EVGA

Helpful ReplyLocked***MODS RIGS, Get your +1 Here! (PLEASE READ 1st POST!- Updated 6/27/2016***

Page: << < ..5152535455.. > >> Showing page 55 of 87
Author
Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/10/18 21:02:55 (permalink)
shaneduce

Gold Leader

Well for a CPU that costs more than 1000 EUR or more than 1200 USD if I'd have to translate the same value.. I would of at least expected it to go beyond the 5.5Ghz mark, if the word badass comes to mention, which it doesn't to me

It's a nice OC if on air compared to it's stock speed, but still for it's price class, it's certainly not worth buying imo. Cheaper CPU's seem to OC much higher speeds than these over priced X series CPU's.

If I were you, I'd try sell it and get the cheaper 3930K or 3820 and do the same speed, which is more fun to me and it gives the end result a much higher value
And this way you'd only save more money too and get more fun out of your OC

I have a friend that work's for Intel here in Portland, OR that let me threw him buy the CPU for $495.00 US. I decited to get the CPU for haft off. This is my first round of OCing it's inpress me that I was able to OC it by 1.5 ghz  to 4.83. 46.0 CPU Ratio and a 105.0 BCLK Frequency. I'm still working @ this if you would not mind helping me by pointing me to a relable guide. Or a set of setting's that would help me. I'm planing on going for 5.0 ghz - 5.3ghz. I don't want to push it too far and blow it up. l0l 

Ah okay then it's a good start in the right direction, but for most people it would be a bad OC since they do have to pay 1000 EUR or more lol, pretty retarded, for that same amount I can buy two 16 Core Opterons and destroy them.
 
But yeah I see what you mean there, 495 USD is a good deal indeed, it's cheaper than a 3930K even, a good deal indeed, I have similar contacts to get my Opterons from, so i see where you are coming at


Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/10/18 21:09:03 (permalink)
Just added Nookie420 to my MR +1 list, there by leaving him a comment and a +1
http://forums.evga.com/fb.ashx?m=1588237
 
So hereby I welcome Nookie420 to the MR +1 club!


KimbaWLion
iCX Member
  • Total Posts : 412
  • Reward points : 0
  • Joined: 2010/07/01 14:02:54
  • Location: Philadelphia, PA
  • Status: offline
  • Ribbons : 1
Re:MODS RIGS, Get your +1 Here! 2012/10/19 07:47:31 (permalink)
When I look at all the water cooling rigs here I so want to do it till I add up the cost! I mean I had to budget JUST to get the low end LGA 2011 I7-3820! I got an AMAZING deal on the Lian Li case that I will NEVER see again so that got a bit of the money! Good thing I live near a Micro Center as they DO have the cheapest CPU prices. I think I am pretty happy with 4.3 GHZ on the cpu and I'll have to wait on the Ivybridge E since Intel will be bringing out the Haswell chip first! This place as given me tons of ideas for things and while my rig is pretty plain compared to some here, I have gotten MANY an idea from here and I will always be grateful for that!
post edited by KimbaWLion - 2012/10/22 10:40:39

Lian Li O11 EVO XL ll Intel 14900K ll Asrock  Nova MB ll Samsung 990 2TB ll WD 850N 4TB ll Toshiba 8gb hdd ll NZXT Kracken Elite 360 ll 64GB Corsair Platinum Dominator ll EVGA 3080 TI ll Asus Rog Loki SFX 850 PSU

Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/10/19 11:59:38 (permalink)
Hmm to me water cooling is over exaggerated for my Workstation needs, it's nice to see it with them OC setups though, it's enjoyable to look at and educate to a certain point  as cable management goes, very handy
 
But for me it's no need, my CPU's are server based, they don't go beyond the load temps of 37 to 38C and I am just using simple ASUS Triton 70 HSF's on them.
 
