Welcome to the forum :) - I wanted to show you my XPC-Table project that I recently woke up.
This project started February 22, 2015 and ended March 13, 2017. I have devoted more than 140 man-hours to making the table / casing.
The XPC-Table was made of MDF - Ash veneered ash, there could be no black matt paint and three layers of semi-gloss varnish. The complete set is a glass top and RGB LED backlight.
The project is based on the following components:
CPU - Intel I5 4670K
RAM - Kingston FURY - 16GB DDR3 (4x4GB) DDR3 1866MHz CL10 DIMM
Motherboard - MSI Z97A GAMING 6
PSU - DEEP COOL DQ750EVO 750W
GPU - 2 X EVGA Nvidia GTX 970 4GB SLI
SSD - 2 x Kingston HyperX Savage 120GB SSD
WATER COOLING - Costum LC by OCCOOL and PHOBYA
Accessories - MIONIX
FAN - Noctua and OCCOOL
The SLI EVGA GTX 970 graphics cards and CPU are cooled by the LC. On both sides there are 360mm coolers, each with six fans. Ventilators from Noctua and OCCOOL provide good ventilation.
The basis of the platform is the MSI Z97A GAMING 6, which has been beautifully repainted. The system and other things are stored on two Kingston HyperX Savage 120GB SSDs. The whole is complemented by 16GB RAM Kingston FURY DDR3 1866MHz CL10 DIMM.
750 W power supply from DEEPCOOL is supplied to the set. It could also run out of mouse, keyboard, mouse rods and headphones - all of these components were sponsored by MIONIX.
Thanks to the sponsors because without you this project would not have originated. I hope you like the project :)