NotoriouS^
Superclocked Member
- Total Posts : 148
- Reward points : 0
- Joined: 2019/03/16 13:01:46
- Location: Oklahoma
- Status: offline
- Ribbons : 1
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
This is just something i thought i would share with the group. I just want to say first, compared to OTHER 3090 KINGPIN's, the chip in my 3090 KINGPIN absolutely sucks, so there's that too. But this is how my card performed as it began life with a AIO when i got it in November/December 2020 and then swapping it over to a Hydro Copper this week. Port Royal Benchmark AIO Run - Best Score - https://www.3dmark.com/pr/976027LN2 BIOS No Classified Tool 5.3Ghz All Core +110 Core ( the maximum my chip will do in port royal, anything over 110 on the core or clocking to 2130MHz during the run was a crash) +1475 Memory Hydro Copper Run - Best Score (so far) - https://www.3dmark.com/pr/1531948LN2 BIOS No Classified Tool 5.3GHz All Core +115 Core (clocked to 2145MHz for a few scenes. went back and forth on certain scenes, some maintained 2115MHz while other scenes maintained 2130MHz)(Also +120 on the core is a crash) +1550 Memory Hoping i can find a way to squeeze a little more but I'm afraid my chip just isn't as good as others and it appears i can't add more the core clock than i am already giving it.
post edited by NotoriouS^ - 2022/04/15 15:20:58
i9 10900K | MSI MEG Z490 ACE | EVGA RTX 3090 K|NGP|N Hydro Copper | G.Skill TridentZ 3600MHz 32GB | Samsung 970 Pro NVMe M.2 | PNY XLR8 2TB NVMe M.2 | EVGA Supernova 1000W P2 |
|
redteamgo
SSC Member
- Total Posts : 803
- Reward points : 0
- Joined: 2013/11/16 13:20:08
- Status: offline
- Ribbons : 3
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 15:39:34
(permalink)
Your scores are not bad for the ln2. The big scores you see are from people using the 1000w bios and the classified tool to control voltage. Ambient temp plays a big role too
CPU: Intel 12900K EK 1700 Quantum Mag AcetelGPU: EVGA 3090 KPHCMB: EVGA Z690 DarkPSU: EVGA SuperNOVA 1600 P+Memory: G.SKILL Z5 6600mhz XMP3NVME: Samsung 980 Pro Gen 4 1TB, Gen 3 970 1TBCooling: MO-RA3 420 P/P 8x200mm Noctua HS PWM, Dual D5Case: Fractal Design Define 7 MOD Rigs!!!
|
Ducrider
iCX Member
- Total Posts : 391
- Reward points : 0
- Joined: 2010/06/01 18:38:12
- Location: Guyton GA
- Status: offline
- Ribbons : 0
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 15:44:58
(permalink)
My 2080ti Kingpin is extremely limited to overclocks until you use the secret bois and classified tools to tweak and control it better. I have to agree the 3090 Kingpin would be the same. I have always felt these cards have amazing potential if using the right soft6and bios. Of course this goes with saying use at your own risk.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 15:50:25
(permalink)
Wow.. guess I should stop crying about my ftw3 3090 that I can bench at around 2150 under volted at.981mv.
Max temp at 35-37c.
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 15:52:08
(permalink)
What temps for your card on water?
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
ramsito82
New Member
- Total Posts : 78
- Reward points : 0
- Joined: 2018/11/23 02:40:24
- Location: Spain
- Status: offline
- Ribbons : 1
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 16:25:05
(permalink)
|
NotoriouS^
Superclocked Member
- Total Posts : 148
- Reward points : 0
- Joined: 2019/03/16 13:01:46
- Location: Oklahoma
- Status: offline
- Ribbons : 1
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 16:59:42
(permalink)
AHowes What temps for your card on water?
at 39c for most of the run then gets to 43c
i9 10900K | MSI MEG Z490 ACE | EVGA RTX 3090 K|NGP|N Hydro Copper | G.Skill TridentZ 3600MHz 32GB | Samsung 970 Pro NVMe M.2 | PNY XLR8 2TB NVMe M.2 | EVGA Supernova 1000W P2 |
|
zippytek
FTW Member
- Total Posts : 1185
- Reward points : 0
- Joined: 2020/10/06 17:25:35
- Status: offline
- Ribbons : 9
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 17:29:40
(permalink)
Card doesn’t suck but if you want higher scores you do need the 1000w and classified or dip switches
|
NotoriouS^
Superclocked Member
- Total Posts : 148
- Reward points : 0
- Joined: 2019/03/16 13:01:46
- Location: Oklahoma
- Status: offline
- Ribbons : 1
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 18:03:33
(permalink)
zippytek Card doesn’t suck but if you want higher scores you do need the 1000w and classified or dip switches
I have the classified and the 1000w BIOS just haven't had the balls to flash the BIOS lol.
i9 10900K | MSI MEG Z490 ACE | EVGA RTX 3090 K|NGP|N Hydro Copper | G.Skill TridentZ 3600MHz 32GB | Samsung 970 Pro NVMe M.2 | PNY XLR8 2TB NVMe M.2 | EVGA Supernova 1000W P2 |
|
AHowes
CLASSIFIED ULTRA Member
- Total Posts : 6502
- Reward points : 0
- Joined: 2005/09/20 15:38:10
- Location: Macomb MI
- Status: offline
- Ribbons : 27
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 18:03:54
(permalink)
Yeah I guess I'll come back when the 5080-5090 kingpin hits and I see whats doing..