I can get the temps down to 27C if I go Noctua's, but it's still no where near the threshold temps, which are 80C+ heh, so I am not even worried about that and it saves me much lesser hassle My main system is 3 years and 4 months old now and so far it needs no more upgrades.
 
 
post edited by Gold Leader - 2012/10/19 12:03:34


donta1979
Primarch
  • Total Posts : 9035
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re:MODS RIGS, Get your +1 Here! 2012/10/19 12:21:09 (permalink)


Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

SEBAR
New Member
  • Total Posts : 90
  • Reward points : 0
  • Joined: 2011/06/19 22:31:11
  • Location: San Diego
  • Status: offline
  • Ribbons : 2
Re:MODS RIGS, Get your +1 Here! 2012/10/22 13:25:07 (permalink)
High guys, I updated my rig this weekend.


N
Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/10/23 03:23:44 (permalink)
Gambrinus1

High guys, I updated my rig this weekend.


This looks lovely mate, grats with your upgrades!


shaneduce
CLASSIFIED Member
  • Total Posts : 2017
  • Reward points : 0
  • Joined: 2009/10/21 10:19:14
  • Location: Portland ,Or.
  • Status: offline
  • Ribbons : 3
Re:MODS RIGS, Get your +1 Here! 2012/10/24 01:54:47 (permalink)
Lot's of +1's given 
Plz +1 my rig.
shaneduce
CLASSIFIED Member
  • Total Posts : 2017
  • Reward points : 0
  • Joined: 2009/10/21 10:19:14
  • Location: Portland ,Or.
  • Status: offline
  • Ribbons : 3
Re:MODS RIGS, Get your +1 Here! 2012/10/26 00:44:21 (permalink)
OMG there aRE EVEN MORE RIG'S THAT NEED +1 GET TOO TO YOU'LL.
 
donta1979
Primarch
  • Total Posts : 9035
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re:MODS RIGS, Get your +1 Here! 2012/10/26 06:43:21 (permalink)
Up to date on +1's
 

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/10/28 11:57:14 (permalink)
I hope Chrome M Dragon will make his return to these awesome EVGA forums one day, kinda missing him now :X
 
Anyways Once someone new comes here to this topic I will add him or her to my MR list any day!
 
As for my setups? That are these:
140.) Gold Leader - Blue-Leader
252.) Gold Leader - Firefox
253.) Gold Leader - Sveta
283.) Gold Leader - Gradinko
 
Feel free to give them a +1 too And oh a 5th 2CPU system will be added someday xDDDD


Hardass
Superclocked Member
  • Total Posts : 178
  • Reward points : 0
  • Joined: 2008/01/05 13:04:46
  • Location: S.W. Florida
  • Status: offline
  • Ribbons : 0
Re:***MODS RIGS, Get your +1 Here! (PLEASE READ 1st POST!- Updated 8/18/12)*** 2012/10/28 12:08:54 (permalink)
My SR-X


RVE
5960X
16gb Corsair Plat 2666
Corsair Ax1500i
Case Labs Magnum STH10
http://www.heatware.com/eval.php?id=6447
 
Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:***MODS RIGS, Get your +1 Here! (PLEASE READ 1st POST!- Updated 8/18/12)*** 2012/10/28 13:48:32 (permalink)
Hardass

My SR-X


Nice hardware you got there man, all it needs now is a neat case, as for the Matrix GTX 580's where did they go? :) That Gigabyte looks like  Radeon HD 6970 or so, unless I'm wrong here
 
No matter, I added you to my MR +1 list as Participant 290:
http://forums.evga.com/fb.ashx?m=1588237
 
Also I left you a +1 and a comment :)
post edited by Gold Leader - 2012/10/28 14:21:16


buggyruth
FTW Member
  • Total Posts : 1080
  • Reward points : 0
  • Joined: 2011/08/29 16:57:57
  • Status: offline
  • Ribbons : 3
Re:MODS RIGS, Get your +1 Here! 2012/10/28 16:49:41 (permalink)
Gold Leader
Just gave you a +1 nice mods rig!
Here is a link to my Mod & Build log thread.
http://forums.evga.com/tm.aspx?m=1775249
 
