EVGA
Prev Thread
Next Thread

Questions About the nforce 680i SLi and ram....

Author
Post
Essentials Only Full Version
Wanker81
New Member
  • Total Posts : 1
  • Reward points : 0
  • Joined: 3/7/2010
  • Status: offline
  • Ribbons : 0
Sunday, March 07, 2010 12:26 AM (permalink)
Hi there everybody. I'm considering buying a new ram kit for the mobo, and i have some questions about this matter.

It's an 8gb kit, Kingston HyperX.. The frequency is 1333mhz, but as far as i recall the mobo supports only up to 1200mhz right?

AfaIk the only thing happening is that the ram simply just go by the 1200mhz, right?

Does anyone have any experience with this?

I've read a post about this mobo, not being too satisfied about running 4 sticks of ram. Is it an overall issue, or just some single cases of this happening?

Hoping for some kind person,helping me along, giving me advice, as I would call myself close to "rookie" in this subject :)

Best regards

Lasse.


#1

5 Replies Related Threads
    Richard99
    Superclocked Member
    • Total Posts : 176
    • Reward points : 0
    • Joined: 4/23/2007
    • Status: offline
    • Ribbons : 0
    Re:Questions About the nforce 680i SLi and ram.... Monday, March 08, 2010 10:53 AM (permalink)
    Is that RAM DDDR2 or DDR3?

    The 680i only takes DDR2.


    Current settings:
    MB: 680i
    CPU: QX6700 @3200MHz
    RAM: 8GB OCZ @1066MHz @ 2.0v
    OS: Win7 64bit
    #2
    sleeve84028
    New Member
    • Total Posts : 67
    • Reward points : 0
    • Joined: 11/27/2007
    • Location: Metro Detroit
    • Status: offline
    • Ribbons : 0
    Re:Questions About the nforce 680i SLi and ram.... Monday, March 08, 2010 8:25 PM (permalink)
    Also what you read about the 680i only liking 2 sticks of ram is correct.  The memory controller is flaky and running 4 sticks can cause problems.  Stick to two 2GB sticks of DDR2 from your standard company and things will work just fine. 


    Asus 750i [P5N-D |1204 BIOS]
    Intel C2Q Q9550 [@ Stock | 1333 QDR]
    Crucial Balistix 2x2GB [800Mhz | 4-4-4-12 @ 2.00v]   
    Auto    
    Cool IT - TEC Cooler
    Silverstone ST1000-P [100% modular, 1KW PSU] 
    BFG GTX 260 MaxCore55 OC's in SLi   
    nVidia's 197.13   
    X-Fi Xtreme Gamer    
    Win7 64bits - Home Edition
    Couple of fans, hard drives and LED's



    #3
    Kojin
    New Member
    • Total Posts : 11
    • Reward points : 0
    • Joined: 2/17/2009
    • Status: offline
    • Ribbons : 0
    Re:Questions About the nforce 680i SLi and ram.... Tuesday, March 09, 2010 5:07 PM (permalink)
    I have never personally had issues running 4 sticks of RAM, but the problem does exist.
    And if you put RAM that is faster than your motherboard can support, it just runs at the speed your motherboard can handle, you may consider downclocking the ram so it matches what the motherboard can support, but there -should- be no issues with putting RAM in that is faster than the motherboard can support.
    Also make sure it is DDR2 (as Richard99 said), DDR3 will not fit into the RAM slots on the 680i

    q6600
    680i SLI
    8GB DDR2 1066
    Radeon HD 5850
    500GB, 1 TB, 500 GB HDDs @ 7200RPM
    Corsair 750W PSU
    G15v2
    G9x

    #4
    4medic
    New Member
    • Total Posts : 19
    • Reward points : 0
    • Joined: 1/2/2010
    • Status: offline
    • Ribbons : 0
    Re:Questions About the nforce 680i SLi and ram.... Tuesday, March 09, 2010 6:57 PM (permalink)
    I generally gained good experiences using Kingston RAM, but I never used a 8 Gb Kit.

    I mailed the support team because I also want to upgrade to 8 Gb (not to find in the compatibility list). They told me to try corsair, so I ordered the 8 Gb DDR2 800 Kit (Q2X8G6400C4DHX) and hope it arrives tomorrow.

    I will post the results.

    Why do you want to use 1333MHz Ram?
     
    Ps. I never had problems using 4 mem sticks.

    post edited by 4medic - Tuesday, March 09, 2010 7:17 PM

    EVGA Classified3 / i7 980X / EVGA 980 Classified K|ngpin @ SLi / G.Skill 24 Gb / Be Quiet Dark Power Pro 1200 W
    _____________________
    ______________
    Friendly fire isn´t
    #5
    4medic
    New Member
    • Total Posts : 19
    • Reward points : 0
    • Joined: 1/2/2010
    • Status: offline
    • Ribbons : 0
    Re:Questions About the nforce 680i SLi and ram.... Wednesday, March 10, 2010 1:21 PM (permalink)
    Hello to all 680i SLI owners,

    the Corsair Quad Kit (Q2X8G6400C4DHX) has just arrived. I set all mem parameters to "AUTO", changed the 4 x 1 Gb Patriot with the new 4 x 2 Gb Corsair and the PC/BIOS/OS didn´t have any problem.

    Vista 32bit, 7 64bit run stable and memtest86+ v4.00 passed without errors.

    Timing and Voltage were automaticly adjusted as in Jedec#2 with 5-5-5-16 @ 1,8V. The next days I will see if the 4-4-4-12 @ 2,1V are possible with 4 sticks.

    Thanks to Support and Corsair

    EVGA Classified3 / i7 980X / EVGA 980 Classified K|ngpin @ SLi / G.Skill 24 Gb / Be Quiet Dark Power Pro 1200 W
    _____________________
    ______________
    Friendly fire isn´t
    #6
    Home » All Forums » [EVGA Motherboards] » All Other EVGA Motherboards » Questions About the nforce 680i SLi and ram....
    Jump to: