EVGA

Raijintek Intros Arcadia III Mid-tower Case

Author
Post
Essentials Only Full Version
rjohnson11
EVGA Forum Moderator
  • Total Posts : 84932
  • Reward points : 0
  • Joined: 2004/10/05 12:44:35
  • Location: Netherlands
  • Status: online
  • Ribbons : 86
2023/03/27 03:52:45 (permalink)
https://www.techpowerup.com/306480/raijintek-intros-arcadia-iii-mid-tower-case
 
Raijintek today introduced the Arcadia III, an ATX mid-tower case that's designed to be taller than it is deep. The case measures 210 mm x 410 mm x 485 mm (WxDxH), and is made mainly of SECC steel. There are two variants based on the side-panel, the Arcadia III with its 4 mm-thick tempered glass panel; and the Arcadia III ST with an opaque SECC steel panel. Both feature airy mesh front intakes. Both cases only include one fan, a rather premium 120 mm spinner with hydraulic bearings, 43.2 CFM, but with 3-pin DC control.

Inside, the Arcadia III offers a conventional horizontally-partitioned layout with the bottom partition having a cutout for the PSU label to peek through the side-panel. The main chamber has up to 36.5 cm of length clearance for graphics cards (if no fan or radiator is mounted on the front panel); and height clearance of 16.5 cm for CPu coolers. Fan vents include two 140 mm or 120 mm top exhausts, three 140 mm or 120 mm front intakes, a 120 mm rear exhaust, and interestingly, two 120 mm bottom intakes. This gives you room for a radiator as large as 280 mm on top, and as large as 360 mm on the front (not big enough for 520 mm). The bottom vents aren't convenient for a radiator. Storage options include two 3.5-inch bays in the bottom compartment, and three 2.5-inch mounts. The company didn't reveal pricing.
 
There is a lot of competition in this mid tower range, so I think Raijintek will have to be aggressive on pricing. 
 


AMD Ryzen 9 7950X,  Corsair Mp700 Pro M.2, 64GB Corsair Dominator Titanium DDR5  X670E Steel Legend, MSI RTX 4090 Associate Code: H5U80QBH6BH0AXF. I am NOT an employee of EVGA

#1

1 Reply Related Threads
    Hoggle
    EVGA Forum Moderator
    • Total Posts : 8897
    • Reward points : 0
    • Joined: 2003/10/13 22:10:45
    • Location: Eugene, OR
    • Status: offline
    • Ribbons : 4
    Re: Raijintek Intros Arcadia III Mid-tower Case 2023/03/27 19:18:07 (permalink)
    It's not a bad looking case but it's kind of generic to how a lot of other cases look and you have to go with the tempered glass model if you do not want to have the logo on the side. I don't mind company branding but I personally want something a bit smaller than that.

    Use an Associates Code & SAVE 5% - 10% on your purchase. Just click on the associates banner to save, or enter the associates code at checkout on your next purchase. If you choose to use my code I want to personally say "Thank You" for using it. 
     
     
    #2
    Jump to:
  • Back to Mobile