EVGA

Z390 Ace + EVGA 1660 all items power on, no GPU output

Author
Post
Essentials Only Full Version
docdj
New Member
  • Total Posts : 4
  • Reward points : 0
  • Joined: 2019/07/21 05:53:20
  • Status: offline
  • Ribbons : 0
2019/08/11 12:58:16 (permalink)
I have a new Z390 Ace+ Intel 9700K + GeForce 1660 (1667-kr7) + 850 W PSU. Equipment i sconnected OUTSIDE the cabinet for pre-test.
When I turn on the PSU, the mobo "power" button lights up. When I press it, the GPU & cooler fans spin, RGB RAM lights up and mobo error LEDS indicate 00. But there is NOTHING on my DVI connected monitor (which was working on another system). The DVI cable is brand new, as are al the other parts. When I press the monitor "menu" button, it says it is in power-saving mode.
 
I have triple checked all connectors for tight connection.
 
ONE worrisome point: the GPU wobbles side to side in the PCI-e slot (closest to the CPU), although I have pressed it secretly into position. And yes, I have connected the 6+2 pin cable (8 on one end into the PSU, 6+2 on the other end with all 8 plugged in).
 
I would appreciate any suggestions for testing/fixing this problem.

Live long and prosper and thanks for all the help!
#1

4 Replies Related Threads
    sparetimepc
    CLASSIFIED Member
    • Total Posts : 2413
    • Reward points : 0
    • Joined: 2009/11/13 09:24:09
    • Location: Altona, IL
    • Status: offline
    • Ribbons : 27
    Re: Z390 Ace + EVGA 1660 all items power on, no GPU output 2019/08/11 13:08:19 (permalink)
    Are you saying the card is sliding back and forth within the slot itself? If so that's not right, if another slot is available put your GPU in it and check to see if it works. If it's actually sliding within the slot it's a bad pcie slot or bad pcie on the card itself.




    #2
    docdj
    New Member
    • Total Posts : 4
    • Reward points : 0
    • Joined: 2019/07/21 05:53:20
    • Status: offline
    • Ribbons : 0
    Re: Z390 Ace + EVGA 1660 all items power on, no GPU output 2019/08/11 13:54:00 (permalink)
    The card isn't sliding within the slot, but "rocking" side-to-side (cross-wise). I tried another slot and it was the same. HOWEVER, I got it all working. The VGA power connection at the PSU was not in tight enough. If there is supposed to be a "click", it isn't very loud. It's an EVGA Supernova 850 G3 Gold +.
    But thanks very much for the quick reply!!! Great to know people are out there watching and helping!! 

    Live long and prosper and thanks for all the help!
    #3
    GTXJackBauer
    Omnipotent Enthusiast
    • Total Posts : 10335
    • Reward points : 0
    • Joined: 2010/04/19 22:23:25
    • Location: (EVGA Discount) Associate Code : LMD3DNZM9LGK8GJ
    • Status: offline
    • Ribbons : 48
    Re: Z390 Ace + EVGA 1660 all items power on, no GPU output 2019/08/11 21:16:40 (permalink)
    docdj
    The card isn't sliding within the slot, but "rocking" side-to-side (cross-wise). I tried another slot and it was the same. HOWEVER, I got it all working. The VGA power connection at the PSU was not in tight enough. If there is supposed to be a "click", it isn't very loud. It's an EVGA Supernova 850 G3 Gold +.
    But thanks very much for the quick reply!!! Great to know people are out there watching and helping!! 




    Glad to see your issue fixed. 
     
    It's the simplest things that are overlooked sometimes that are the culprit.  Don't feel bad, we've all been there.

     Use this Associate Code at your checkouts or follow these instructions for Up to 10% OFF on all your EVGA purchases:
    LMD3DNZM9LGK8GJ
    #4
    sparetimepc
    CLASSIFIED Member
    • Total Posts : 2413
    • Reward points : 0
    • Joined: 2009/11/13 09:24:09
    • Location: Altona, IL
    • Status: offline
    • Ribbons : 27
    Re: Z390 Ace + EVGA 1660 all items power on, no GPU output 2019/08/11 22:31:58 (permalink)
    That's great, enjoy.




    #5
    Jump to:
  • Back to Mobile