https://www.techpowerup.com/256142/tecware-vxr-nexus-c-vega-m2-micro-among-other-cases-on-display-at-computex-2019 ***Techpowerup reported live from Computex 2019***
While visiting the Tecware exhibit, we took the time to check out the numerous cases they had on hand. We started with the VXR dual chamber chassis which was eye-grabbing, to say the least. Featuring a dual chamber layout, it had a sandblasted aluminum exterior with front and side tempered glass panels for getting the best possible view of your hardware. While some cases with such a layout can be starved for air, Tecware took that into account with increased airflow and cooling configurations being available. That, of course, brings up the potential for dust; however, they made sure to include dust filters to help mitigate the issue. On top of all that, the VXR also has removable HDD/SSD trays for easier installation along with extra space for improved cable management. The VXR has an MSRP of $89.99.
The case we looked at was the M2 Micro, which is a MATX mini tower and makes use of a compact design. It has a matte finish on the front panel with mesh ventilation for improved airflow. Meanwhile, the logo on the front is illuminated by white LEDs. It has a tempered glass side panel as well, which is currently all the rage. Internally the chassis supports MATX and ITX motherboards, graphics cards up to 350mm in length and CPU coolers up to 160mm in height. Top and bottom dust filters are included as well. When it comes to storage, it has 2x 3.5" HDD bays, 2x 2.5" SSD bays. In terms of pricing, the M2 Micro is highly affordable with an MSRP of $45.99
Next up was the Nexus C a compact ATX mid-tower offering that will likely prove more popular with enthusiasts that prefer clean, minimalistic designs. The front panel has a matte finish with full-length side air vents for airflow and like the M2 Micro features a tempered glass side panel. When it comes to dust filtration filters for the front, bottom and top are included. Motherboard support consists of ATX, MATX, and ITX. CPU coolers are limited to 160mm in height. The Nexus C has a listed MSRP of $49.99.
For the RGB enthusiast who needs more than just RGB fans or for those wanting a touch of color and nothing more there is Tecware's Nexus EVO. It is a compact ATX mid-tower chassis that features RGB illumination of the front side vents. Tastefully done it adds a nice subtle glow without being in your face making it quite versatile in that regard. The MSRP is listed as $49.99
The Vega chassis sports tempered glass front and side panels with large side vents on the front panel for improved airflow. It also comes equipped with 3x 120mm RGB fans pre-installed in the front with another 120mm RGB fan in the rear. sIn regards to cooling the case support CPU cooler of up to 160mm in height and radiators up to 360mm in front and 280mm up top. Graphics card clearance is limited to 350mm in length or less. Motherboard support includes ATX, MATX, and ITX while storage options include 2x 3.5" HDDs and 2x 2.5" SSDs.
The last case we looked at was the M1 Micro, a MATX chassis that has support for up to a 360mm radiator in the front and a 280mm radiator up top. This was quite a nice surprise given its compact nature. Air coolers aren't quite as lucky being limited to 160mm in height. Meanwhile, graphics cards up to 393mm should have no issues fitting. To improve cooling performance in this small chassis, Tecware equipped it with a full mesh front panel which was nice to see considering the amount of tempered glass we had seen thus far. Motherboard support includes MATX and ITX. he M1 Micro has a listed MSRP of $43.99 in black and $45.99 in white.
At least these cases are low in price for most modders needs.
