Hey fellas, I'm having a little trouble with my overclock remaining solid.
As can be seen in the Overclock pic i have overclocked my 7700 to 5Ghz & VDroop is dissabled.
If you check the CPU State pic you can see i have turbo & EIST enabled.
However when i boot into windows my core speed ranges from .8Ghz upto 5Ghz obviously depending on what load the rig is under.
I was under the impression with the overclock & CPU states i have set this should result in a solid 5Ghz overclock regardles of the load ( Am i mistaken in this assumption ), If so how would i set my bios to keep the overclock solid.
I know alot of you will wonder why i would want to keep the cpu locked @ 5Ghz as keeping this setup running will prolly reduce the lifespan of my CPU which i undestand.
But if i set a speed i would like to see it remain @ the set speed & not fluctuate.
Any help would be greatly appreciated.
On a side note how does a CPU with a base clock speed of 4.2Ghz drop to .8Ghz under windows.
Also this is on a completely fresh install of windows done about 2 hours ago on an M.2 SSD mounted in the M.2 slot under the graphics card.
If you need anymore info regarding setup please ask.
post edited by paul1967 - 2020/04/21 06:26:17
Attached Image(s)
