Anyone have recommendations for a good quality PCIe 4.0 riser cable - ideally with the 90 degree adapter where it connects to the GPU.. currently using a 240mm ASUS ROG Strix PCIe 3.0 cable [link], but they don't do a PCIe 4.0 version, at least not yet. (edit: I notice the price on Amazon has been bumped up from almost $50 when I got one to $80 now)
 
I found one by LianLi [link] it's 200mm, but only place I found it in stock just now were asking over $90 + shipping and it was shipped from Dubai..
 
EVGA - would be stoked if you sold these!
 
 
edit: Found another on Amazon - "Linkup" brand - never heard of it, but it claims to be tested on PCIe 4.0 with the RTX 3090, and it's right angle, so I've ordered one [link].
 
 
 

What case are you building in? I need to order one for my Corsair 5000d case, trying to figure out the best length.

pathfindercod
What case are you building in? I need to order one for my Corsair 5000d case, trying to figure out the best length.

 
I currently have a 240mm PCIe 3.0 cable in a Corsair 680X and that is certainly more than long enough, 200mm would have been fine, probably even less. However, I just ordered a Corsair 5000X (same dimensions as your 5000D) so I can put 2 x 360mm radiators in it. I haven't received the case yet so I'm hoping 200mm is long enough. I'll let you know.
 
EDIT: Check out the video below - he uses a Corsair PCIe riser cable which are 300mm long in a 5000D case - look around 3:40 time stamp.. 300mm cable is way more than enough, so judging by that video, 200mm should be ok, certainly 250mm would be plenty.
 

 

I've been using a couple of the Link-up pci-e 4 riser cables with great success. No issues. 
 
Here is the Amazon page: https://www.amazon.com/gp/product/B08GYMQN2G

MackWage
I've been using a couple of the Link-up pci-e 4 riser cables with great success. No issues. 
 
Here is the Amazon page: https://www.amazon.com/gp/product/B08GYMQN2G

Thanks for that, I ordered the 200mm one, just waiting on a case to arrive.
 

Nice! These pics show where the plastic film is that drove a few of us crazy lol

Nereus

Thanks for the pictures. They're really helpful.
It looks like the riser cable prevents use of the x4 slot, PE3. Is that right?

Nereus
 
Depends what you wanted to plug in there.
 

A sound card. The problem is that it's at the bend in the cable which would force a tighter bend in that cable.

Nereus

frankd3

Nereus
Depends what you wanted to plug in there.

A sound card. The problem is that it's at the bend in the cable which would force a tighter bend in that cable.

Might be ok with a longer riser cable that can go over the sound card and back underneath it, in more of an exaggerated "S" shape. That's the problem with a vertical mount GPU - it (usually) looks good, but can limit you in other ways.. unless you make some kind of custom case where the GPU riser cable just goes straight out.
   

Thanks.
I see what you mean. Plus in my case the vertical mounted 3080 (hopefully) might be too close to the glass panel. I better not do this.
But I'm keeping your link to the cable in case I change my mind. It appears you found the best one for Gen4.
 
I just realized that you have the 5000X. I have the 5000D Airflow. Don't you think the card will be too close to the glass?

Buy Linkup riser cable on amazon. Works great

How did this effect your temps?

Nereus

pathfindercod
What case are you building in? I need to order one for my Corsair 5000d case, trying to figure out the best length.

My replacement 5000X case arrived today (not damaged this time) so I briefly put the EVGA Z590 FTW motherboard in and checked out the riser cable for length.. 200mm is plenty (see photos). 150mm should probably be enough.
 

 
 

I don't know why I didn't consider that PCIe 4.0 cables have been made. I heard something about bifurcation allowing one to divide the high-bandwidth PCIe 4.0 lanes coming from one slot. I don't think this has many uses at the consumer level.

Hey man, I just saw all the updates, thank you!  I actually sent all the stuff back to newegg and bestbuy. So I have a nice new sealed up Kingpin Hybrid staring at me again. I questioned my motherboard, memory and psu decisions and decided to send it all back while I could till i finalize my choices.  Thank you for all the details!
 

Nereus

pathfindercod
What case are you building in? I need to order one for my Corsair 5000d case, trying to figure out the best length.

Opened up the 5000X shipping box today and found the side panel completely shattered. Waiting on replacement, should have it in a few days, so I guess it will be next weekend before I can check out the 200mm riser cable for size. :/
 
 

Nereus

pathfindercod
What case are you building in? I need to order one for my Corsair 5000d case, trying to figure out the best length.

Opened up the 5000X shipping box today and found the side panel completely shattered. Waiting on replacement, should have it in a few days, so I guess it will be next weekend before I can check out the 200mm riser cable for size. :/
 
 

Nereus

pathfindercod
What case are you building in? I need to order one for my Corsair 5000d case, trying to figure out the best length.

Opened up the 5000X shipping box today and found the side panel completely shattered. Waiting on replacement, should have it in a few days, so I guess it will be next weekend before I can check out the 200mm riser cable for size. :/
 
 

I've been using the Linkup cable for the past 2-3 months and it's been fantastic so far.