Here are some pics of mine or look at my mods rig page.
http://www.modsrigs.com/detail.aspx?buildid=30949


post edited by buggyruth - 2012/10/28 17:16:33

Attached Image(s)


+1 If you like my Mods-Rig
http://www.heatware.com/eval.php?id=78759
COOLER MASTER HAF X RC-942-KKN1 / EVGA Z77-FTW / Intel I7-3770K  / 2 X Corsair Force Series GT 240GB. SSD Raid-0 / Western Digital Caviar Black WD2002FAEX / G.SKILL Trident X Series F3-2400C10D-16GTX  / 2 X EVGA GeForce GTX 670-FTW+4GB. (04G-P4-3673-KR) with EK GeForce 680 GTX VGA Liquid Cooling Blocks - Acetal CSQ (EK-FC680 GTX - Acetal CSQ) / Swiftech Maelstrom 51/4" dual bay reservoir with dual MCP35X pumps / RayStorm CPU WaterBlock (Intel) Copper / XSPC RX360 Rad  & XSPC EX140
Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/10/28 17:30:21 (permalink)
buggyruth

Gold Leader
Just gave you a +1 nice mods rig!
Here is a link to my Mod & Build log thread.
http://forums.evga.com/tm.aspx?m=1775249

Here are some pics of mine or look at my mods rig page.
http://www.modsrigs.com/detail.aspx?buildid=30949



 
Added you too!
http://forums.evga.com/fb.ashx?m=1588237
 
Also left you a +1 and a comment, would be nice if you did all the other 290 participants, it's not a must, but it would be nice hehe. I am still missing over a hundred +1's and comments, oh well.


buggyruth
FTW Member
  • Total Posts : 1080
  • Reward points : 0
  • Joined: 2011/08/29 16:57:57
  • Status: offline
  • Ribbons : 3
Re:MODS RIGS, Get your +1 Here! 2012/10/28 17:40:01 (permalink)
Gold Leader
Thank you!
I will get them all done, It will take some time. But I don't mind I enjoy looking at them, a lot of creativity out there.
Also I appreciate your hard work on this list, you deserve a
Blue Ribbon
 

+1 If you like my Mods-Rig
http://www.heatware.com/eval.php?id=78759
COOLER MASTER HAF X RC-942-KKN1 / EVGA Z77-FTW / Intel I7-3770K  / 2 X Corsair Force Series GT 240GB. SSD Raid-0 / Western Digital Caviar Black WD2002FAEX / G.SKILL Trident X Series F3-2400C10D-16GTX  / 2 X EVGA GeForce GTX 670-FTW+4GB. (04G-P4-3673-KR) with EK GeForce 680 GTX VGA Liquid Cooling Blocks - Acetal CSQ (EK-FC680 GTX - Acetal CSQ) / Swiftech Maelstrom 51/4" dual bay reservoir with dual MCP35X pumps / RayStorm CPU WaterBlock (Intel) Copper / XSPC RX360 Rad  & XSPC EX140
Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/10/28 18:56:01 (permalink)
buggyruth

Gold Leader
Thank you!
I will get them all done, It will take some time. But I don't mind I enjoy looking at them, a lot of creativity out there.
Also I appreciate your hard work on this list, you deserve a
Blue Ribbon


Hehe thanks for the BR idea, but good ole Afterburner already gave me one for creating and making this list for this project :)


tester300
Superclocked Member
  • Total Posts : 117
  • Reward points : 0
  • Joined: 2012/05/12 21:47:16
  • Location: Puerto Rico
  • Status: offline
  • Ribbons : 1
Re:MODS RIGS, Get your +1 Here! 2012/11/02 11:02:56 (permalink)
Lot's of +1's given....long tine no see
B NEGATIVE
Superclocked Member
  • Total Posts : 167
  • Reward points : 0
  • Joined: 2012/03/23 10:06:03
  • Status: offline
  • Ribbons : 5
Re:MODS RIGS, Get your +1 Here! 2012/11/07 02:28:32 (permalink)
My MOD RIGS entry for MilSpec is up,if you want to +1 its here.....http://www.modsrigs.com/detail.aspx?BuildID=31018
 