Intel i9 9900K @ 5.2Ghz Single HUGE Custom Water Loop. Asus Z390 ROG Extreme XI MB G.Skill Trident Z 32GB (4x8GB) 4266MHz DDR4 EVGA 2080ti K|NGP|N w/ Hydro Copper block. 34" Dell Alienware AW3418DW 1440 Ultra Wide GSync Monitor Thermaltake Core P7 Modded w/ 2x EK Dual D5 pump top,2 x EK XE 480 2X 360 rads.1 Corsair 520 Rad.
|
quick4dr
New Member
- Total Posts : 87
- Reward points : 0
- Joined: 2012/02/13 18:25:11
- Location: USA
- Status: offline
- Ribbons : 0
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 20:06:06
(permalink)
Run ln2 or dice if you want high scores on the kingpin it’s marginally better than any 3090 on ambient.
|
Shraf2k
Superclocked Member
- Total Posts : 156
- Reward points : 0
- Joined: 2021/07/12 20:27:18
- Status: offline
- Ribbons : 1
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/15 22:49:06
(permalink)
|
NotoriouS^
Superclocked Member
- Total Posts : 148
- Reward points : 0
- Joined: 2019/03/16 13:01:46
- Location: Oklahoma
- Status: offline
- Ribbons : 1
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/16 11:10:10
(permalink)
Shraf2k I feel like something might be wrong with your card. this is with the galax bios but I wasn't far behind without it on my 3080ti. https://www.3dmark.com/pr/1417587
It only pulls 430W in port Royal on the 520W BIOS. i tried for weeks about a year ago to figure it out but gave up, nothing i tried worked and with so many mixed reviews on it it just wasn't worth investing more time messing with it. With the slider all the way to 121% it goes to about 108% is as high as i have seen it go.
i9 10900K | MSI MEG Z490 ACE | EVGA RTX 3090 K|NGP|N Hydro Copper | G.Skill TridentZ 3600MHz 32GB | Samsung 970 Pro NVMe M.2 | PNY XLR8 2TB NVMe M.2 | EVGA Supernova 1000W P2 |
|
Shraf2k
Superclocked Member
- Total Posts : 156
- Reward points : 0
- Joined: 2021/07/12 20:27:18
- Status: offline
- Ribbons : 1
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/16 11:30:23
(permalink)
NotoriouS^
Shraf2k I feel like something might be wrong with your card. this is with the galax bios but I wasn't far behind without it on my 3080ti. https://www.3dmark.com/pr/1417587
It only pulls 430W in port Royal on the 520W BIOS. i tried for weeks about a year ago to figure it out but gave up, nothing i tried worked and with so many mixed reviews on it it just wasn't worth investing more time messing with it. With the slider all the way to 121% it goes to about 108% is as high as i have seen it go.
You can generally add about 25+watts to that due to underreporting. Have you flashed the updated bios with fastboot disabled?
|
NotoriouS^
Superclocked Member
- Total Posts : 148
- Reward points : 0
- Joined: 2019/03/16 13:01:46
- Location: Oklahoma
- Status: offline
- Ribbons : 1
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/16 14:45:26
(permalink)
Shraf2k
NotoriouS^
Shraf2k I feel like something might be wrong with your card. this is with the galax bios but I wasn't far behind without it on my 3080ti. https://www.3dmark.com/pr/1417587
It only pulls 430W in port Royal on the 520W BIOS. i tried for weeks about a year ago to figure it out but gave up, nothing i tried worked and with so many mixed reviews on it it just wasn't worth investing more time messing with it. With the slider all the way to 121% it goes to about 108% is as high as i have seen it go.
You can generally add about 25+watts to that due to underreporting. Have you flashed the updated bios with fastboot disabled?
I have
i9 10900K | MSI MEG Z490 ACE | EVGA RTX 3090 K|NGP|N Hydro Copper | G.Skill TridentZ 3600MHz 32GB | Samsung 970 Pro NVMe M.2 | PNY XLR8 2TB NVMe M.2 | EVGA Supernova 1000W P2 |
|
Shraf2k
Superclocked Member
- Total Posts : 156
- Reward points : 0
- Joined: 2021/07/12 20:27:18
- Status: offline
- Ribbons : 1
![](//www.evga.com/community/modsRigs/images/sm_mods_off.gif)
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/16 15:17:30
(permalink)
NotoriouS^
Shraf2k
NotoriouS^
Shraf2k I feel like something might be wrong with your card. this is with the galax bios but I wasn't far behind without it on my 3080ti. https://www.3dmark.com/pr/1417587
It only pulls 430W in port Royal on the 520W BIOS. i tried for weeks about a year ago to figure it out but gave up, nothing i tried worked and with so many mixed reviews on it it just wasn't worth investing more time messing with it. With the slider all the way to 121% it goes to about 108% is as high as i have seen it go.
You can generally add about 25+watts to that due to underreporting. Have you flashed the updated bios with fastboot disabled?
I have
Another way I found I lost power and bench points was cheap extensions or bad connection at the extension. I switched to a set that uses 16awg wire and got back to the levels I was at just using the PSU cables.
|
emmett
SSC Member
- Total Posts : 514
- Reward points : 0
- Joined: 2008/03/30 23:42:22
- Status: offline
- Ribbons : 2
Re: My results - 3090 KINGPIN AIO VS. 3090 KINGPIN Hydro Copper
2022/04/16 23:21:10
(permalink)
5c difference in temps, and not even using classiied tool Yikes. If you can point a portable AC at the radiator you may gain 200-250 points.
Currently using Gigabyte Z370 Aorus Gaming 7 EVGA 2080 TI KingPin Intel 9900K GSkill 3200 EVGA G2 1300
|