware.


did you uninstall your drivers and reisntall them also reset any profiles in your gpu overclock tools.




I did not reinstall or reset anything after the bios update. Before the bios update I had not tinkered with anything in PXOC and everything should be default.  Regardless, good suggestions.  I will try uninstalling and reinstalling the drivers and PXOC tonight.  Thanks
2017/04/24 06:42:25
Mannyfit75
bal3wolf
ConductorJ
bal3wolf
Mannyfit75
bal3wolf
Mannyfit75
This is what GPUID detected.


same as my card i flashed the bios shows.
1376x4=5504 or 1376=11,008 so its running 11Ghz memory


So my GPU is good to go then?


yep if your seeing 1376 it means the memory was bumped up.




Interesting.  I flashed the slave with the new primary to test with on my 1080 FTW2 and it still shows 1251MHz for memory in GPU-Z.  However, the bios version shows 86.04.38.40.81, which I believe is the new firmware.


did you uninstall your drivers and reisntall them also reset any profiles in your gpu overclock tools.




I'm good, someone pointed out to me where to find the updated 11 Ghz.
2017/04/24 06:53:01
c4rLo5
So is anyone game to flash the new bios to the original 1080 FTW?
2017/04/24 07:02:18
NGL_BrSH
I finally went through the process of DDU, reinstall driver.
I did not reset my precision profile.
It now dials down to 253 gpu, 405 mem at idle.
 
Thanks for the extra push.
2017/04/24 07:45:06
bg8780
Any hopes of seeing this on Founder's cards? Do the FE's run different memory chips?
2017/04/24 08:21:29
bal3wolf
c4rLo5
So is anyone game to flash the new bios to the original 1080 FTW?




I have it on my hydro copper ftw works great our cards should be close just with a water block.
2017/04/24 17:46:55
drendali

2017/04/24 18:23:28
Darthbaggins
Has anyone successfully flashed a SC with the new BIOS?  I have mine under a EK Fullcover block, seeing mention of a HC FTW working w/ it.
2017/04/25 06:27:31
suceone
Perfect Job EVGA.
 
I´m upgrade from my sc 1080!
2017/04/25 07:44:09
M4gic87
It also runs on the FE Referece-Board with Accelero Mono Plus Cooler.
Thumbs up for this BIOS!
Without OC ~1970 MHz Core Clock and with OC (without rising the Voltage) up to ~2130 MHz.
More isn't stable :-)

Use My Existing Forum Account

Use My Social Media Account