 

buggyruth
FTW Member
  • Total Posts : 1080
  • Reward points : 0
  • Joined: 2011/08/29 16:57:57
  • Status: offline
  • Ribbons : 3
Re:MODS RIGS, Get your +1 Here! 2012/11/07 03:14:49 (permalink)
Awesome job your 1st. +1 from me!!! The pipe work is amazing!

+1 If you like my Mods-Rig
http://www.heatware.com/eval.php?id=78759
COOLER MASTER HAF X RC-942-KKN1 / EVGA Z77-FTW / Intel I7-3770K  / 2 X Corsair Force Series GT 240GB. SSD Raid-0 / Western Digital Caviar Black WD2002FAEX / G.SKILL Trident X Series F3-2400C10D-16GTX  / 2 X EVGA GeForce GTX 670-FTW+4GB. (04G-P4-3673-KR) with EK GeForce 680 GTX VGA Liquid Cooling Blocks - Acetal CSQ (EK-FC680 GTX - Acetal CSQ) / Swiftech Maelstrom 51/4" dual bay reservoir with dual MCP35X pumps / RayStorm CPU WaterBlock (Intel) Copper / XSPC RX360 Rad  & XSPC EX140
Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/11/07 05:31:54 (permalink)
Neat job there B NEGATIVE You did a very neat clean job there, are you going to water cool them EVGA GTX 660 Ti's also?
 
Hereby I left you a +1, a comment and I also added you in my MODS RIGS +1 list:
http://forums.evga.com/fb.ashx?m=1588237
 
Welcome to the club mate!
Feel free to give all the other 291 participants a +1 and  acomment too, keep in mind they can give you a +1 & comment alike, just to be on the fair side :)
 
Here are my setups:
140.) Gold Leader - Blue-Leader
252.) Gold Leader - Firefox
253.) Gold Leader - Sveta
283.) Gold Leader - Gradinko
 
Blue-Leader has the EVGA GTX 295 RE's back in use, the EVGA GTX 680 SC SE's are for Project G34.
post edited by Gold Leader - 2012/11/07 05:34:57


retrolock
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2010/05/20 10:44:43
  • Status: offline
  • Ribbons : 0
Re:MODS RIGS, Get your +1 Here! 2012/11/07 22:25:12 (permalink)
Updated my watercooling and videocard guys
Edit: Cant post links yet. just click the mods rigs link thanks 
 
donta1979
Primarch
  • Total Posts : 9035
  • Reward points : 0
  • Joined: 2007/02/11 19:27:15
  • Location: In the land of Florida Man!
  • Status: offline
  • Ribbons : 73
Re:MODS RIGS, Get your +1 Here! 2012/11/08 06:39:46 (permalink)
Got all the new rigs very nice everyone. Please give mine more plus 1's Green Machine.

Heatware   

Retired from AAA Game Industry
Jeep Wranglers, English Bulldog Rescue
USAF, USANG, US ARMY Combat Veteran
My Build
14900k, z790 Apex Encore, EK Nucleus Direct Die, T-Force EXTREEM 8000mhz cl38 2x24 Stable"24hr Karhu" XMP, Rog Strix OC RTX 4090, Rog Hyperion GR701 Case, Rog Thor II 1200w, Rog Centra True Wireless Speednova, 35" Rog Swift PG35VQ + Acer EI342CKR Pbmiippx 34", EK Link FPT 140mm D-RGB Fans. Rog Claymore II, Rog Harpe Ace Aimlabs Edition, Cyberpunk 2077 Xbox One Controller, WD Black SN850x/Samsung 980+990 PRO/Samsung 980. Honeywell PTM7950 pad on CPU+GPU

Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/11/08 07:10:49 (permalink)
retrolock

Updated my watercooling and videocard guys
Edit: Cant post links yet. just click the mods rigs link thanks 


I left a comment, since your system has already been rated by me.
It would look nice with my EVGA GeForce GTX 295 Red Editions too, even due to the red gloom it has


retrolock
New Member
  • Total Posts : 6
  • Reward points : 0
  • Joined: 2010/05/20 10:44:43
  • Status: offline
  • Ribbons : 0
Re:MODS RIGS, Get your +1 Here! 2012/11/08 22:54:04 (permalink)
thanks man! I already rated all your rigs too. I really liked the 295's back in the day, I only got to 260 before jumping to 560ti
Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/11/09 02:46:17 (permalink)
Yeah well, I still use them they run my older games better than the GTX 680 SC SE's.
Games like Descent 1&2 with DXX-Rebirth, UT 2004, Fallout3, Fallout New Vegas, Just Cause2, Call of Duty: Modern Warfare 2 & Minecraft.
 
So actually, I can't miss my GTX 295 RE's, not for a chance. Them GTX 680 SC SE's will be used for a new project.


JGLuxe
CLASSIFIED ULTRA Member
  • Total Posts : 6757
  • Reward points : 0
  • Joined: 2010/10/26 03:19:09
  • Location: Cloud 9
  • Status: offline
  • Ribbons : 17
Re:MODS RIGS, Get your +1 Here! 2012/11/09 03:06:00 (permalink)
+1's are up to date with the list, Nice rigs guys!!

i9-12900ks @ | 128GB DDR4 | RTX 3090 FTW3 ULTRA
 
 
Chrome-M-Dragon
CLASSIFIED ULTRA Member
  • Total Posts : 7522
  • Reward points : 0
  • Joined: 2009/01/17 05:35:05
  • Location: Down the rabbit hole...
  • Status: offline
  • Ribbons : 30
Re:MODS RIGS, Get your +1 Here! 2012/11/11 13:31:29 (permalink)
Alright guys listen up, First off i'm glad to see this still going. Secondly a big thanks to GL for keeping it going. I will be updating post #1 and catching up over the next few days or so. Some sweet rigs in here. Unfortunatly I no longer have my rig, life just does that I guess and I have had to sell most of mine off. the good news on that is if anyone wants to donate to an awesome cause, *waves* :P

People are, well, only Human. We know that. The rule of law is borne out in identifying, condemning, and punishing those who violate the standards on which we all agree. This is exactly what we do in america. -James Inhofe
 
Use any of the codes below for a free hug and a high five! Much love to all you wonderful nerds!
Associate: 5L1LJB5JQ94H892 Affiliate Code: QRXQKO8ZJS

Gold Leader
CLASSIFIED Member
  • Total Posts : 3954
  • Reward points : 0
  • Joined: 2009/05/30 03:06:17
  • Location: Dirksland, The Netherlands
  • Status: offline
  • Ribbons : 65
Re:MODS RIGS, Get your +1 Here! 2012/11/11 18:16:50 (permalink)
Well I made a promise to a good friend which is you So yeah I did my best here As a proud EVGA member keeping this list that i have created and made for your project was the main thing that kept me coming back to this place!
 
We are almost at 300 participants mate! Hard to believe hay!
A lot has been added since I made it, back then only 195 participants were in it, rofl!
post edited by Gold Leader - 2012/11/11 18:19:54


Simba123
CLASSIFIED Member
  • Total Posts : 2844
  • Reward points : 0
  • Joined: 2011/05/10 23:15:21
  • Location: Australia
  • Status: offline
  • Ribbons : 14
Re:MODS RIGS, Get your +1 Here! 2012/11/13 03:03:24 (permalink)
+1s for many, still working my way through the list.
Build log for mine new rig
 



 
 
  
                               
 
Page: << < ..5152535455.. > >> Showing page 55 of 87
Jump to:
  • Back to Mobile